Vintage SAK Owners Club
-
@MiniChamp said:
Probably not. While I don't know what the numbers are, I don't think that they designate dates (also XII isn't 7 and the right page doesn't seem to be doing by itself any kind of comparison). Moreover, the theory about 136mU being replaced by 136maU around 1966 suggests that the left page is from before 1966.
Typing before thinking again! Even if I said 'December'...still doesn't really fit with the 136x example as discussed.@MiniChamp said:
??? A picture of "the 12 illustrated models" is precisely the content of the preceding page in each of the actual PDF Gesamt-Katalog documents. I'm not familiar with any picture of "the other 24 best-selling models."Oops, again. Counted 13 on the page and figured it was the wrong picture. And now see that the 24 aren't pictured.
-
Returning to 84mm Master Craftsman:
Three wood saw types:




Last one has Phillips without file. -
Nice set, jnoxyd!
I'd say the first one is late '50s/early '60s. Just because it could be '60/'61 too.
I think the middle one is mid-60's at the earliest. Pretty sure after say '63-'64. Scissor spring isn't silver, saw isn't polished, and the tweezer doesn't look nickel silver in the pic. Good chance after '66 since it's a Hoffritz.
The third one could be into the early '70s. Like '70 or '71 construction. And again, possibly later because Hoffritz.I have one almost exactly like that, but with the file on the phillips.
The one I have that is c. '76 is H/VSSR and the newer 'smooth'/square phillips. In 91mm, those tang stamps are used in the '73 to early '76 range.
.......
Craftsman pre-'51 and c. '51 US. PAT. PEND.




-
And I should have asked what 'bird head' spacer is on the middle one. I suspect nickel silver and not aluminum. I'd expect aluminum on early '60s with hidden awls.
-
@wengercollector said:
Here`s another one with original sheet, produced for General Motors, end of the 50-ies.That knife is fantastic! Is this in your collection? I have some questions if so.
-
@jnoxyd said:
Returning to 84mm Master Craftsman:
Three wood saw types:

Great picture. From this era you're only missing one variation - the very hard to find 25T asymmetric polished. I have that in a Camper Small, Artisan and Huntsman Small from the early 60s (small awl). It's weird because it's almost like they went 35TAP > 25TAP > 35TAM > 25TSM*.
(T = tooth, A = asymmetric, S = symmetric, P = polished, M = machined)
-
@kamakiri said:
And I should have asked what 'bird head' spacer is on the middle one. I suspect nickel silver and not aluminum. I'd expect aluminum on early '60s with hidden awls.I've seen you asking about the pen blade spacer - what exactly would you like to know about these?
BTW - have you posted pics of your 136kmaU from 1976? Love to see those - that's the latest one of these I know of.
-
@jazzbass said:
I've seen you asking about the pen blade spacer - what exactly would you like to know about these?I'm trying to use it as a tool to date knives in the mid-'60s. Use of aluminum seems pretty consistent for indicating early 60's and nickel silver used exclusively after some date. It seems to differ enough from other mid-'60s features like saw teeth and polishing and the earlier tweezer head material change over.
@jazzbass said:
BTW - have you posted pics of your 136kmaU from 1976? Love to see those - that's the latest one of these I know of.This is what I could find quickly. I might have more in the Hoffritz threads.

Back is VSSR stamped

Top knife here, obviously:

