Pocket Dump picture thread.
-
Thanks for the advice, Valkie! My back has always been well, as I haven't and don't do anything more than necessary to get by properly. And compounding the lame lifestyle is that I've been fortunate to have not been in any serious accidents. I'm not an adventurous person at all. The only thrill seeking I do is collecting MTs/knives and an occasional hookup. Haha
Camping for me is a tent full of packaged snacks and coke zero.
I do have an issue with weak connective tissue in my tendons. I work very hard and exercise enough to keep my weight down, but I was just born with weak tendons. As of right now, my right bicep is permanently non-functional and my left Achilles tendon is ruptured 60%.Anyway, all I was trying to say is, a boring lifestyle can be a good thing, but watch that weight. You know already that a bad back and packing on the pounds is really bad(just a friendly reminder)thing. :ahhh
-
@gerleatherberman said:
Thanks for the advice, Valkie! My back has always been well, as I haven't and don't do anything more than necessary to get by properly. And compounding the lame lifestyle is that I've been fortunate to have not been in any serious accidents. I'm not an adventurous person at all. The only thrill seeking I do is collecting MTs/knives and an occasional hookup. Haha
Camping for me is a tent full of packaged snacks and coke zero.
I do have an issue with weak connective tissue in my tendons. I work very hard and exercise enough to keep my weight down, but I was just born with weak tendons. As of right now, my right bicep is permanently non-functional and my left Achilles tendon is ruptured 60%.Anyway, all I was trying to say is, a boring lifestyle can be a good thing, but watch that weight. You know already that a bad back and packing on the pounds is really bad(just a friendly reminder)thing. :ahhh
Unfortunately, or fortunately, depends on how you look at it, I have always been adventurous.
As a kid I was into bush-walking (more bush running) all over the national parks surrounding Sydney.
Spear fishing, Body surfing, diving off cliffs was all great fun and very strenuous.
As I got older it was Aussie rules football, Abb Sailing and water skiing, but I preferred snow skiing when it was winter.
I got in with some mates and had a go at rally driving an old Renault 10, until I rolled it (not my fault, the navigator said easy right, then screamed "NO Hard Left" a little too late.
I took up martial arts in my late 20s and fought competitively for a few years (I use that term loosely, I want very competitive, best I ever did was 3rd place)
Several motorcycle (and subsequent crashes) were all great fun, my last bike was a Honda 1500cc 6 cylinder which I loved until my vertigo started playing up.
I have a boat now for off shore work and the poor old body cops a real beating smashing into and over waves.Looking back on it all, at 60 im not too bad
I can still walk (with a limp)
I can still work (and hate it)
I can still do most things, even sinking holes for a fence by hand.But I can see the next few years getting less and less strenuous.
Rebuilding my bathroom last year was murder, and tiling it killed my knees.The first time I did it 25 years ago I don't remember it being so hard.
Yep, getting old, getting fat, that's life.
But what a hoot its been.........so far.
-
That's good looking on the bright side. Lots of great memories of some great activities and accomplishments for sure.

-
@gerleatherberman said:
I do have an issue with weak connective tissue in my tendons. I work very hard and exercise enough to keep my weight down, but I was just born with weak tendons. As of right now, my right bicep is permanently non-functional and my left Achilles tendon is ruptured 60%.Hy, GLBM, another thing we have in common :D

I have issues and problems with tendons since teen years, and have had to do exercise to strengthen and lengthen them for lots of years
Dem darn tendons still give me trouble occasionally! :P
Some edgies from my gear/carry, same SAK and Wave than yesterday, an Opinel and a box cutter too
All others are for show

-
@ThePeacent said:
Hy, GLBM, another thing we have in common :D
I have issues and problems with tendons since teen years, and have had to do exercise to strengthen and lengthen them for lots of years
Dem darn tendons still give me trouble occasionally! :P
Some edgies from my gear/carry, same SAK and Wave than yesterday, an Opinel and a box cutter too
All others are for show

I wonder if our excessively heavy EDCs are causing tendon issues?

Sorry to learn you have to deal with the tendon issues as well. A lot of folks don't know that it's easier to deal with broken bones than ruptured tendons. :ahhh
Nice group shot today, TP!
-
Got really light today. The pocket caddy is great but somewhat large. I traded it for a belt clip, awlso traded the Laggy and Executive for the Compact.
-
I'm amazed at some of the pocket dumps.
Some beautiful tools and knives.
Some interesting stuff.
I was thinking, What is the motivation for the various accoutrements?
I carry a simple tool because I've always carried one, ever since I was a scout
Keys just seem to grow, (has anyone else noticed how car keys just keep getting bigger?)
A torch, with the LED on offer these days, is invaluable.
Especially when you drop something in the car at night, sooooooo many nooks and crannies.Watches, wallets, par for the course, but I also carry a change purse.
The coins start filling pockets far too rapidly for me.A pen is usually helpful, but I use a propelling pencil, easier to use on greasy drawings in the workshop.
-
I do antiques restoration. Anything from old telephones to 8' tall wardrobes. I'm always needing MTs (two at once sometimes), bit sets/blades, lights, measuring tapes, loupes (detail work), lighter (melt filler wax and awful smoke), and watch (I am obsessive about time). On my off-days, I over-carry, because I am used to having certain gear available. I carry a very slimmed down EDC on off days and rotate the tools I carry for fun. I collect MTs and watches, so that is why I am always posting different EDC setups. I have about 30 "user MTs"(doubles of collection pieces, of which there are almost 240 collection MTs).
I am single with no kids, so I buy stuff I don't need all the time.
I hope my reasoning makes sense, Valkie.

