Pocket Dump picture thread.
-
@gerleatherberman said:
I do have an issue with weak connective tissue in my tendons. I work very hard and exercise enough to keep my weight down, but I was just born with weak tendons. As of right now, my right bicep is permanently non-functional and my left Achilles tendon is ruptured 60%.Hy, GLBM, another thing we have in common :D

I have issues and problems with tendons since teen years, and have had to do exercise to strengthen and lengthen them for lots of years
Dem darn tendons still give me trouble occasionally! :P
Some edgies from my gear/carry, same SAK and Wave than yesterday, an Opinel and a box cutter too
All others are for show

-
@ThePeacent said:
Hy, GLBM, another thing we have in common :D
I have issues and problems with tendons since teen years, and have had to do exercise to strengthen and lengthen them for lots of years
Dem darn tendons still give me trouble occasionally! :P
Some edgies from my gear/carry, same SAK and Wave than yesterday, an Opinel and a box cutter too
All others are for show

I wonder if our excessively heavy EDCs are causing tendon issues?

Sorry to learn you have to deal with the tendon issues as well. A lot of folks don't know that it's easier to deal with broken bones than ruptured tendons. :ahhh
Nice group shot today, TP!
-
Got really light today. The pocket caddy is great but somewhat large. I traded it for a belt clip, awlso traded the Laggy and Executive for the Compact.
-
I'm amazed at some of the pocket dumps.
Some beautiful tools and knives.
Some interesting stuff.
I was thinking, What is the motivation for the various accoutrements?
I carry a simple tool because I've always carried one, ever since I was a scout
Keys just seem to grow, (has anyone else noticed how car keys just keep getting bigger?)
A torch, with the LED on offer these days, is invaluable.
Especially when you drop something in the car at night, sooooooo many nooks and crannies.Watches, wallets, par for the course, but I also carry a change purse.
The coins start filling pockets far too rapidly for me.A pen is usually helpful, but I use a propelling pencil, easier to use on greasy drawings in the workshop.
-
I do antiques restoration. Anything from old telephones to 8' tall wardrobes. I'm always needing MTs (two at once sometimes), bit sets/blades, lights, measuring tapes, loupes (detail work), lighter (melt filler wax and awful smoke), and watch (I am obsessive about time). On my off-days, I over-carry, because I am used to having certain gear available. I carry a very slimmed down EDC on off days and rotate the tools I carry for fun. I collect MTs and watches, so that is why I am always posting different EDC setups. I have about 30 "user MTs"(doubles of collection pieces, of which there are almost 240 collection MTs).
I am single with no kids, so I buy stuff I don't need all the time.
I hope my reasoning makes sense, Valkie.

-
@gerleatherberman said:
I do antiques restoration. Anything from old telephones to 8' tall wardrobes. I'm always needing MTs (two at once sometimes), bit sets/blades, lights, measuring tapes, loupes (detail work), lighter (melt filler wax and awful smoke), and watch (I am obsessive about time). On my off-days, I over-carry, because I am used to having certain gear available. I carry a very slimmed down EDC on off days and rotate the tools I carry for fun. I collect MTs and watches, so that is why I am always posting different EDC setups. I have about 30 "user MTs"(doubles of collection pieces, of which there are almost 240 collection MTs).
I am single with no kids, so I buy stuff I don't need all the time.
I hope my reasoning makes sense, Valkie.

Perfectly reasonable.
I build wooden clocks for a hobby.
Wood hand made gears, etc
The only metal is the shafts.But my other hobby is weapons for my daughters comiccon.
I need my MT for that to get into the fiddly bits.
Only wood, no metal at all.

-
A very interesting and admirable set of hobbies and side-projects, Valkie.

I love clocks and have always liked the really really antique wooden-movement clocks. The only clocks, I encounter in my day-to-day life, with wooden movements are more modern Cuckoo clocks. Thats some cool stuff you pictured there. I imagine it takes great patience to build wooden clock mechanisms.

-
@gerleatherberman said:
A very interesting and admirable set of hobbies and side-projects, Valkie.
I love clocks and have always liked the really really antique wooden-movement clocks. The only clocks, I encounter in my day-to-day life, with wooden movements are more modern Cuckoo clocks. Thats some cool stuff you pictured there. I imagine it takes great patience to build wooden clock mechanisms.

