Leatherman Free P2/P4 Club and Feedback Thread
-
What i taught, is moving the springs next to the scales, put a stronger magnet to avoid toold clumping and... Honestly given the situation, seems LMN did it the best way.
Altough, i believe they over complicated the solution -
As l was traveling to the US from Australia, l decided to buy the new Free P4 online from LM before l left home in order to give myself plenty of time for delivery.
A day or so after l arrived l got an email asking me to contact the Sales team. Basically they needed a room number before they would ship it to my hotel. l paid for the expedited shipping and in the end they got it to me Alabama in about 24 hours which l thought was very impressive.
Obviously l haven't given it any real use but my first impressions are that l think l'm going to like it.
Overall l rate the concept, design and quality as a 9.5 out of 10.
However overall the tool selection is not ideal for my needs and l would score it 8/10.
My main issue is the lack of a problem file. As others have suggested they should off a version wigh a full length diamond file instead of the poor serrated blade. A compromise could have been to at least have one surface diamond coated on the current file
A secondary complaint is the phillips screwdriver.
Cheers
George -
@george1 said:
As l was traveling to the US from Australia, l decided to buy the new Free P4 online from LM before l left home in order to give myself plenty of time for delivery.
A day or so after l arrived l got an email asking me to contact the Sales team. Basically they needed a room number before they would ship it to my hotel. l paid for the expedited shipping and in the end they got it to me Alabama in about 24 hours which l thought was very impressive.
Obviously l haven't given it any real use but my first impressions are that l think l'm going to like it.
Overall l rate the concept, design and quality as a 9.5 out of 10.
However overall the tool selection is not ideal for my needs and l would score it 8/10.
My main issue is the lack of a problem file. As others have suggested they should off a version wigh a full length diamond file instead of the poor serrated blade. A compromise could have been to at least have one surface diamond coated on the current file
A secondary complaint is the phillips screwdriver.
Cheers
GeorgeThank you for taking the time to share your thoughts and experience with your P4, George!

Couldn't agree more with dumping the long SE blade and getting a Wave-style file. I would go a step further and want a newly designed file with a diamond coated side and a precision cut cross-cut side like the Rebar(same kind of cut the small P file has).
I can live with the phillips driver. It works very well on most phillips screws. :)
Just want LM to make a slip-over adapter to fit their proprietary bit-kit bits. :) -
Gerleatherberman,
Totally agree about LM needing to sort out a bit adapter for the Free models.
Hopefully this will happen in the next 3 months otherwise l will need to make something up myself.
My thoughts are that the design for such a bit adapter is not complicated and that this would be a perfect 3D metal printed item. -
& 
I am considering grinding the phillips down to accommodate an adaptor. Only problem is, that if I screw it up, parts aren't available. :ahhh
But, as you said, hopefully within a few months there will be an option. :)
-
I also forgot to mention that l also enquired about purchasing the pocket clip and was told that all the P4's now ship with the pocket clip.
However there was no lanyard attachment with mine; no big deal as l don't use the the lanyard attachment but just thought l'd mention it in case someone wants one. -
I havent been around here for a while and really stopped by to see what people were saying about the Free series. I'm a bit surprised that alot of members here seem to like it? i just cant get on board with the tool selection, the metal filing attracting magnets and the locking tabs sticking out on the handle. i wear a Surge on my side 50hrs a week so i may be a bit jaded...i'm always comparing other tools to it, and they all fall short for my needs. maybe if they had one with replaceable bits and/or file/saw socket i would think differently, but if feel like the Free series are far from the best they have made like they are advertised.
-
@Walley said:
I havent been around here for a while and really stopped by to see what people were saying about the Free series. I'm a bit surprised that alot of members here seem to like it? i just cant get on board with the tool selection, the metal filing attracting magnets and the locking tabs sticking out on the handle. i wear a Surge on my side 50hrs a week so i may be a bit jaded...i'm always comparing other tools to it, and they all fall short for my needs. maybe if they had one with replaceable bits and/or file/saw socket i would think differently, but if feel like the Free series are far from the best they have made like they are advertised.Indeed. Many members mirror your feelings about the Free series. LM really did a bad job with promoting the Free P series. They went after the Wave-user market and the Free P2/P4 isn't going to replace a Wave in a work environment. I feel the market for the P series the same as high-end knives. Not all that practical, but well appreciated, for the design and quality. The tool is really awesome to use, but isn't very practical relative to the Wave in work environments.
I carried mine for several weeks and with minding where I laid the P4 down, managed to avoid a lot of metal debris and dust(I restore antiques, so steel wool and I are best friends..haha). The little bit I did get in/on the tool was easily blown off/out with compressed air or removed with packing tape.
And....The Surge is in a class of its' own. Can't really think of a tool that is more capable.

