ZapWizard's Leatherman Free P4 Mods
-
Hey Zapwizard. Your work is amazing here.
A little suggestion since you are going ahead with the 4mm bits. Perhaps you could consider 3D printing a stack/sleeve/storage similar to the LM 2D bit holders to hold a row of 4mm bits? I think it's pretty sweet. -
Hey Zap, love the work here. I would be interested in a straight Leatherman bit driver (as someone who has invested in the set, not in 4mm bits) without the bottle opener, as every damn thing in the EDC world has one at this point. I'm thinking just a solid version of your first design. If you could make one, it would be the last thing to finally convince me to buy a P-series tool.
-
@Sam Lim said:
Hey Zapwizard. Your work is amazing here.
A little suggestion since you are going ahead with the 4mm bits. Perhaps you could consider 3D printing a stack/sleeve/storage similar to the LM 2D bit holders to hold a row of 4mm bits? I think it's pretty sweet.Hell yes! I would love to not carry 4mm bits in an Altoids tin
Btw I love how the driver and the blade
tabs are similar in color. -
@eymantia said:
Hey Zap, love the work here. I would be interested in a straight Leatherman bit driver (as someone who has invested in the set, not in 4mm bits) without the bottle opener, as every damn thing in the EDC world has one at this point. I'm thinking just a solid version of your first design. If you could make one, it would be the last thing to finally convince me to buy a P-series tool.He decided against it for good reason. By using 4mm bits he eliminates liability issues. The bottle opener is a "free" tool. Also the bottle opener can be used to grab standard 1/4 inch hex bits. Really clever function of it imo. Check the third page to see how the opener can hold standard hex bits.
-
@Happy Gilmore said:
He decided against it for good reason. By using 4mm bits he eliminates liability issues. The bottle opener is a "free" tool. Also the bottle opener can be used to grab standard 1/4 inch hex bits. Really clever function of it imo. Check the third page to see how the opener can hold standard hex bits.I’m aware of the function of the bottle opener, but it wasn’t exactly a “free tool.” IIRC it interferes with the ability to hold the bits properly.
Sent from my iPhone using Tapatalk
-
I have had at least a dozen requests for a Leatherman flat bit version. I think I can go ahead and make it now that I know the shrinkage amount and got the locking portion to work correctly. But alas I will be offline for most of this month, so it will have to wait until later.
-
@Happy Gilmore said:
He decided against it for good reason. By using 4mm bits he eliminates liability issues. The bottle opener is a "free" tool. Also the bottle opener can be used to grab standard 1/4 inch hex bits. Really clever function of it imo. Check the third page to see how the opener can hold standard hex bits.@ZapWizard said:
I have had at least a dozen requests for a Leatherman flat bit version. I think I can go ahead and make it now that I know the shrinkage amount and got the locking portion to work correctly. But alas I will be offline for most of this month, so it will have to wait until later.
See, better to let the man answer himself ;)
-
@ZapWizard said:
I have had at least a dozen requests for a Leatherman flat bit version. I think I can go ahead and make it now that I know the shrinkage amount and got the locking portion to work correctly. But alas I will be offline for most of this month, so it will have to wait until later.

-
Zap! Totally fantastic! Put me in for the LM flat version too!
-
Hmm, I think the flat version is going to need a stronger magnet and a barrier between the magnet and bits. Otherwise magnet is likely to crack. Zap probably already knows this I'm betting
-
I do like the magnet idea for the bit-driver. Leatherman uses only 2 types of bit holders a hinged version for the Skeletool and the regular one used on the other multitools. Neither one of those use a magnet.
-
Zap, do you think there is a way to make a t shank exchanger in the scissor slot? That would sell me on the P2 with both your add-ons right now.
-
I’d be in for the Leatherman version.
Sent from my iPhone using Tapatalk
-
Awesome work Zap!

Already ordered a holster for my Charge TTi (open clip version). Can not wait anymore

Thank you for your outstanding engineering performance
.Greetings from Austria
-
@Happy Gilmore said:
Zap, do you think there is a way to make a t shank exchanger in the scissor slot? That would sell me on the P2 with both your add-ons right now.I don't think I could do that with 3D printing, it would require both milling and sheet metal parts.
@Sidewinder said:
Already ordered a holster for my Charge TTi (open clip version). Can not wait anymore
Thank you for your outstanding engineering performance
.Thanks.
I am going to be working on the Leatherman Flat bit soon. I am getting lots of requests for it from YouTube and email.
-
@ZapWizard said:
I don't think I could do that with 3D printing, it would require both milling and sheet metal parts.
Thanks.I am going to be working on the Leatherman Flat bit soon. I am getting lots of requests for it from YouTube and email.
thats great news!

-

Howdy folks. I have been working on other projects, as well as getting my eyes lasered. I recently got back to working on my tool designs.
Due to popular demand: I ordered a Leatherman FREE P2. I have to say, I don't think the P2 is a good option compared to the P4, only because it isn't that much thinner or lighter. Holding them side by side, you will see the P2 actually had the front scales tilted towards the middle, making it thicker than it appears. It is only a few millimeters thinner than the P4. Both are expensive, so I understand perhaps saving a few bucks to get the P2.
However, folks will still get the P2 and need a holster for it. My design is now complete, and just need to order the prototype in the next week or so. It is very similar to the FREE P4 holster. The only real difference is that you can't put it in four different ways, just two. The tilted front scales prevent flipping it around.


I also finally came up with design I like for the Leatherman Flat Bit Holder. The design ditched the magnets, as they just don't work well with the Leatherman double sided bits. Instead I have two arms that will grip the small detents on the side of the bits.
To ensure it can handle lots of torque, the sides wrap around the front to keep this as stiff as possible. Another awesome thing you can do with 3D printing that is impossible using other production methods. It does mean that it will have issues with recessed screws, but that is what the Leatherman Bit Extender is for.


As with the prototype, it folds into the tool with the bit at an angle, but deploys straight.
It will also have a 1/4" horizontal opening, but no bottle opener.I would love your folks feedback while I work on a few other designs. Also coming soon: FREE series holsters with 4mm and Flat bit holders on the back side. The SuperTool 300 holster design.
-

Just one smaller concern, it seems that there is not a lot that holds the back end of the inserted bit in place against torque and bending apart from the inner side walls (only restrictive sideways, not up/down), so all that holds the bit in particular against torque and up/down bending is the front, curved part of the bit holder. I realise this is probably due in part to the design of the springs, but perhaps one could still add some faces inside that hold the LM-profiled (if that makes sense) part of the back end of the bits? For this, you might need to decrease the spacing between the spring arms and the adjacent fixed faces, but it would be worth it. Or alternatively execute each spring as a bifurcated loop surrounding a central, comparatively rigid hollow holding profile, where the apex of the loop engages the bit's indent (hope this is clear
).Edited for clarification (hopefully)
-
I think your talking about torque twisting the bit along the same axis as the bit-grips. (Clockwise/Counter-clockwise relative to the cut-away image)
Right now any torque in that direction would push up against the inside surface of the spring, since it would hit the middle of the spring, there would be lots more force here, and the springs wouldn't move much.The spring arms need to be as long as possible simply due to the fact that the material is quite stiff, as well as to discourage cracking over time. Springs like this are always a bit tricky, I have to prototype the part in the actual material, and then test the feel to ensure they aren't too tight or too loose. With the goal of holding the bit, but allowing it to be removed by just your fingers.
After looking at the cutaway, with non-1am eyes, I realized that since I removed the magnets I have more space behind the bit. I can actually move the entire bit backwards a bit, this would allow the front flat-hex opening to become deeper.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
HG