Pocket Dump picture thread.
-
A very interesting and admirable set of hobbies and side-projects, Valkie.

I love clocks and have always liked the really really antique wooden-movement clocks. The only clocks, I encounter in my day-to-day life, with wooden movements are more modern Cuckoo clocks. Thats some cool stuff you pictured there. I imagine it takes great patience to build wooden clock mechanisms.

-
@gerleatherberman said:
A very interesting and admirable set of hobbies and side-projects, Valkie.
I love clocks and have always liked the really really antique wooden-movement clocks. The only clocks, I encounter in my day-to-day life, with wooden movements are more modern Cuckoo clocks. Thats some cool stuff you pictured there. I imagine it takes great patience to build wooden clock mechanisms.

A little;
I was a toolmaker in my trade days, so fiddly work is par for the course.
The clock is made using only very rudimentary tools as well.
I use a makita scroll saw with 0.5mm wide x 0.75mm deep saws.
The fine blades give a good finish which require only a little elbow greas to get a good surface on the teeth.
Even so, hand polishing and sanding can take hours and hours.The only other tool I use is a bench drill.
Now go back and look at the pictures and imagine hand sawing all those teeth.
For every gear you see, I have made at least two, because I have broken a blade, worn a blade so it cuts off, or simply not cut it right.
Then as you assemble the clock you have to test each gear against its mate to make sure they all run free and clean.That clock took 4 months to build.
All with just a little screaming and whimpering into my pillow at night.
My wife thinks I'm a nutcase.
And you know what, She could be right.
-
Very cool! I use a scroll saw at work for roughing replacement trim pieces. I would probably break ten+ pieces trying cuts that intricate. :ahhh
I've modified a couple of brass drive gears for antique clocks and know the patience/skill involved. Was definitely not a cost effective use of my work time to do it, but the boss and I just called it experience. Haha
You're in good company here at MT.o. There are a few nutcases here, myself included.

-
Does a mini-pocket dump count?

-
Very nice, Storm and eTrip!

A multi-national EDC dump today. :)
MultiTool - Charge TTI = U.S.A.
SAK - Explorer = Switzerland.
Watch - Vostok Paratrooper = Russia.
Knife - Kershaw 2415ST = Japan.
Lighter - Zippo guts in Italian sterling case = Italy.
Light and Loupe - Luxpro LP130 and 10x loupe = China.
Ring - Sterling = Mexico.I'll be trying to include some stuff from France(Marjacq knife), Germany(Boker Canoe) or Spain(EC dagger) tomorrow. :D


-
Thanks!

-
Today's pocket dump:
MultiTool - Gerber Suspension NXT.
Watch - Omega Seamaster Automatic Calendar.
Ring - Sterling silver.
Knife - Boker Canoe Bone scales.
Lighter - Sterling Zippo Lighter.
Light - Incandescent 2xAAA Maglite.
Loupe - 4x swivel Bausch & Lomb.
Measure - 6' Lufkin Executive.
Pen - Fisher Spacepen.
Comb - Ace with leather sheath.
-
Today's pocket dump:
MultiTool - Leatherman MiniTool.
SAK - Explorer w/ Tech scales.
Watch - Invicta Grand Diver Automatic.
Knife - Buck Bantam.
Lighter - Sterling Zippo Lighter.
Light - Coast G20 Inspection.
Loupe - 10x Chrome swivel.
Measure - 6' Lufkin Executive.
-
Tomorrow's Halloween pocket dump.
MultiTool - Leatherman Charge AL.
Watch - Invicta S1 Chronograph.
Knife - CRKT Ignitor.
Lighter - Black Zippo Lighter.
Light - Coast G20 Inspection.
Loupe - 4x B&L Swivel.
Measure - 10' Master Pocket.
Pen - Fisher Space Pen.
-
@gerleatherberman said:
Tomorrow's Halloween pocket dump.MultiTool - Leatherman Charge AL.
Watch - Invicta S1 Chronograph.
Knife - CRKT Ignitor.
Lighter - Black Zippo Lighter.
Light - Coast G20 Inspection.
Loupe - 4x B&L Swivel.
Measure - 10' Master Pocket.
Pen - Fisher Space Pen.Nice gear

How do you like the veff serrations on the CRKT knife?Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
Nice gear
How do you like the veff serrations on the CRKT knife?Thank you, RF!

I like the veff blade. The serrations are easier to sharpen on a semi-circle fine-stone. And they cut rope like crazy. :)
I like the knife, but hadn't thought about it until another member posted his today. I had carried it earlier this year and liked it. The locking mechanism is different, but easy to get used to. The thumb stud unlocks the blade to fire out. Kind of cool. :) -
New EDC tryout which started yesterday! The sak on house key is a Rambler!

-
Nice gear

How do you like the veff serrations on the CRKT knife?Thank you, RF!

I like the veff blade. The serrations are easier to sharpen on a semi-circle fine-stone. And they cut rope like crazy. :)
I like the knife, but hadn't thought about it until another member posted his today. I had carried it earlier this year and liked it. The locking mechanism is different, but easy to get used to. The thumb stud unlocks the blade to fire out. Kind of cool. :)That's great, looks like a nice knife

Sent fra min FRD-L09 via Tapatalk
-
New EDC tryout which started yesterday! The sak on house key is a Rambler!
Very nice setup. Lots ofbased covered there.

Thanks, RF!

If you see an Ignitor for $20, I'd recommend getting one. It feels and functions like a $50 knife(my example does anyway). :)Thanks! Will keep that in mind

Sent fra min FRD-L09 via Tapatalk
-
My EDC
Sent from my SM-G960F using Tapatalk

-
Some very awesome gear pics guys :o

-
New EDC tryout which started yesterday! The sak on house key is a Rambler!
Very nice setup. Lots ofbased covered there.

Thanks!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

