Powerlock 30-day challenge
-
@gerleatherberman said:
Thanks for the pics, Nix!I am not sure, why in 20+ years, SOG couldn't have just updated the saw and blades to be longer. They changed the tooth count in the 90s, but left it the same length.

I know they were trying to make all their tools fit the PP, PPP, PL, PAssist, and SwitchPlier; but it really wouldn't have taken much to have a longer saw blade available at some point for the PL and PA.
I really believe that they've used the same template (piece) of their original saw, which I think was in the PowerPlier,
and they decided to use it on the Powerlock, where it looks a bit short,Spoiler:

and if you put it in the Blacktip it looks puny and stupid :ahhh
Spoiler:

compared to most other manufacturers SOG seems to make short, flimsy tools to put in their huge, tank Multis, ???
with the exception of the PA and Blacktip, I would say the same of their bladesSpoiler:

-
Thank you for the photos, TP!
The saw looks so silly in the BlackTip.

Does your PowerPlier have the saw with fine teeth? Mine does, and the amount of effort to modify the tooling to the newer-style "bigger" teeth would have been a good opportunity to design a new saw especially for the PL. They could have just used the old machinery to make finer-tooth saws for the PP, PPP, and ParaTool. :ahhh
-
Day 22:
Did a bit of yard work this morning. Used the Powerlock to open some bags of compost.......

This evening...and El Peacent has been expecting this, I know...it was roast chicken time!
(Mrs Nix loves roast chicken.)

The Tomahawk is there in case the feeble-feeling blade on the Powerlock wasn't able to meet the task.
However, the Tomahawk was not needed. The SOG's blade did fine. I removed the backbone, the wishbone, the ribs, and spatchcocked the bird.

While the SOG did OK, the blade lost it's edge during this process. In removing the backbone, I tend to 'feel' my way along, severing joints as I go. This results in a little blade-on-bone contact, which seemed to be enough to dull the SOG.
After completing the task, I stropped the SOG to bring the edge right back.
After the chicken was prepped, it was seasoned and grilled for about 45 minutes. Yum!

Thank you, SOG!

(and, yes, I washed the blade after doing yardwork, before cutting up the chicken, and after cutting up the chicken.
) -
Excellent job Nix looks nice

-
@gerleatherberman said:
Thank you for the photos, TP!The saw looks so silly in the BlackTip.

Does your PowerPlier have the saw with fine teeth? Mine does, and the amount of effort to modify the tooling to the newer-style "bigger" teeth would have been a good opportunity to design a new saw especially for the PL. They could have just used the old machinery to make finer-tooth saws for the PP, PPP, and ParaTool. :ahhh
Since I have three PowerPliers (how did I end up with 3 of them? ???) I have what I believe are all the variations, one with the fine smaller teeth, one with the wider and bigger teeth, and one with a Robertson driver instead of a 1/4 driver or an additional Flathead

I haven't compared both saws so I don't really know which would I prefer :ahhh

This evening...and El Peacent has been expecting this, I know...it was roast chicken time!
The Tomahawk is there in case the feeble-feeling blade on the Powerlock wasn't able to meet the task.yes, you knew it :D
To me cauliflower and zucchini testing are essentials to determine the performance of a blade
PS: I once used a Tomahawk in the kitchen (not exactly a tomahawk, it was the Ontario SPAX) and it went through the thing ::) and got stuck into the wooden cutting board below :P, the mark was there for years until we got rid of that board on our last move

-
Day 23:
A few missed photo opportunities today. In the morning I used the large driver bit to pry up the pull-tab on a can of seltzer. So that pretty much saved the day. But no phone or camera, so no glorious action shot.....sorry.
Later, with even more drama, I used the pliers to remove some debris from the engine compartment of Mrs Nix's car. So that was two major rescues in one day, neither of which got documented.
I considered doing some re-enactment shots, but, with the production budget under scrutiny, I opted for a simple nature shot from the garden.

Nice, eh?
So here it is, Day 23, and I have used every tool of the Powerlock, for either it's designed purpose or an alternative, with the exception of the crimper. The rest of this challenge should be pure gravy...........
-
Great pics and uses, Nix!

-
Thanks, G-man.

-
Day 24 :
Time to refill the bird seed bucket.....

-
Nice to see you caring for wildlife Nix

With this hot weather we put
bowls with water out for the wildlife
-
Yes, we've got a big dish of water out near the bird feeders.
The birds love it and we enjoy watching them bathe and drink.

-
Something is a bit fowl about that. :P
Seriously, that is a nice thing to do. I love watching the birds as well. :)
This has been a great challenge thread, Nix! Your photos and uses make me feel lazy. :ahhh
-
G-man, It's not work if you are having fun!
Day 24 (continued):
Used the Powerlock to remove the pins, after test fitting, from a knife I'm finishing up. Pins are tight! And the Powerlock was a great help in pulling them back out.

Knife is epoxied and clamped up now. After the epoxy cures, I'll finish the handle and sharpen up the blade. The blade is one I made from 1095, which is why it's not the most gorgeous thing made. But....should be a nice carry knife.
-
Very nice! I can't wait to see how it comes out!

-
Looking good Nix excellent job

-
Thanks, guys.

There are still many opportunities to make several more mistakes...........

But the epoxy seems to have set up nicely.

-
Day 24 (continued):
Mrs Nix summoned me to go outside this evening. She had discovered some Aspen suckers growing up through a Dogwood shrub and requested they be removed immediately. Well, since the Powerlock was in my pocket.......

I use the wire cutters like secateurs to cut them off, down low. They'll be back, but the Powerlock will still be ready.
-
The SOG wire cutter section is one of the best I know of. Nice job with using them in the yard!

-
Good job Nix

-
@Nix said:
G-man, It's not work if you are having fun!Day 24 (continued):
Used the Powerlock to remove the pins, after test fitting, from a knife I'm finishing up. Pins are tight! And the Powerlock was a great help in pulling them back out.

Knife is epoxied and clamped up now. After the epoxy cures, I'll finish the handle and sharpen up the blade. The blade is one I made from 1095, which is why it's not the most gorgeous thing made. But....should be a nice carry knife.
looks very interesting!!


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
