ZapWizard's Leatherman Free P4 Mods
-


Today I received the production bit holder, and it is beautiful.
Other than having to ream out the holes a tiny bit, it is perfectly ready to install. (See video) All the bit openings are just right, and the locking action is solid.
I have to think about if I will even add the flat bit driver opening since most people won't have them anyways. I am a bit superstitious about changing a model once something works.
The magnets are strong enough to hold the bit and it won't come out when flicking the holder out, but it isn't as strong as some screwdrivers. If you want it stronger, you can try drilling the 1mm separation to be thinner.
Please help me spread the word on placed like /r/Leatherman, we can show them the product can be improved. -
I got to say it looks amazing. I mostly try to keep a tool as original as possible but this really makes me think twice.
You definitely should have worked for Leatherman during the design process. It looks better/works better/gives more options then the setup they used. We'll done zapwizard!Sent from my ONEPLUS A3003 using Tapatalk
-
That is so very awesome, Zap
You have really done some great work with adding the bit holder
the sheath and it's different clip placements are also great 
-
Excellent work

-
I may need to make one change: The magnets have a 1mm gap of metal that separates them from the bit. Most magnetic screw drivers just let the magnet and bit come into 100% contact, this is why so many of them end up with broken magnets. However due to the inverse square law, the magnetic pull isn't as strong as I want. So I will change the solid 1mm of metal, to a small taper that tries to stop the magnets a bit closer to the tool surface. The danger is if someone needs reams out the hole they might tear though the tapered section and then the magnets can fall out. (Glue is the solution here). I got to think about if it is worth it.
-
What wonderful design and executed very well too! Looking forward to the final product!

-
I ran a few tests to ensure this is up to the task:

The bottle opener works.

The 4mm bit driver handles plenty of torque. The tool body started to bend when I reached 14 in-lbs (1.6 Nm)

The 1/4" wrench handled more than 30 in-lbs (3.4 Nm).
-
This is awesone work Zap

Could I perhaps ask you to consider adding the LM 2D bit slot all the same? Or maybe an alternate model that has this instead of the transversal 4mm hex? I for one have the LM bits, and they make for a reasonably compact carry in the bit card. I'm sure I'm not the only potential buyer that could benefit.
-
about the bits
also that is some great results in the testing as well

-
Excellent testing looks like it can handle some torque

-
@Dutch_Tooler said:
Could I perhaps ask you to consider adding the LM 2D bit slot all the same? Or maybe an alternate model that has this instead of the transversal 4mm hex?It would need to be an alternate model. I tried a few things today in CAD, but it works out to be too thin in critical places if I try to mix both together. I also realized I don't need a mixed horizontal opening, as the 1/4" wrench works well on the flat bits.
I did update the magnet stop to be smaller, this is live on the shop now. I have another batch of things to order, so I will get a new build, this time in a different finish. (The 24K gold plating is pretty, but it flakes off too easy for a tool)
-
@ZapWizard said:
It would need to be an alternate model. I tried a few things today in CAD, but it works out to be too thin in critical places if I try to mix both together. I also realized I don't need a mixed horizontal opening, as the 1/4" wrench works well on the flat bits.I did update the magnet stop to be smaller, this is live on the shop now. I have another batch of things to order, so I will get a new build, this time in a different finish. (The 24K gold plating is pretty, but it flakes off too easy for a tool)
If that's the case, then so much the better. Looking forward to v1.0

-
Truly incredible work. For this item alone I am considering buying the P4. Personally I would replace the mediocre tools rather than the awesome flat driver and Philips. Other than that though I would LOVE the heck out of that thing. I use 4mm bits all the time.
Cheers,
H.G. -
I should receive my bronze Rev 2 model in the mail in the next few days. I will post images for those interested in that finish. If I didn't already mention it, the gold plating flakes off in areas of contact.

Just dropping this here for anyone interested: A person on Reddit asked if they could re-arrange the stack up to ditch the Philips, ruler and can opener. But keep the package opener. Yes it is possible, and doesn't require any extra parts. Just double stack on of the existing washers. You can alternatively keep the Philips instead.

And here is a dimension ed image showing the stack up for anyone who wants to swap stuff around. As long as your left/right stacks add up to 0.52 inches you can do whatever you want.
-
@ZapWizard said:
I should receive my bronze Rev 2 model in the mail in the next few days. I will post images for those interested in that finish. If I didn't already mention it, the gold plating flakes off in areas of contact.
Just dropping this here for anyone interested: A person on Reddit asked if they could re-arrange the stack up to ditch the Philips, ruler and can opener. But keep the package opener. Yes it is possible, and doesn't require any extra parts. Just double stack on of the existing washers. You can alternatively keep the Philips instead.

And here is a dimension ed image showing the stack up for anyone who wants to swap stuff around. As long as your left/right stacks add up to 0.52 inches you can do whatever you want.
Man, I wish you were in Philly. So many ideas to explore with your skill set, amazing job. This looks awesome! I also think that tool arrangement makes a ton of sense. It would be a shame to lose an awl, file, or the prybar/box cutter.
-
Amazing job ZW!

Hey LM, see what you can do with the p series
That’s what we want, darn it 
Now even I consider buying a P4...once the price drops :D
-


The bronze steel part arrived. This is Rev 2 (And the version anyone who ordered is getting). This one requires less reaming out, and no hammering like you see in the video. The magnets also has a closer to the bit for a better hold on the bit.
-
Looks excellent
Great work Zap

-
Just an FYI for folks who purchased the bit holder:
The magnets are now looser inside, so they can fall back towards the hinge, and stick there. Making the bit holding power weaker.
I had to take mine apart and apply some super-glue and push the magnets back to their position behind the bit. -
@ZapWizard said:
Just an FYI for folks who purchased the bit holder:
The magnets are now looser inside, so they can fall back towards the hinge, and stick there. Making the bit holding power weaker.
I had to take mine apart and apply some super-glue and push the magnets back to their position behind the bit.Doesn't seem like major issue but good info.
Sent from my ONEPLUS A6013 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login