Powerlock 30-day challenge
-
**Day 21 **(continued):
Not a real use, but tested the saw on a damaged limb from an Aspen tree:

Saw worked fairly well. teeth are aggressive and cut well. I noticed a slight tendency for the blade to wander a bit, but for a multi, it worked well.
Limitations here are the the saw faces inward and the handle limits it's ability to access some materials (same for awl inward-facing multis), and the short length of the saw. There is plenty of space in the handle for an additional 5-6mm of saw blade.
A longer saw blade might interfere with the handle cover, but the handle cover could also be made longer, thereby accommodating slightly longer tools. I suppose shorter tools use less metal which saves production costs. Looks like SOG again chose to build a less capable multi in order to save a some money and offer their tool at a lower price. Feels like a case of less expensive being the same as cheap.
-
The saw does look short and the
handle is in the way for thicker wood :(
-
Day 21 (continued):
@Wspeed said:
Yes that doesn’t look comfortable :(
But the LM Supertool is the same when you
use the pliers and hasn’t given me any problems
So, just for you, my dear W, I removed the covers from the Powerlock and then compared the comfort of the Swisstool, Super Tool, and Powerlock. I ranked them in terms of comfort from left (best) to right (least comfy):

It's a nice comparison shot for these 'heavy-duty' multis. The Swisstool was the most comfortable by far. And the Supertool was still more comfortable than the Powerlock. Why?
Look at the comparison shot of the edges:

You can see the the Supertool (middle) has rounded the edges of the handles where possible, and the tools are a bit better covered. The handle material on the Powerlock (right) is thinner and sharper. So, with a good grip, the Powerlock cuts into the hand more.
Now, with the covers back in place, the Powerlock is neck and neck in terms of comfort with the Swisstool.
So, I'm keeping the covers on and accepting inconvenience in favor of comfort.

-
Day 21 (continued):
@Wspeed said:
The saw does look short and the
handle is in the way for thicker wood :(
While I had the tools out, I compared saws.

The shot is a bit deceiving because the handles aren't lined up. I tried to line up the ricassos, but it looks like I shorted the SOG a tad. I'm not sure if that's a distortion of the camera or I bumped the SOG prior to the shot.
Nevertheless, you can see the SOG's saw is short compared to the other multi's saws. SOG had the space to get it's saw to be the same length as Leatherman's--the handles are about the same length. But...no.
While the Leatherman's saw looks a bit longer than the Swisstool saw, the Swiss tool is the clear winner here because there is more usable saw blade since the blade opens outward and there is no handle to get in the way.
-
@Nix said:
Day 21 (continued):The saw does look short and the
handle is in the way for thicker wood :(
While I had the tools out, I compared saws.

The shot is a bit deceiving because the handles aren't lined up. I tried to line up the ricassos, but it looks like I shorted the SOG a tad. I'm not sure if that's a distortion of the camera or I bumped the SOG prior to the shot.
Nevertheless, you can see the SOG's saw is short compared to the other multi's saws. SOG had the space to get it's saw to be the same length as Leatherman's--the handles are about the same length. But...no.
While the Leatherman's saw looks a bit longer than the Swisstool saw, the Swiss tool is the clear winner here because there is more usable saw blade since the blade opens outward and there is no handle to get in the way.
I think the LM still has more usable saw blade. Not much. You will hit the stop on the saw blade first before you hit the handle. Also, you can use the saws with the tool open, keeping the handle out of the way.
-
Nice to see the different models of MTs
With the handles I was looking at the old Supertool
And they haven’t got the rounded edges
If I had the Powerlock I would leave the covers on as well

-
@ducttapetech said:
I think the LM still has more usable saw blade. Not much. You will hit the stop on the saw blade first before you hit the handle. Also, you can use the saws with the tool open, keeping the handle out of the way.Good point!
-
Thanks for the pics, Nix!
I am not sure, why in 20+ years, SOG couldn't have just updated the saw and blades to be longer. They changed the tooth count in the 90s, but left it the same length.

I know they were trying to make all their tools fit the PP, PPP, PL, PAssist, and SwitchPlier; but it really wouldn't have taken much to have a longer saw blade available at some point for the PL and PA.
-
@gerleatherberman said:
Thanks for the pics, Nix!I am not sure, why in 20+ years, SOG couldn't have just updated the saw and blades to be longer. They changed the tooth count in the 90s, but left it the same length.