-
@gerleatherberman said:
I do antiques restoration. Anything from old telephones to 8' tall wardrobes. I'm always needing MTs (two at once sometimes), bit sets/blades, lights, measuring tapes, loupes (detail work), lighter (melt filler wax and awful smoke), and watch (I am obsessive about time). On my off-days, I over-carry, because I am used to having certain gear available. I carry a very slimmed down EDC on off days and rotate the tools I carry for fun. I collect MTs and watches, so that is why I am always posting different EDC setups. I have about 30 "user MTs"(doubles of collection pieces, of which there are almost 240 collection MTs).
I am single with no kids, so I buy stuff I don't need all the time.
I hope my reasoning makes sense, Valkie.

Perfectly reasonable.
I build wooden clocks for a hobby.
Wood hand made gears, etc
The only metal is the shafts.But my other hobby is weapons for my daughters comiccon.
I need my MT for that to get into the fiddly bits.
Only wood, no metal at all.

-
A very interesting and admirable set of hobbies and side-projects, Valkie.

I love clocks and have always liked the really really antique wooden-movement clocks. The only clocks, I encounter in my day-to-day life, with wooden movements are more modern Cuckoo clocks. Thats some cool stuff you pictured there. I imagine it takes great patience to build wooden clock mechanisms.

-
@gerleatherberman said:
A very interesting and admirable set of hobbies and side-projects, Valkie.
I love clocks and have always liked the really really antique wooden-movement clocks. The only clocks, I encounter in my day-to-day life, with wooden movements are more modern Cuckoo clocks. Thats some cool stuff you pictured there. I imagine it takes great patience to build wooden clock mechanisms.

A little;
I was a toolmaker in my trade days, so fiddly work is par for the course.
The clock is made using only very rudimentary tools as well.
I use a makita scroll saw with 0.5mm wide x 0.75mm deep saws.
The fine blades give a good finish which require only a little elbow greas to get a good surface on the teeth.
Even so, hand polishing and sanding can take hours and hours.The only other tool I use is a bench drill.
Now go back and look at the pictures and imagine hand sawing all those teeth.
For every gear you see, I have made at least two, because I have broken a blade, worn a blade so it cuts off, or simply not cut it right.
Then as you assemble the clock you have to test each gear against its mate to make sure they all run free and clean.That clock took 4 months to build.
All with just a little screaming and whimpering into my pillow at night.
My wife thinks I'm a nutcase.
And you know what, She could be right.
-
Very cool! I use a scroll saw at work for roughing replacement trim pieces. I would probably break ten+ pieces trying cuts that intricate. :ahhh
I've modified a couple of brass drive gears for antique clocks and know the patience/skill involved. Was definitely not a cost effective use of my work time to do it, but the boss and I just called it experience. Haha
You're in good company here at MT.o. There are a few nutcases here, myself included.

-
Does a mini-pocket dump count?

-
Very nice, Storm and eTrip!

A multi-national EDC dump today. :)
MultiTool - Charge TTI = U.S.A.
SAK - Explorer = Switzerland.
Watch - Vostok Paratrooper = Russia.
Knife - Kershaw 2415ST = Japan.
Lighter - Zippo guts in Italian sterling case = Italy.
Light and Loupe - Luxpro LP130 and 10x loupe = China.
Ring - Sterling = Mexico.I'll be trying to include some stuff from France(Marjacq knife), Germany(Boker Canoe) or Spain(EC dagger) tomorrow. :D


-
Thanks!

-
Today's pocket dump:
MultiTool - Gerber Suspension NXT.
Watch - Omega Seamaster Automatic Calendar.
Ring - Sterling silver.
Knife - Boker Canoe Bone scales.
Lighter - Sterling Zippo Lighter.
Light - Incandescent 2xAAA Maglite.
Loupe - 4x swivel Bausch & Lomb.
Measure - 6' Lufkin Executive.
Pen - Fisher Spacepen.
Comb - Ace with leather sheath.
-
Today's pocket dump:
MultiTool - Leatherman MiniTool.
SAK - Explorer w/ Tech scales.
Watch - Invicta Grand Diver Automatic.
Knife - Buck Bantam.
Lighter - Sterling Zippo Lighter.
Light - Coast G20 Inspection.
Loupe - 10x Chrome swivel.
Measure - 6' Lufkin Executive.
-
Tomorrow's Halloween pocket dump.
MultiTool - Leatherman Charge AL.
Watch - Invicta S1 Chronograph.
Knife - CRKT Ignitor.
Lighter - Black Zippo Lighter.
Light - Coast G20 Inspection.
Loupe - 4x B&L Swivel.
Measure - 10' Master Pocket.
Pen - Fisher Space Pen.
-
@gerleatherberman said:
Tomorrow's Halloween pocket dump.MultiTool - Leatherman Charge AL.
Watch - Invicta S1 Chronograph.
Knife - CRKT Ignitor.
Lighter - Black Zippo Lighter.
Light - Coast G20 Inspection.
Loupe - 4x B&L Swivel.
Measure - 10' Master Pocket.
Pen - Fisher Space Pen.Nice gear

How do you like the veff serrations on the CRKT knife?Sent fra min FRD-L09 via Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
