Leatherman Free P2/P4 Club and Feedback Thread
-
@Syncop8r said:
Great photos GLBM. Holy smurf they took ages to load on my crappy internet connection though. Do you resize them at all?Oh and

thanks, Syncop8r!
I like to offer pics that can be blown up. I forget some people don't have super fast internet connections. Sorry about that.
Good point out.

In regards to the three blades not being identically oriented in that photo, the already shortish(relative to the P4 and Wave) SE blade looked WAY to short when placed with blade/edge-to-the-right, so a desicion was made to face it the other way to make the comparison fair. I hate that photo too.
-
@gerleatherberman said:
...
You could always use two security torx bits to tighten the pivot a little, if you're worried about any tools popping open when slipping the pliers or cutting something thick. But, if LM had made the tools tighter, then they wouldn't be easily opened OH and people would be talking about how tight they are. Catch-22.
...When I read this I thought you were right, and I wanted to comment that it reminded me of people saying they wanted torx bits on the Spirit instead of rivets, so they could tighten or loosen it. Which is also a Catch-22 since the rivets as they are don't need tightening/loosening, and what do I read on the next page ...

@gerleatherberman said:
... Victorinox needs to follow suit with replaceable cutters AND stop using rivets on the SwissTools. I like screws I can tighten/loosen/service the tool with.I can only speak for myself but I have never experienced any kind of loosening on the tools of my Swisstools or Spirits, that's the beauty about their design, it's rock solid. And the whole movements of opening the pliers and the click when you close them again are all pure mechanickal (no, not you Nick
), I mean ... I do like that the Free seems to offer the same experience, but I also do think that the magnets are a bit like cheating to achieve the same feeling people have on the Swisstools.And don't get me wrong, I really like what I'm seeing (and reading) here in this topic, from the pics shown here I would say that the Free looks like the lovechild of a ST300 and a Swisstool/Spirit. I mean, some of the tools have a real Victorinox look going on, the big flat/prybar, the combo tools, the design of the phillips and even the can-opener. To be honest, I always liked how sturdy the phillips was on the Swisstool/Spirit, but I preferred the tip of the phillips on the ST300/Rebar, especially when I had to use it for a longer period, for one screw it didn't matter, but if I had to use it on 10 screws or more, I always grabbed for my ST300 or Rebar.
And you're absolutely right about Victorinox needing to upgrade their tools with replaceable cutters. I don't understand why they haven't done it already, it wouldn't take much R & D to design it, and it would only affect the production of the plierhead, and I think it would boost the sales of the Swisstools quite a bit (I know I would like to get one right away, and by one I probably mean 4 or 5 ::)).
Anyway, really liking the looks of the Free P4 and I guess I've made my choice and I'm going to get myself one (but if it fits, I will wear it in one of my black sheaths ... :P).
;)
-
Sorry about my wording, T-G!
I meant to implicate the problem with the SwissTools as the problems I have with them. My Spirit is almost too tight to use after 30 days at my work. And I'd love to be able to loosen the pivots to clean them out and reduce nail breakage. A little metal dust got in my Spirit pivots and not you can see the half moon scoring in the pivots, because I can't get them perfectly clean/loosened. I do not like rivets for those reasons.

-
@gerleatherberman said:
Sorry about my wording, T-G!I meant to implicate the problem with the SwissTools as the problems I have with them. My Spirit is almost too tight to use after 30 days at my work. And I'd love to be able to loosen the pivots to clean them out and reduce nail breakage. A little metal dust got in my Spirit pivots and not you can see the half moon scoring in the pivots, because I can't get them perfectly clean/loosened. I do not like rivets for those reasons.

No need to apologize mate, I have no problem with what you said.
I mean, we all use our tools for very different things, and since I never had the tools on my Spirit/Swisstool tighten up I assumed this didn't happen on them. And I've always been able to clean them and remove any bits by cleaning them out using nothing but hot running tap water and a small brush. But like I said, you might use them for a lot of different stuff than I do.
P.S.: Just found out that the Free P4 will get to Belgium (and to me
) a little sooner than August ... 
-
@Top-Gear-24 said:
No need to apologize mate, I have no problem with what you said.I mean, we all use our tools for very different things, and since I never had the tools on my Spirit/Swisstool tighten up I assumed this didn't happen on them. And I've always been able to clean them and remove any bits by cleaning them out using nothing but hot running tap water and a small brush. But like I said, you might use them for a lot of different stuff than I do.
P.S.: Just found out that the Free P4 will get to Belgium (and to me
) a little sooner than August ... 
thanks, man!
Glad to read they will be available soon! How many of each are you going to buy?
:D -
@gerleatherberman said:
And I'd love to be able to loosen the pivots to clean them out and reduce nail breakage. A little metal dust got in my Spirit pivots and not you can see the half moon scoring in the pivots, because I can't get them perfectly clean/loosened. I do not like rivets for those reasons.
I loved the Spirit until this happened to me also. It was a nightmare to get the tools opening and closing properly again, and they still feel a bit gritty. It was when this first happened that my true love for the Wave began.
-
@Top-Gear-24 said:
Just found out that the Free P4 will get to Belgium (and to me
) a little sooner than August ... 
Ah... the wealthy 1%

I do want to see it when we meet up!!

