ZapWizard's Leatherman Free P4 Mods
-
about the bits
also that is some great results in the testing as well

-
Excellent testing looks like it can handle some torque

-
@Dutch_Tooler said:
Could I perhaps ask you to consider adding the LM 2D bit slot all the same? Or maybe an alternate model that has this instead of the transversal 4mm hex?It would need to be an alternate model. I tried a few things today in CAD, but it works out to be too thin in critical places if I try to mix both together. I also realized I don't need a mixed horizontal opening, as the 1/4" wrench works well on the flat bits.
I did update the magnet stop to be smaller, this is live on the shop now. I have another batch of things to order, so I will get a new build, this time in a different finish. (The 24K gold plating is pretty, but it flakes off too easy for a tool)
-
@ZapWizard said:
It would need to be an alternate model. I tried a few things today in CAD, but it works out to be too thin in critical places if I try to mix both together. I also realized I don't need a mixed horizontal opening, as the 1/4" wrench works well on the flat bits.I did update the magnet stop to be smaller, this is live on the shop now. I have another batch of things to order, so I will get a new build, this time in a different finish. (The 24K gold plating is pretty, but it flakes off too easy for a tool)
If that's the case, then so much the better. Looking forward to v1.0

-
Truly incredible work. For this item alone I am considering buying the P4. Personally I would replace the mediocre tools rather than the awesome flat driver and Philips. Other than that though I would LOVE the heck out of that thing. I use 4mm bits all the time.
Cheers,
H.G. -
I should receive my bronze Rev 2 model in the mail in the next few days. I will post images for those interested in that finish. If I didn't already mention it, the gold plating flakes off in areas of contact.

Just dropping this here for anyone interested: A person on Reddit asked if they could re-arrange the stack up to ditch the Philips, ruler and can opener. But keep the package opener. Yes it is possible, and doesn't require any extra parts. Just double stack on of the existing washers. You can alternatively keep the Philips instead.

And here is a dimension ed image showing the stack up for anyone who wants to swap stuff around. As long as your left/right stacks add up to 0.52 inches you can do whatever you want.
-
@ZapWizard said:
I should receive my bronze Rev 2 model in the mail in the next few days. I will post images for those interested in that finish. If I didn't already mention it, the gold plating flakes off in areas of contact.
Just dropping this here for anyone interested: A person on Reddit asked if they could re-arrange the stack up to ditch the Philips, ruler and can opener. But keep the package opener. Yes it is possible, and doesn't require any extra parts. Just double stack on of the existing washers. You can alternatively keep the Philips instead.

And here is a dimension ed image showing the stack up for anyone who wants to swap stuff around. As long as your left/right stacks add up to 0.52 inches you can do whatever you want.
Man, I wish you were in Philly. So many ideas to explore with your skill set, amazing job. This looks awesome! I also think that tool arrangement makes a ton of sense. It would be a shame to lose an awl, file, or the prybar/box cutter.
-
Amazing job ZW!

Hey LM, see what you can do with the p series
That’s what we want, darn it 
Now even I consider buying a P4...once the price drops :D
-


The bronze steel part arrived. This is Rev 2 (And the version anyone who ordered is getting). This one requires less reaming out, and no hammering like you see in the video. The magnets also has a closer to the bit for a better hold on the bit.
-
Looks excellent
Great work Zap

-
Just an FYI for folks who purchased the bit holder:
The magnets are now looser inside, so they can fall back towards the hinge, and stick there. Making the bit holding power weaker.
I had to take mine apart and apply some super-glue and push the magnets back to their position behind the bit. -
@ZapWizard said:
Just an FYI for folks who purchased the bit holder:
The magnets are now looser inside, so they can fall back towards the hinge, and stick there. Making the bit holding power weaker.
I had to take mine apart and apply some super-glue and push the magnets back to their position behind the bit.Doesn't seem like major issue but good info.
Sent from my ONEPLUS A6013 using Tapatalk
-
@Happy Gilmore said:
Doesn't seem like major issue but good info.Sent from my ONEPLUS A6013 using Tapatalk

-
Got my thumb tabs and holster. Very nice. I got the small holster and it works good, but it's pretty snug on my belt. I was paying more attention to the belt width more than the thickness. Very usable, but might buy another one with a clip. I'll probably get an Extra large and fix a top mount clip. I'll use my current one with one of my thinner gun belts. Also, the thumb tabs work very well. The straight blade has always been a little difficult to deploy, but now it's a breeze. Very well done!!

-
Love it, any chance of a horizontal holster version? I can't stand how the perpendicular holsters dig in when I sit down. This is one of the biggest reasons I don't holster carry a MT.
Sent from my ONEPLUS A6013 using Tapatalk
-
@Slygrin said:
Got my thumb taps and holster. Very nice. I got the small holster and it works good, but it's pretty snug on my belt.Hey! That looks great. Belt sizes are a very tricky things. I had to just settle on a few military/government standards and hope from there.
@Happy Gilmore said:
Love it, any chance of a horizontal holster version?So this has been requested a few times on both the FREE and other holsters. So far I have just told people to purchase the TekLok version which allows for 45 degree and horizontal carry. (But with the added bulk of the TekLok clip).
It's not as straightforward as just hanging like normal. It is much harder to design a 90 degree carry unless it is very specific to your belt size. Making to too wide can make it so the tool tugs on your sideways, as the center of gravity isn't below your belt.
I could try designing a lower profile 90 degree carry. Something that doesn't hang down three inches, but perhaps down enough to keep the center of gravity below the middle of the belt.
And finally the other thing I can think of is that the tool is straight, you belt would have a small amount of curve. So any 90 degree carry would have to try to allow for that. -
Added bonus with the thumb tabs. I can easily deploy the straight blade and saw with my Left hand.
-
@ZapWizard said:
Hey! That looks great. Belt sizes are a very tricky things. I had to just settle on a few military/government standards and hope from there.So this has been requested a few times on both the FREE and other holsters. So far I have just told people to purchase the TekLok version which allows for 45 degree and horizontal carry. (But with the added bulk of the TekLok clip).
It's not as straightforward as just hanging like normal. It is much harder to design a 90 degree carry unless it is very specific to your belt size. Making to too wide can make it so the tool tugs on your sideways, as the center of gravity isn't below your belt.
I could try designing a lower profile 90 degree carry. Something that doesn't hang down three inches, but perhaps down enough to keep the center of gravity below the middle of the belt.
And finally the other thing I can think of is that the tool is straight, you belt would have a small amount of curve. So any 90 degree carry would have to try to allow for that.Awl good points. I'd say probably not worth time spent for a niche market. Been using the Readyman belt Sleave and am a little spoiled from how flush MTs sit in it.
Cheers,
HG -
My bit holder has been shipped! I have some 4mm bits coming too. I'm just wondering if anyone has any good ideas for carrying the bits? I have a small zipper case that I was planning on using, but curious what other options folks are using.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login