SAK Spring Questions
-
Some spring questions please. Apologies if they seem simplistic.
- Can the corkscrew attach to any spring other than that of the knife layer? I don't like an off centre line blade and would love to move the layer to the centre line but I do like having a corkscrew.
- Can anything fit opposite the inline phillips other than the magnifier?
- Is there room for anything on the back of the phillips/magnifier s spring? (I don't have a SAK with this layer otherwise I could just look :D )
- Can anything other than the hook go on the back of the scissors spring?
I'm sure I'll think of more questions as time goes on but that's it for the moment.
Thanks!

-
If you think your questions are simplistic you should take a look at mine..
- Can the corkscrew attach to any spring other than that of the knife layer? I don't like an off centre line blade and would love to move the layer to the centre line but I do like having a corkscrew.
I have a bladeless mod with the corkscrew on the opening layer, I had to file down the spring a bit to make it work if I remember correctly
- Can anything fit opposite the inline phillips other than the magnifier?
As of what I know magnifier or light
- Is there room for anything on the back of the phillips/magnifier s spring? (I don't have a SAK with this layer otherwise I could just look :D )
Not on the explorer at least. Don't know the other models
- Can anything other than the hook go on the back of the scissors spring?
Have never tested but might work with some filing/grinding
There is a sticky with SAK's taken apart so it's easy to compare springs and tools
Hope this helps a bit until someone else comes with more info or corrections
[It's not failure if you learn something from it]
-
I have a blade less mod with the openers on the corkscrew spring.
I had to file a little nub out of the corkscrew spring to accommodate the bottle opener hook, and use an old round tang bottle opener to play nice with the spring.
The new liner with the stamped spacer for the new style thin main blade worked great.
Oh, and a little brass spacer for the can opener on the opposite side. -
@pomsbz said:
Can the corkscrew attach to any spring other than that of the knife layer? I don't like an off centre line blade and would love to move the layer to the centre line but I do like having a corkscrew.Not the answer to the question asked, but attached are pics of the top side and arse end of the Mega84 that I'm carrying this week, which has both backspring Phillips and corkscrew. While these are both on blade layers, it shows that with the cunning use of vacant backspring tool slots, a blade layer can be put where it doesn't belong, and still keep the same aft tool.


-
@pomsbz said:
Some spring questions please. Apologies if they seem simplistic.- Can the corkscrew attach to any spring other than that of the knife layer? I don't like an off centre line blade and would love to move the layer to the centre line but I do like having a corkscrew.
- Can anything fit opposite the inline phillips other than the magnifier?
- Is there room for anything on the back of the phillips/magnifier s spring? (I don't have a SAK with this layer otherwise I could just look :D )
- Can anything other than the hook go on the back of the scissors spring?
I'm sure I'll think of more questions as time goes on but that's it for the moment.
Thanks!

I haven't read past your initial post but I love this :D
-
I didn't read the first question right and I don't have any experience with moving it in to the center.. And by putting the corkscrew with the openers.. Pablo's way is the way to go. That's how he told me to do it and that's what I did
[It's not failure if you learn something from it]
-
@AimlessWanderer said:
Not the answer to the question asked, but attached are pics of the top side and arse end of the Mega84 that I'm carrying this week, which has both backspring Phillips and corkscrew. While these are both on blade layers, it shows that with the cunning use of vacant backspring tool slots, a blade layer can be put where it doesn't belong, and still keep the same aft tool.Genius! I wouldn't have thought of that.
-
@AimlessWanderer said:
Thanks
If you don't want the hook on the back of the scissors, that's one vacant tool slot to work withDeep enough?
-
Incidentally I'm not thinking of doing any filing. I can do plug and play but not much more. :D
-
@kottskrapa said:
There is a sticky with SAK's taken apart so it's easy to compare springs and toolsIt's not a sticky though it should be! :) It looks like the scissors spring can accommodate pretty much anything else on it's rear. Corkscrew, awl, etc. I'd love confirmation though.
-
So I'm thinking of a trying to make a Yeoman with a corkscrew but switching the blade to the centre using the excellent solution of allowing the corkscrew to sit in the gap where the hook would be. I've never used the combo tool, I far prefer a rear can open tool than the regular front opening version but I like the bottle opener on a SAK as a mini pry bar/scraper. Does the Combo tool work as this too? I know it's thinner but my Sharpwerks pry bar works fine and it's pretty thin also. I'd still love to replace the magnifier with something. Can't think of a use for it myself.
-
Or, put in a small blade with the big one and a bottle opener opposite the inline phillips? Forgetting the can opener that I don't like and have never used. Any one know if it's possible to put the bottle opener opposite the phillips on that layer without resorting to tricks? Or would it be better to do it using the opener spring instead of the magnifier spring? I realise I might have to file the bottle opener down slightly so it doesn't hit the phillips but that should be even within my tiny skill set. :) It would have the advantage of only requiring a single donation tool, the Explorer.
-
I'm still waiting for my explorer and pins on the slow boat from the UK (my bro in law hopefully). If anyone has any thoughts about my last question I'd be interested. :D
-
Here it is, ready for the chop.


-
@Don Pablo said:

I've worked out that I have to find a second corkscrew liner to have the corkscrew span two layers (it's actually a bit more, 2.5 layers, has to still stick out the side a bit, it's width is 8mm vs 6mm of two layers). I may have to sacrifice a 2nd hand Spartan. :) I'm also still unsure of how well the bottle opener will work in place of the magnifier or whether I have to use the opener spring and then see if the screwdriver will work in place of the can opener. I won't know till I open them I think. The second option would give me an awl at least. If anyone has any information about that question I'd love to hear from experience!
-
The first pic shows how much of the bottle opener you need to shorten to make it fit with the old-style Phillips. I believe the new style Phillips is shorter, so you don't need to cut as much!

The second pic shows how the bottle opener will sink if you try using it on the Phillips spring... :-\
The third picture shows you how much the Phillips will sink on two opener springs. Looks manageable?




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