-
@kamakiri said:
I'm trying to use it as a tool to date knives in the mid-'60s. Use of aluminum seems pretty consistent for indicating early 60's and nickel silver used exclusively after some date. It seems to differ enough from other mid-'60s features like saw teeth and polishing and the earlier tweezer head material change over.In the taxonomy I developed for my collection, I call the time period from 62-69 the "late vintage" or LVNT period. In the LVNT period there is a change from thin 1.0mm aluminum pen blade spacer to nickel silver. In general this coincided with the change from polished to machined saws and silver > black scissor springs.
Thin aluminum spacers come into being in the last part of the "mid vintage" (57-62) period. Prior to that they used a thicker 1.5mm spacer that was either aluminum or nickel silver in no way that seems to indicate preference. The thicker spacer goes away when the main/pen blade backspring is redesigned c 1960 to go from a design that was thicker at the pen blade side to one that was of uniform thickness (roughly 2.75mm).
-
@MiniChamp said:
??? I'm a little confused by this statement. Are you proposing that they actually did something else? If so, what?Is it my odd naming that is confusing? Or the chronology? AFAIK, the chronology of the 84mm wood saw goes like this:
c. 1955: 35TAP
c. 1963: 25TAP (this is the rare one)
c. 1963: 35TAM
c. 1966: 25TSMI find it interesting that they tried the 25TAP saw very briefly after about a year into the LVNT period, but then got rid of it almost immediately in favor of the older 35T saw (this time machined and not polished). I'd love to know why they didn't like the 25TAP version.
-
In the mean time a little bit of vintage alox ones: Old Cross ELINOX with bail, "the whole nine yard" instant vintage collection... :)



-
@jazzbass said:
In the taxonomy I developed for my collection, I call the time period from 62-69 the "late vintage" or LVNT period. In the LVNT period there is a change from thin 1.0mm aluminum pen blade spacer to nickel silver. In general this coincided with the change from polished to machined saws and silver > black scissor springs.I already understood that much. I'm trying to assign/estimate dates for these smaller changes, like I have done for the '70s/91mm.
I'd like to refine and reorganize this list for 91mm main line production:
c. '63 End - Nickel Silver tipped tweezers
c. '63/'64 End - Silver scissor spring
c. '63/'64 End - Aluminum 'birdhead' spacer
c. '64-'66 End - Polished Wood Saw
c. '66 End - Angled Wood Saw teethI have a tendency to use start and end dates in my chronology since they do not always coincide but overlap like clip and drop point small blades.
@jazzbass said:
Thin aluminum spacers come into being in the last part of the "mid vintage" (57-62) period. Prior to that they used a thicker 1.5mm spacer that was either aluminum or nickel silver in no way that seems to indicate preference. The thicker spacer goes away when the main/pen blade backspring is redesigned c 1960 to go from a design that was thicker at the pen blade side to one that was of uniform thickness (roughly 2.75mm).I don't have very many of my own notes from this period, but broadly understand that all. I would like to eventually work more on that period. On the list are the transition dates from nickel silver liners to aluminum - for both 91mm 'sharp' transition and 83/84mm where parts may have been more mixed as MiniChamp has suggested. Use of the thin ~0.52mm aluminum liners.
-
Let's do some serious vintage - probably the favorite knife in my collection, the 1905 Model 290:

It's quite large. Here is a comparison of the screwdriver between other models:
[pic removed for bad info - will repost later]
-
Great knife in excellent condition. Nice to see it again here.
-
Cool!!!

It's quite large. Here is a comparison of the screwdriver between other models:

I'm a bit puzzled. Ulli's table lists 1901 as the end year of the "Gesetzlich Geschützt" SD stamps. Also, as was recently discussed in Ulli's pictorial evolution thread, he thinks that Victorinox moved to three visible rivets around 1909. Are you sure about the dating estimate for the model 234k in that image?
There seem to be somewhat different opinions concerning SAK evolution in the very early 20th century. Any light you can shed here (When did they move to three visible rivets? When did they introduce the groove in the corkscrew? etc.) will be greatly appreciated.
-
@MiniChamp said:
Cool!!!

I'm a bit puzzled. Ulli's table lists 1901 as the end year of the "Gesetzlich Geschützt" SD stamps.Oh man, that’s a brain fade mistake on my part that I forgot about. I originally took that pic with a 3 rivet Tourist but didn’t like the way the lighting came out. When I retook the picture I used a new-to-me 1890s Tourist and forgot to change the text overlay. :-[
Going to delete that one and repost with the correct info. Thanks for catching that!
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
I very well remember the fascinating thread when JB first found this model
Thanks