Vintage SAK Owners Club
-
Maybe for the Australian market? ???

:ahhh :ahhh@jnoxyd said:
You are right, here are pics for illustration ;)

But they called lately 84mm Master Craftsman ... Explorer [emoji848]

And then in '79 the Hoff 'Explorer' grows to 91mm and numbered F11037...all crazy. I still need to find one of those.
I'm also sure the catalog info lagged the production style a bit and didn't always get updated with new photo layouts. The '79 updated styles with the stainless Hoff inlays show up first with late '75/'76 parts. Easiest parts to ID are the small scissor screw, and confirmed with the shield inlay. So I think the '77 catalog wasn't updated in time, which would be typical of most catalog photos.
-
This one is a WENGER from late 60' or early 70' , can't find it in any catalog , in should be in the 70' catalog but it is not.

-
@jnoxyd said:
So Victorinox didn't produce 84mm Master Craftsman after 1978.
BTW here are both sizes together:

I suspect main line production stopped for 84mm Master Craftsman by/before '76 based on the '76 dealer catalog showing the Fish Scaler version. '78 end date could be right for the Hoffritz versions. My guess is whenever the 84mm metal saws ran out. My latest (Hoffritz) is c. '76 production. After that any Hoffritz should have an inlay.
I still need to find a date for when the T&T was 'normally' included on the 91mm versions. Seeing yours makes me think it could be '65-'66.
-
@jnoxyd said:
It looks like 84mm Super Tinker with LNF is not so common as 84mm Climber small LNF [emoji848] What do you think?

Very nice find. This is only the third one of these I've ever seen. ColoSwiss had one with MOP scales and I have a red scaled version with bail (that I got from ColoSwiss for a SwissChamp XL). 145ka for yours, 145kaU for mine. All look to be from around the same time period (late 1960s) but with different variants could be three separate production runs. Which would make you think there were more of them out there, but no... they're one of the rarest post WWII 84mm knives.
-
@jazzbass said:
Very nice find. This is only the third one of these I've ever seen. ColoSwiss had one with MOP scales and I have a red scaled version with bail (that I got from ColoSwiss for a SwissChamp XL). 145ka for yours, 145kaU for mine. All look to be from around the same time period (late 1960s) but with different variants could be three separate production runs. Which would make you think there were more of them out there, but no... they're one of the rarest post WWII 84mm knives.Thanks jazzbass
-
@kamakiri said:
I suspect main line production stopped for 84mm Master Craftsman by/before '76 based on the '76 dealer catalog showing the Fish Scaler version. '78 end date could be right for the Hoffritz versions. My guess is whenever the 84mm metal saws ran out. My latest (Hoffritz) is c. '76 production. After that any Hoffritz should have an inlay.The newest 136kmaU (84mm Master Craftsman) I've ever seen dates to about c. 1972/73. This is from a sample size of about 50. The earliest I've seen is c. 1960 with hidden rivets and the large triangular awl. 1974 seems to be when Victorinox really made a massive change in their product lines and philosphy - revamping all of the 91mm products (2.7mm > 2.4mm blades, clip point to spear point, dropping the LNF), changing some stuff on the 93mm lines (Elsener > Victorinox), and really starting to de-emphasize the 84mm and position it as more of a kid/economy product vs. just being slightly smaller variants of the 91mm line. Post 1974 you almost never see and 4 and 5 layer 84mm knives with the exception of a couple special runs, and 3 layer 84mm are all but gone by the early 1980s.
84mm metal saws were still used in special runs through the 1980s (I have an 84mm Grand Prix small from c. 1986), and 84mm scissors were still used in a handful of small runs in the early 90s, but then they to go the way of the dodo.
@kamakiri said:
I still need to find a date for when the T&T was 'normally' included on the 91mm versions. Seeing yours makes me think it could be '65-'66.I think you're correct with c. 1966. In the period 1962-1969 there's a major change to the wood saw from a 29 tooth asymmetric style (29TA) to a 29 tooth symmetric design (29TS - the current design). Numbers suggest that this change happened c. 1966. When you look at Master Crafsman knives from this period, almost every knife with a 29TA saw = no T&T, and almost every knife with a 29TS saw = T&T.
-
@jazzbass said:
The newest 136kmaU (84mm Master Craftsman) I've ever seen dates to about c. 1972/73. This is from a sample size of about 50. The earliest I've seen is c. 1960 with hidden rivets and the large triangular awl. 1974 seems to be when Victorinox really made a massive change in their product lines and philosphy - revamping all of the 91mm products (2.7mm > 2.4mm blades, clip point to spear point, dropping the LNF), changing some stuff on the 93mm lines (Elsener > Victorinox), and really starting to de-emphasize the 84mm and position it as more of a kid/economy product vs. just being slightly smaller variants of the 91mm line. Post 1974 you almost never see and 4 and 5 layer 84mm knives with the exception of a couple special runs, and 3 layer 84mm are all but gone by the early 1980s.84mm metal saws were still used in special runs through the 1980s (I have an 84mm Grand Prix small from c. 1986), and 84mm scissors were still used in a handful of small runs in the early 90s, but then they to go the way of the dodo.
Thanks for the reply jazzbass. But I think there's pretty solid proof in two Hoffritz catalogs that the 84mm 'Master Craftsman'/Hoffritz 'Explorer' 11037 was produced outside of '74-'77. I dated my knife to c. '76 before seeing the Hoffritz catalogs posted by minichamp.
From the '77 Hoffritz catalog:

