Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
As long as they make them stronger than I wouldn’t mind

-
@Wspeed said:
I am very impressed with the pliers so farMe too. The pliers/cutter/compound leverage is far and away the best part of this MT. It equals or exceeds the utility of the competition. The only improvement might be the addition of replaceable cutters.
some argue that with the added leverage and gripping power the cutters would be easily broken off and abused :ahhh
@powernoodle said:
Yeah, many folks prefer the non-replaceable cutters on the Gerbers, for example, as being less prone to fracture than the replaceable cutters.I do. Gerber's carbide cutters are like SOG's newer files, that is, cr*p

That’s a shame TP :ahhh :ahhh
Have you got a pic of the braided wire you cut
well, actually yes I have. :D After all the drama to cut that d*rn wire I sure was going to keep it

Next to a Rambler and Spirit for size reference, is just what I had laying on the table

Thanks TP

You would think that it is ok to cut wire
Are you going to send it to SOG for warranty
no unfortunately not,
SOG hasn't been very friendly or open to sending things overseas to me in previous comms, even through European dealers and for a price :P so warranty repairs are completely off the table
-
Chris@SOG got back to me today
To say that he will ask the engineers
What they class as soft wire and hard wire
And will get back to meI emailed Chris back and mentioned about the
file quality. As soon as I get a email
I will let you all know what he said
-
A thought on the finish, which seems to be subject to some criticism...
Of course polished or BO would be nicer. However, one can say that the current kind of matte finish has some advantages as well - it's less slippery than polished steel and less prone to reflecting light, so less conspicuous (if you want to be covert) while still being light-coloured enough to find if dropped in the underbrush (unlike BO). Just my 2 €c... -
I like the finish of the PAD
It’s something a bit different
-
Old grill is falling apart. Temporary fix: new bolts. I'll add washers and cut the excess off when I don't feel lazy.
The PAD pliers did well on these small-medium nuts/bolts.

-
Day 5
Loose car floor mat re-tightened with the large flat screwdriver bit in the integral bit grip. Nice thought to add a magnet so as not to lose the bit should you accidentally release the grip.

Sent on my SM-G930F with Tapatalk
-
Got a email from Chris@SOG and this is what he wrote
I don’t have a good answer for you on the file. I’ve alerted Engineering and hopefully that will address the issue.
Here is the answer I got from one of our engineers
As a general rule, if it is non-structural (or not intended to sustain mechanical loads) it is soft wire. One example is copper electrical wire with plastic insulation. If it deoes sustain mechanical loads it is hard wire. Example chicken wire.
Hopefully this helps out.
-
Powernoodle Day 5
*
The "file" on the PowerAccess Deluxe is so poorly made as to be virtually non-functional. It would not smooth out the rough spots on this plastic outdoor garbage bin.* -
I like the finish of the PAD
If I really liked the PAD, I would probably really like the stonewashed finish. But as I pretty much dislike the PAD, it stinks up what I think about the finish.
Current Powernoodle Dynamic Assessment Rating ("CPDAR"): 4/10
I take it you don’t like the PAD then powernoodle

-
@Wspeed said:
Got a email from Chris@SOG and this is what he wroteI don’t have a good answer for you on the file. I’ve alerted Engineering and hopefully that will address the issue.
Here is the answer I got from one of our engineers
As a general rule, if it is non-structural (or not intended to sustain mechanical loads) it is soft wire. One example is copper electrical wire with plastic insulation. If it deoes sustain mechanical loads it is hard wire. Example chicken wire.
Hopefully this helps out.
Thanks Wspeed... a bit noncommittal on the file, that answer

@powernoodle said:
Powernoodle Day 5
*
The "file" on the PowerAccess Deluxe is so poorly made as to be virtually non-functional. It would not smooth out the rough spots on this plastic outdoor garbage bin.*I am not surprised, you won't be surprised to hear. It confirms what I surmised above based on my visual inspection and comparison with real files... The grooves are too shallow and narrow to form actual teeth between them, as should be the case for any file that deserves the name.
Note: the challenge checklist mentions "Find an imaginative use for this tool", as if the authors were somewhat hesitant to use the name bestowed upon it by SOG >:D
-
Yes not the answer we wanted about the file :ahhh
But if someone is going to take this seriously
We might get better tools in the future
And I could still get a reply back from Chris
Ones they have had a look at the file
-
Day 5
Today the light in the bathroom gave up
So a good opportunity to test the Philips driver
As the bit set is to short to reach the screwsNo real problems but the Philips driver would
of been better if it didn’t have that weird shape
A straight driver would of been betterI had to order in that stupid light
As no one around here had one in stock
So as soon as it turns up I will finish the job