-
I have made bit adapters to fit my Wingman, Vic combo tool and straight screwdriver. They are easy and cheap to make. I am getting my P-2 tomorrow. I will check it out and see if they will work on it.

Sent from my iPhone using Tapatalk
-
Bear and Son had an adapter for their rectangle shank Phillips.
So did the Harley Davidson BuckTool.One of them might actually fit the Free Phillips, but they're impossible to find.

And they might not fit anyway.
-
When the tool came out I thought "WOW" I want it! I waited for I while also because here in Italy it was not available and still it is..... Then I started to read the first comments and aside the fidget factor, the tool is pretty standard! I mean is absolutely awesome in its class but I can make the same thing with all other multis...... It has not interchangeable bit, that flat phillips not so nice compared with that one on super tool..... So now I wait a bit (probably more than a year.) to see reasonable price, than I will take my decision. For now the winner could be the charge for sure
-

The party trick of the Free P2/P4 is fidget factor. Yes, the all OHO/no fingernail needed things are awesome, but it just doesn't punch at the Charge's level. :ahhh -
More feedback from my side.
Due to my personal objective to present LMN tool in my native language on YT i ordered a P2...aaaand a P4 came instead.
And it was real usefull to compare with my "modded" with spacers P4
OEM tool is moor loose, especially o the pliers. The oil they use is much better than what i use, so implements open a little easier, altough my zytel spacers make the opening more refined :).
The handles have play, side play, out of the box, and everything inside moves along the scales. I wished they did not...at one point in the reassembling process i taught i f***cked something.
My modded one, when opening the main tools, they do not get so close to the pliers, i believe it is the bigger surface of the spacers...or maybe i just want to believe my ideea with larger surface spacers and thcker bolts.
Except the scissor, the scissor behaves the same, altough not so close tot the pliers when resting, yet it is new, and so was the modded one.
Proof of that 0.1mm space/tolerance on the pliers needed for smooth opening and closing.
I taught it was poor manufacturing , and this lead to my pliers not closing easy.
On the packaging it says one hand opening, true, yet with some exercise and not so smooth as the Wave &co, AAAAAND with the tools touching the pliers head



-
Got my replacement P2 yesterday.
I don't know if I am just hypersensitive now, but there seems to be a lot of play between the handle and plier head while opened.
Lots of wiggle to the sides.I assume that's normal due to the interlocking pins that line when closed.
Sent from my Pixel 3a XL using Tapatalk
-
It is normal for the P series, but tightening the pliers mount screw bolts a bit gets rid of a lot of it. Though, as a consequence, it doesn't flip around quite as freely. I find it perfectly usable when tightened up a bit though. :)
-
Allright then... Got myself a P2... More suited for my needs... Yet... I have some points to stress:
On the pliers side, one side has too much space. I need to tighten it. For the price, i wished LMN did that (hear me LMN? Do you hear our feedback)
Pocket clip aint that cool after all, way to high. I'm gonna loose it, aint my style after all.
I like the slimness and the fact that one side of the scales are... Curved somehow 3D( not flat) , would have been nice to be on both sides.
Wayyy wayyy to gressive with the serrations on the blade.
Other than that... I like it more than the P4.
P4 is thicker, flatter and has a saw and a serrated blade as extra. If it had a saw and file, than P4 would have ruled them all.

-
Congrats, Raoul!

Man, that is a boneheaded mistake from the assembler team with the screw not tightened down at all.

Out of curiousity, is your P2 dated?
-
No date code.
-
Know what bothers me the most? I want the P4 but can't believe that they chose to put a lanyard ring on the heavier tool...how does that make any sense? Shouldn't the p2 have the lanyard or each of them have both?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