I certainly believe that your dates are correct for main line production, but Hoffritz knives are regularly or often exceptions. The main things that make me think my later copy is '76 are the 'gray' double leaf scissor spring, H/VSSR tang stamps (instead of HSS which I would expect if it was earlier and later would get H/SSR), machining of the awl, proportions of the tweezer head and shrinkage of the cellidor. It also does not side-by-side to my +PAT copy (HSS/VOS, black single leaf, symmetrical tooth wood saw, etc.)
@jazzbass said:
I think you're correct with c. 1966. In the period 1962-1969 there's a major change to the wood saw from a 29 tooth asymmetric style (29TA) to a 29 tooth symmetric design (29TS - the current design). Numbers suggest that this change happened c. 1966. When you look at Master Crafsman knives from this period, almost every knife with a 29TA saw = no T&T, and almost every knife with a 29TS saw = T&T.Then that's just a good guesstimate on my part! I certainly don't have many samples from this era. Adding them gets progressively more expensive for any of the Craftsman 136x variants!
My current focus in this era is trying to figure out when the wood saw polishing got dropped and aluminum 'bird head' spacers got dropped for good.
Thanks again for your reply. I've read your posts back into the 2015 range before I started posting here, and appreciate any of your input.
-
There are another two knives I've not seen often: 84mm "Hiker" and ""Camper" small, mod. 137kU and 237k. Who of you has such knives?

"Camper small" 237k was shown in 1940s catalogs

-
@jnoxyd said:
There are another two knives I've not seen often: 84mm "Hiker" and ""Camper" small, mod. 137kU and 237k. Who of you has such knives?I have both. The small Camper 237k was a regular catalog model and actually a pretty common model pre-1950. It shows up with some frequency until about 1970 and then... nothing. I have several including a 4 pin version from pre-1920 (in rough shape unfortunately).
The Hiker Small is an interesting one. It doesn't ever seem to be a regular catalog model, but I have seen a few that appear to be special runs from the late 1940s (crab claw can opener, etc) through the 1960s. Here's one I found NIB that was clearly a special order from the mid 1960s:

The thing I like about these models is that they are very unusual but you could get them made today if you wanted. None of the parts in these knives are out of production.
-
Thanks for the answer jazzbass. Nice to see your new picture , hope you keep them safe now [emoji6]
-
@jazzbass said:
Very nice find. This is only the third one of these I've ever seen. ColoSwiss had one with MOP scales and I have a red scaled version with bail (that I got from ColoSwiss for a SwissChamp XL). 145ka for yours, 145kaU for mine. All look to be from around the same time period (late 1960s) but with different variants could be three separate production runs. Which would make you think there were more of them out there, but no... they're one of the rarest post WWII 84mm knives.Here`s another one with original sheet, produced for General Motors, end of the 50-ies.