I know they were trying to make all their tools fit the PP, PPP, PL, PAssist, and SwitchPlier; but it really wouldn't have taken much to have a longer saw blade available at some point for the PL and PA.
I really believe that they've used the same template (piece) of their original saw, which I think was in the PowerPlier,
and they decided to use it on the Powerlock, where it looks a bit short,Spoiler:

and if you put it in the Blacktip it looks puny and stupid :ahhh
Spoiler:

compared to most other manufacturers SOG seems to make short, flimsy tools to put in their huge, tank Multis, ???
with the exception of the PA and Blacktip, I would say the same of their bladesSpoiler:

-
Thank you for the photos, TP!
The saw looks so silly in the BlackTip.

Does your PowerPlier have the saw with fine teeth? Mine does, and the amount of effort to modify the tooling to the newer-style "bigger" teeth would have been a good opportunity to design a new saw especially for the PL. They could have just used the old machinery to make finer-tooth saws for the PP, PPP, and ParaTool. :ahhh
-
Day 22:
Did a bit of yard work this morning. Used the Powerlock to open some bags of compost.......

This evening...and El Peacent has been expecting this, I know...it was roast chicken time!
(Mrs Nix loves roast chicken.)

The Tomahawk is there in case the feeble-feeling blade on the Powerlock wasn't able to meet the task.
However, the Tomahawk was not needed. The SOG's blade did fine. I removed the backbone, the wishbone, the ribs, and spatchcocked the bird.

While the SOG did OK, the blade lost it's edge during this process. In removing the backbone, I tend to 'feel' my way along, severing joints as I go. This results in a little blade-on-bone contact, which seemed to be enough to dull the SOG.
After completing the task, I stropped the SOG to bring the edge right back.
After the chicken was prepped, it was seasoned and grilled for about 45 minutes. Yum!

Thank you, SOG!

(and, yes, I washed the blade after doing yardwork, before cutting up the chicken, and after cutting up the chicken.
) -
Excellent job Nix looks nice

-
@gerleatherberman said:
Thank you for the photos, TP!The saw looks so silly in the BlackTip.

Does your PowerPlier have the saw with fine teeth? Mine does, and the amount of effort to modify the tooling to the newer-style "bigger" teeth would have been a good opportunity to design a new saw especially for the PL. They could have just used the old machinery to make finer-tooth saws for the PP, PPP, and ParaTool. :ahhh
Since I have three PowerPliers (how did I end up with 3 of them? ???) I have what I believe are all the variations, one with the fine smaller teeth, one with the wider and bigger teeth, and one with a Robertson driver instead of a 1/4 driver or an additional Flathead

I haven't compared both saws so I don't really know which would I prefer :ahhh

This evening...and El Peacent has been expecting this, I know...it was roast chicken time!
The Tomahawk is there in case the feeble-feeling blade on the Powerlock wasn't able to meet the task.yes, you knew it :D
To me cauliflower and zucchini testing are essentials to determine the performance of a blade
PS: I once used a Tomahawk in the kitchen (not exactly a tomahawk, it was the Ontario SPAX) and it went through the thing ::) and got stuck into the wooden cutting board below :P, the mark was there for years until we got rid of that board on our last move

-
Day 23:
A few missed photo opportunities today. In the morning I used the large driver bit to pry up the pull-tab on a can of seltzer. So that pretty much saved the day. But no phone or camera, so no glorious action shot.....sorry.
Later, with even more drama, I used the pliers to remove some debris from the engine compartment of Mrs Nix's car. So that was two major rescues in one day, neither of which got documented.
I considered doing some re-enactment shots, but, with the production budget under scrutiny, I opted for a simple nature shot from the garden.

Nice, eh?
So here it is, Day 23, and I have used every tool of the Powerlock, for either it's designed purpose or an alternative, with the exception of the crimper. The rest of this challenge should be pure gravy...........
-
Great pics and uses, Nix!

-
Thanks, G-man.

-
Day 24 :
Time to refill the bird seed bucket.....

-
Nice to see you caring for wildlife Nix

With this hot weather we put
bowls with water out for the wildlife
-
Yes, we've got a big dish of water out near the bird feeders.
The birds love it and we enjoy watching them bathe and drink.

-
Something is a bit fowl about that. :P
Seriously, that is a nice thing to do. I love watching the birds as well. :)
This has been a great challenge thread, Nix! Your photos and uses make me feel lazy. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