-
@Buzzbait said:
I loved the Spirit until this happened to me also. It was a nightmare to get the tools opening and closing properly again, and they still feel a bit gritty. It was when this first happened that my true love for the Wave began.Funny you mention that. I've developed a strong affection for the Wave and Charge. The exchangeable bit drivers sealed the deal.
And, of course as you know, we can take the Wave apart and make it function like new again.The more people mention it, the more I wish, at least, the P4 had the driver exchanger or included a slip-over adapter that works with the bit kit.

-
We definitely need a flat bit holder

-
@gerleatherberman said:
Funny you mention that. I've developed a strong affection for the Wave and Charge. The exchangeable bit drivers sealed the deal.
And, of course as you know, we can take the Wave apart and make it function like new again.The more people mention it, the more I wish, at least, the P4 had the driver exchanger or included a slip-over adapter that works with the bit kit.

I wonder how much modding it would take to make the bit kit work with it, maybe it's just a mild filing job on the philips
-
@Mechanickal said:
Ah... the wealthy 1%

I do want to see it when we meet up!!

You mean the hungry ... :P
Oh well, I've got some reserve build up so I can go a couple of weeks on old bread an water ::).
-
I'd love to be able to loosen the pivots to clean them out and reduce nail breakage. A little metal dust got in my Spirit pivots and not you can see the half moon scoring in the pivots, because I can't get them perfectly clean/loosened. I do not like rivets for those reasons... :facepalm:
I loved the Spirit until this happened to me also. It was a nightmare to get the tools opening and closing properly again, and they still feel a bit gritty. It was when this first happened that my true love for the Wave began.
Again, I'm not questioning what you guys are saying, but I must do different things with it because I can say that my first butterblade Spirit (one of the 5 I own) is my most used tool by far, mostly used during construction jobs and home decoration, and I've used about every tool in it during those tasks, and a lot of junk got in it, from sawdust and gyproc to metal shavings.
I even dropped it in a bucket with wallpaper paste (you know, when you drop your tool and there's one spot it really shouldn't fall ... ::)), and all it took was rinsing it with hot water while using a fine brush and opening/closing each of the tools a lot (and it did take a lot of rinsing after the wallpaper paste incident ...), drying it with a hairdryer and oiling it up again to get it into perfect condition again. But I've never had to open up one of my Wave's either, and my stainles New Wave (so the one before the "+") is my second most used tool, so maybe I'm not that hard on my tools after all.
Anyway, enough about the Spirit, this is a Leatherman Free topic ;).
Spoiler:
When I get a P4, I'll drop it in a bucket with wallpaper paste to compare it with the Spirit :D.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Enjoy putting your tools in the paste, T-G.

-
That's reassuring TG

Looking forward to your P4glue/paste testreview :D -
OK now!!!
I have read through the two threads discussing the NEW P4 and P2 MTs from Leatherman.Yet, I have not figured how these new gadgets can be had for FREE????
Many have said they have just received their new FREE P4 or FREE P2, but no mention of how they got it for FREE.
Am I the only one??? [emoji2957][emoji13][emoji12][emoji6][emoji6][emoji6]
Sent from my iPhone using Tapatalk
-
@LoopCutter said:
OK now!!!
I have read through the two threads discussing the NEW P4 and P2 MTs from Leatherman.Yet, I have not figured how these new gadgets can be had for FREE????
Many have said they have just received their new FREE P4 or FREE P2, but no mention of how they got it for FREE.
Am I the only one??? [emoji2957][emoji13][emoji12][emoji6][emoji6][emoji6]
Sent from my iPhone using Tapatalk
I don't know about the U.S., but over here Free apparently equals one kidney ... ::)
(don't ask me how I know that ... :-)
-
@LoopCutter said:
OK now!!!
I have read through the two threads discussing the NEW P4 and P2 MTs from Leatherman.Yet, I have not figured how these new gadgets can be had for FREE????
Many have said they have just received their new FREE P4 or FREE P2, but no mention of how they got it for FREE.
Am I the only one??? [emoji2957][emoji13][emoji12][emoji6][emoji6][emoji6]
Sent from my iPhone using Tapatalk
I just donated $119 to Tim Leatherman's company and got my Free Free P2. Then I donated $139 to Tim Leatherman's company and got my Free Pree P4. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