-
@wengercollector said:
Here`s another one with original sheet, produced for General Motors, end of the 50-ies.It's a beautiful SAK. Thanks for posting this image. I don't have this model, unfortunately, but here is a first generation Hiker small of the kind mentioned above by JAZZBASS.

-
I just posted links to several Victorinox catalog compilations in the catalogs thread. I find it intriguing how some of the recent discussion here seems to be reflected in differences that can be observed between the "Gesamt-Katalog bis 1970" and the "Gesamt-Katalog bis 1980." The attached image shows, side by side, the catalog page with the list of Victoria officer's knife models from the "Gesamt-Katalog bis 1970" (I'm guessing that the actual page is from the early 1960's) and the corresponding page from the "Gesamt-Katalog bis 1980" (I'm guessing that the actual page is from the early 1970's).
Most of the changes involve models getting manually deleted in the newer catalog. I believe that this reflects the withdrawal of these models in the early 1970's or slightly before then. One can see, in particular, the withdrawal of most 84mm models with more than two layers (with the notable exception of the three layer models with scissors), as discussed above by JAZZBASS. There are also some other subtle differences, such as the fact that model 136mU in the older catalog is replaced by model 136maU in the newer one (something that was also discussed above).

-
@MiniChamp said:
I just posted links to several Victorinox catalog compilations in the catalogs thread. I find it intriguing how some of the recent discussion here seems to be reflected in differences that can be observed between the "Gesamt-Katalog bis 1970" and the "Gesamt-Katalog bis 1980." The attached image shows, side by side, the catalog page with the list of Victoria officer's knife models from the "Gesamt-Katalog bis 1970" (I'm guessing that the actual page is from the early 1960's) and the corresponding page from the "Gesamt-Katalog bis 1980" (I'm guessing that the actual page is from the early 1970's).Most of the changes involve models getting manually deleted in the newer catalog. I believe that this reflects the withdrawal of these models in the early 1970's or slightly before then. One can see, in particular, the withdrawal of most 84mm models with more than two layers (with the notable exception of the three layer models with scissors), as discussed above by JAZZBASS. There are also some other subtle differences, such as the fact that model 136mU in the older catalog is replaced by model 136maU in the newer one (something that was also discussed above).
Excellent! Am I being thick, or might the documents be Jan '69 and comparing Jan '69 to July '71?

-
On the first/left doc, it would be nice to have the pics that correlate to: "the 12 illustrated models" and "the other 24 master-selling models"
-
@wengercollector said:
Here`s another one with original sheet, produced for General Motors, end of the 50-ies.Very, very nice example!
Could I ask for pictures of the top and ends? -
@kamakiri said:
might the documents be Jan '69 and comparing Jan '69 to July '71?
Probably not. While I don't know what the numbers are, I don't think that they designate dates (also XII isn't 7 and the right page doesn't seem to be doing by itself any kind of comparison). Moreover, the theory about 136mU being replaced by 136maU around 1966 suggests that the left page is from before 1966.
@kamakiri said:
On the first/left doc, it would be nice to have the pics that correlate to: "the 12 illustrated models" and "the other 24 master-selling models"??? A picture of "the 12 illustrated models" is precisely the content of the preceding page in each of the actual PDF Gesamt-Katalog documents. I'm not familiar with any picture of "the other 24 best-selling models."
-
@MiniChamp said:
Probably not. While I don't know what the numbers are, I don't think that they designate dates (also XII isn't 7 and the right page doesn't seem to be doing by itself any kind of comparison). Moreover, the theory about 136mU being replaced by 136maU around 1966 suggests that the left page is from before 1966.
Typing before thinking again! Even if I said 'December'...still doesn't really fit with the 136x example as discussed.@MiniChamp said:
??? A picture of "the 12 illustrated models" is precisely the content of the preceding page in each of the actual PDF Gesamt-Katalog documents. I'm not familiar with any picture of "the other 24 best-selling models."Oops, again. Counted 13 on the page and figured it was the wrong picture. And now see that the 24 aren't pictured.
-
Returning to 84mm Master Craftsman:
Three wood saw types:




Last one has Phillips without file.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login