A little;
I was a toolmaker in my trade days, so fiddly work is par for the course.
The clock is made using only very rudimentary tools as well.
I use a makita scroll saw with 0.5mm wide x 0.75mm deep saws.
The fine blades give a good finish which require only a little elbow greas to get a good surface on the teeth.
Even so, hand polishing and sanding can take hours and hours.The only other tool I use is a bench drill.
Now go back and look at the pictures and imagine hand sawing all those teeth.
For every gear you see, I have made at least two, because I have broken a blade, worn a blade so it cuts off, or simply not cut it right.
Then as you assemble the clock you have to test each gear against its mate to make sure they all run free and clean.That clock took 4 months to build.
All with just a little screaming and whimpering into my pillow at night.
My wife thinks I'm a nutcase.
And you know what, She could be right.
-
Very cool! I use a scroll saw at work for roughing replacement trim pieces. I would probably break ten+ pieces trying cuts that intricate. :ahhh
I've modified a couple of brass drive gears for antique clocks and know the patience/skill involved. Was definitely not a cost effective use of my work time to do it, but the boss and I just called it experience. Haha
You're in good company here at MT.o. There are a few nutcases here, myself included.

-
Does a mini-pocket dump count?

-
Very nice, Storm and eTrip!

A multi-national EDC dump today. :)
MultiTool - Charge TTI = U.S.A.
SAK - Explorer = Switzerland.
Watch - Vostok Paratrooper = Russia.
Knife - Kershaw 2415ST = Japan.
Lighter - Zippo guts in Italian sterling case = Italy.
Light and Loupe - Luxpro LP130 and 10x loupe = China.
Ring - Sterling = Mexico.I'll be trying to include some stuff from France(Marjacq knife), Germany(Boker Canoe) or Spain(EC dagger) tomorrow. :D


-
Thanks!

-
Today's pocket dump:
MultiTool - Gerber Suspension NXT.
Watch - Omega Seamaster Automatic Calendar.
Ring - Sterling silver.
Knife - Boker Canoe Bone scales.
Lighter - Sterling Zippo Lighter.
Light - Incandescent 2xAAA Maglite.
Loupe - 4x swivel Bausch & Lomb.
Measure - 6' Lufkin Executive.
Pen - Fisher Spacepen.
Comb - Ace with leather sheath.
-
Today's pocket dump:
MultiTool - Leatherman MiniTool.
SAK - Explorer w/ Tech scales.
Watch - Invicta Grand Diver Automatic.
Knife - Buck Bantam.
Lighter - Sterling Zippo Lighter.
Light - Coast G20 Inspection.
Loupe - 10x Chrome swivel.
Measure - 6' Lufkin Executive.
-
Tomorrow's Halloween pocket dump.
MultiTool - Leatherman Charge AL.
Watch - Invicta S1 Chronograph.
Knife - CRKT Ignitor.
Lighter - Black Zippo Lighter.
Light - Coast G20 Inspection.
Loupe - 4x B&L Swivel.
Measure - 10' Master Pocket.
Pen - Fisher Space Pen.
-
@gerleatherberman said:
Tomorrow's Halloween pocket dump.MultiTool - Leatherman Charge AL.
Watch - Invicta S1 Chronograph.
Knife - CRKT Ignitor.
Lighter - Black Zippo Lighter.
Light - Coast G20 Inspection.
Loupe - 4x B&L Swivel.
Measure - 10' Master Pocket.
Pen - Fisher Space Pen.Nice gear

How do you like the veff serrations on the CRKT knife?Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
Nice gear
How do you like the veff serrations on the CRKT knife?Thank you, RF!

I like the veff blade. The serrations are easier to sharpen on a semi-circle fine-stone. And they cut rope like crazy. :)
I like the knife, but hadn't thought about it until another member posted his today. I had carried it earlier this year and liked it. The locking mechanism is different, but easy to get used to. The thumb stud unlocks the blade to fire out. Kind of cool. :) -
New EDC tryout which started yesterday! The sak on house key is a Rambler!

-
Nice gear

How do you like the veff serrations on the CRKT knife?Thank you, RF!

I like the veff blade. The serrations are easier to sharpen on a semi-circle fine-stone. And they cut rope like crazy. :)
I like the knife, but hadn't thought about it until another member posted his today. I had carried it earlier this year and liked it. The locking mechanism is different, but easy to get used to. The thumb stud unlocks the blade to fire out. Kind of cool. :)That's great, looks like a nice knife

Sent fra min FRD-L09 via Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