-
@Wspeed said:
I take it you don’t like the PAD then powernoodle
I do not, and am going to return the PAD to Amazon. I would keep the PAD if it were just a mediocre MT. But I just feel that SOG has punked me by putting that thing on there that they call a file, when they know full well that it doesn't work. So I'm returning the PAD largely because I don't like being treated like a knucklehead.
Unfortunately, this means that I will drop out of the Challenge. I hate to abandon my comrades, but we don't know how these Challenges will turn out until we try. This is my first failure to complete a Challenge, but the return period on the MT is before the end of the Challenge so its now or never. I'll continue to watch and participate in some way, and maybe carry another SOG for the remainder as a small show of unity with the downtrodden.
I'm still a fan of the PowerLock and PowerAssist, though this experience has diminished my opinion of SOG as a maker.
Powernoodle Rating: not recommended.
Onward and upward!
*
The files on the PowerAssist and PowerLock are not awesome, but they do work. The Gerber MP600 and ST300 have aggressive files.*
*
Today's EDC. The orange Manly Wasp folder is an example of how to produce a superior tool. Its a true quality piece that displays excellent design and manufacturing, and is highly recommended.* -
@powernoodle said:
Powernoodle Day 5
*
The "file" on the PowerAccess Deluxe is so poorly made as to be virtually non-functional. It would not smooth out the rough spots on this plastic outdoor garbage bin.*:o
I am just perplexed now. Your PAD file, from comparing photos, is MUCH more poorly machined than the file on my PAD. I was under the impression that my file was as bad as it got. I was wrong.
Can the file on yours even smooth a fingernail? :ahhhAttached are two photos I took when comparing the PAD file to the PL file. The single cut side is laughable, but the other side shows the cross sections are slightly raised.
@Wspeed said:
I take it you don’t like the PAD then powernoodle
I do not, and am going to return the PAD to Amazon. I would keep the PAD if it were just a mediocre MT. But I just feel that SOG has punked me by putting that thing on there that they call a file, when they know full well that it doesn't work. So I'm returning the PAD largely because I don't like being treated like a knucklehead.
Unfortunately, this means that I will drop out of the Challenge. I hate to abandon my comrades, but we don't know how these Challenges will turn out until we try. This is my first failure to complete a Challenge, but the return period on the MT is before the end of the Challenge so its now or never. I'll continue to watch and participate in some way, and maybe carry another SOG for the remainder as a small show of unity with the downtrodden.
I'm still a fan of the PowerLock and PowerAssist, though this experience has diminished my opinion of SOG as a maker.
I fully understand and would probably do the same if I weren't an MT collector.
I could, at this point, recommend you request a replacement. However, knowing what we now know, I think you'd receive another monumental QC failure.Thank you for having attempted the challenge, powernoodle. I hope that SOG can redeem themselves one day (although I won't be holding my breath).



-
Sorry to hear that you are returning the PAD
And a shame that you have to stop the challengeYes I totally agree about the file it’s a joke
But if that’s the only problem than in my opinion
It’s not a bad tool, but I still have to test all the tools
On the PAD so I still haven’t made my mind up
If it is a good Multi tool or notI hope returning the PAD for a refund goes smooth

-
I think that most tools on any make of Multi tool
Look low quality compared to the Swiss Army Knife tools
-
@Wspeed said:
I think that most tools on any make of Multi tool
Look low quality compared to the Swiss Army Knife tools
Hey W,
I have to respectfully say that isn't necessarily true. For starters, a high polish isn't indicative of better quality(polished tools tend to slip more than other finishes). And second, and I'll stop here, you'd have to hold and use a lot more MTs than you have so far.
As far as files go, the newer Vic stuff IS outstanding, but LM has used files of equal quality in several models. The Rebar is a standout in that regard.
I hope that didn't come off as rude in any way. Just wanted to show the other side of the coin.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login