Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays
-
So I went on vacation and when I got back found myself back to my habit of just lurking around like I did before the start of 2019...but I found I really wanted to get a bit more info out on my studies. Originally, I thought it would be a big single thread, but I suppose that's not practical for me right now. I thought this would be a good way for me to kick off the project with a relatively simple start.
I chose the Grand Prix inlay for this first part since they're fairly common and relatively inexpensive. I've identified at least 4 variants from the '70s.
c.'72/73 V1n:

I believe this is the first Grand Prix inlay in Nickel Silver, immediately following the St. Christopher previously used on previous Automobile related models.
c. '75 V1s:

Like many other inlays in this period the switch to Stainless Steel with the same tooling used for Nickel Silver proved to wear the tooling quickly. Note that both 'V1' types have the same details and most definitively in spoke count. Easiest to see the 12 spoke rear wheel. A c.'76 copy is the same, but with severe enough wear that the cellidor merges in front of the spokes. The c.'75 copy has a black scissor spring and requisite '75 details.
c. '77 V2s:

Wear on previous tooling led to this V2 revision and refresh. Details are very different from V1 variants and easiest to spot is the simplified 10 spoke rear wheel. (Model T's have 12) The knife is clearly c. '77 with the 1mm 'full' center spacer, aluminum tweezer tip, and larger scissor screw, etc.
c. '79 V2n:

I think the c. '77 tooling must have started to wear by '78 and like some inlays were switched back to Nickel Silver (like Fish and some Vic shields) while some went to Hot Stamp like the Camper.
Late '80s:

I don't have a c. '80 copy or pictures of one, but I think that's the time that the design was again simplified for longevity with 100% stainless inlay use. The easiest detail to spot is the lack of button dots in the seats. I have not studied post '80 variants for any differences.
Thanks for looking!
-
Very interesting. Thank you very much, kamakiri!
Unfortunately, I have only one late version of this SAK:

-
nice going as always! 
-
Excellent summary and thanks for posting this, Kamakiri. It will prove a good resource of information for the future, no doubt.
Your post prompted me to get my own out and have a look. Using your nomenclature, I think I have a version 1 s on my hands, circa 1975.
Here are its features:
- The automobile inlay itself appears to be stainless, not nickel silver.
- Large blade: tang stamp is small-v VSSR, and it has NO tang stamps on the obverse side.
- Small blade: spear point.
- Scissors: screw joint with black two-sided spring
- Can opener: no +PAT marking
- Cap lifter: no ground edge, no 90-deg half-stop
- Phillips: squared shank with can key opener
- Awl: no sewing eye
- Tweezer: aluminum headed.


-
No tang stamp on the obverse side - wow that’s interesting.

Great looking knife!
-
Looks like I have a late 80s version.
I always thought it looked like one from the late 70s until you pointed these inlay differences. Nice thread kamakiri!


-
@FolderBeholder said:
Looks like I have a late 80s version.
I always thought it looked like one from the late 70s until you pointed these inlay differences. Nice thread kamakiri!

Nice SAK and pic FB!

-
Great you're doing this Grant, really looking forward to the following parts

-
Thanks <u>everyone</u> for the interest and participation!

This is the another 'V1s' c. '76 showing more degradation of the die/tooling:

And the blank rear tang is definitely indicative of c.'73 to '75 when paired with a black scissor spring.


I'll certainly cover the topic of blank rear tangs again/more when I circle back for Camping inlay updates in this series.
-
@kamakiri said:
Thanks <u>everyone</u> for the interest and participation!

This is the another 'V1s' c. '76 showing more degradation of the die/tooling:

And the blank rear tang is definitely indicative of c.'73 to '75 when paired with a black scissor spring.


I'll certainly cover the topic of blank rear tangs again/more when I circle back for Camping inlay updates in this series.

-
Great thread... love this model.
It isn’t the inlay, but just seen the car today
It’s 1923 and runs smoothly

-
Great read - I hadn’t realised there were such subtle differences!

-
I could be wrong, but I always thought the Grand Prix inlay was a Packard. Like this 1910 Tourer.
Does anyone know for sure?

(not my picture) -
@Myron said:
I could be wrong, but I always thought the Grand Prix inlay was a Packard. Like this 1910 Tourer.Does anyone know for sure?

(not my picture)It's a Model T fer shure.

Pic from Model T wiki.Height of the lights, windshield support rods, position of the steering wheel and shape of the rear fender are good clues.
....
Didn't think this would evolve into a discussion on actual cars, but I'm glad the thread has some interest! :)
Thanks all for the compliments and participation!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


