Powerlock 30-day challenge
-
Thanks, El P.

Yes; I made them from some scrap pieces of Maple.

-
Day 15:
I peened the scissors a bit more and today I got the chance to try 'em out. Plastic bags have been a real challenge for the scissors in the past. Today I'm soaking some beans, so the scissors had to meet it's nemesis.

At first it was a bit of a struggle, but then I realized that the scissors don't cut very well at the pivot point, but do cut fairly nicely closer to the tips. Once I realized that, I was able to make repetitive snips with the tip-half of the scissors and the bag was defeated.
A victory of sorts......
-
Good job Nix

Shame that the scissors still don’t work properly :ahhh
Maybe peen the Scissors again

-
I like the new Avatar, W!

There isn't much play in the scissors now. And the scissors are mostly functional for my purposes. I think I'm going to follow the old saw: "Better is the enemy of good."
I'm going to call these scissors "good enough" and not risk messing them up at this point.

If further use dictates that I peen them some more, I'll hazard that, but for right now.......best to leave well enough alone, I think.

-
Thanks Nix

You never know the scissors might get better with use
:D -
self sharpening scissors like Wenger's might :D
-
Day 16:
Not much going on today, but I did cut the lawn. Before hand, I touched up the mower's blade. The Powerlock's file actually did fairly well in tidying up the edge. After the file, I hit the mower blade with a diamond rod and then got to cutting.

Of course, after cutting the lawn on a hot summer day, a fella deserves to relax with some cold suds......Dutch_Tooler knows what I mean.....

-
Nice one Nix

Good to hear that the file worked better :D -
Back home now and no significant adventures. I was really happy to see there is still some snow lingering up on the peaks of the taller mountains. Snow is water, and water is life. So snow in July means water in the creeks and streams, and life in the rivers and lakes. And that puts a smile on my face.

I did struggle a bit with the scissors again. I'll try to peen them some more in the next day or two. Otherwise, the Powerlock just rode along for the journey. Awlways nice to have a multi close at hand.
Time for a G&T now, so......

One thing I miss about living in the mountains is seeing snow in the summer

-
Nice to see the file came through on the mower blades. The newer PL file isn't good, but it isn't bad like the PAD file either. The older "round end" file is a bit better, but for some reason, SOG has never made a "good" file. Their best files are mediocre to be honest.
You could order one of the older round files from the MT.o store. It would drop in without an issue. The older one has a bigger usable area for sure.
-
Day 17:
Messed around with testing the awl and Phillips driver today.
Used the awl to drill a pilot hole for a standard wood screw:

Awl did a fairly good job with this task.
Next I tried driving the wood screw into the 2x4:

I drove the screw about 1/2 way in. At that point, the resistance led to the driver twisting, flexing, and popping out of the screw head. I then used a standard 1pt Phillips screw driver to drive the screw in a bit further, but it, too, started popping out. I'd say the Powerlock's Phillips worked well as compared to a standard driver, although I did notice significant flexing of the blade in the handle and the handle in the frame, all of which led to the driver tip disengaging from the screw. i.e. 'popping out'.
Lastly, I used the Powerlock to remove the screw from the 2x4. This was fairly tough, but the Powerlock did well and accomplished the job.

The driver tip did get chewed up a bit, but still looks entirely functional. I don't think it would be happy with repeated hard use like this, but it accomplished what I set out to test.
-
That didn’t work to well :ahhh :ahhh
It should be able to work
-
I've been known to use the 1/4" adaptor with a Phillips bit instead of the driver implemented on the PL, with better results

also, I put a LM Blast PH driver on my PL...
-
That looks to be a #2 phillips head wood screw. Please set me straight if I am delusional. The SOG phillips is best used for smaller, #1 phillips screws, but if you grind the driver tip down a bit and put a sharper edge on the four driver edges, it works quite a bit better on #2 screws.

-
G-man, I think you are right. It's probably a #2 Phillips woodscrew. I just grabbed it out of a box of screws, so I'm not absolutely sure, but a #2 Phillips fits it fairly well. I'll confess to not always being fussy about the Phillips driver I pick up to use on a Phillips head screw. And, if all you have is a multitool........
I do like the way the Vic Spirit's Phillips driver is formed to work with #1 and #2 Phillips screws, while not being perfect for either.
All in all, I was satisfied with the way the Powerlock's driver worked here.

-
The Vic #1#2 Phillips driver, found on most of their tools, are fantastic for all medium duty screwing tasks , from my observations.
My Vic explorer was probably involved in rewiring several thousand lamp\chandeliers\sconces at my last job. The SOG #1 Phillips is not a good shape for working on in-between screws or #2s. The driver tip does have enough meat on it to reshape it closer to the Vic shape. :) -
Day 18:
Hot and sunny today. Didn't do much and the Powerlock just rode around in the belt sheath. I'm ready for summer to be over......... :-\

-
Less hot will do for me :ahhh :ahhh
-
Me too :P 33ºC here

-
Seems it is hot all over the globe. We had such a mild winter in Alabama, that the insect problem is severe. Several new tick species coming from South America as well. Insane amounts of wasps and yellow jackets. Ravenous Mosquitoes. Ridiculous humidity. I can't wait for fall/winter. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
