Things are getting a bit quiet around here....
-
Gino88, though not a charter member, had a great idea I think worth considering:
/post/2066707
A 75-80 USD donation spreads into small monthly subscription fee, mean while, member gets 35-40usd worth of SAK or LM tool with exclusive color or special edition. It's a win-win for everyone.
-
@comis said:
Gino88, though not a charter member, had a great idea I think worth considering:/post/2066707
A 75-80 USD donation spreads into small monthly subscription fee, mean while, member gets 35-40usd worth of SAK or LM tool with exclusive color or special edition. It's a win-win for everyone.
If we had the up front cash to commission a run like that and then sit on it for whatever length of time we had to, it might be worthwhile.
Unfortunately at this time, we don't.
I had an idea the other day that I think we could all get on board with. What is the #1 problem with EDC stuff?
Someplace to carry everything.
Sure, you could get a Skinth or a Maxpedition bag or something, but what about a truly compact and customizeable EDC carry method?
I'm thinking we build a small box, similar to an Altoids tin, but with different features like:
- Waterproofing
- Interchangeable mounting option for belt clip, MOLLE, carabiner etc
- Removable bit holder so you don't have to carry a bit set with your multitool
- Internal removable dividers for organizing smaller items like FAK things or batteries for flashlights
I'm thinking it would be relatively easy to design a small box with a removable lid, have a recess in the lid for an O Ring to seal it and then use a silicone wrist band (or similar) to hold it shut.
It would be easy to prototype a few of them, send them around to get feedback and go from there.
Thoughts? I have others if this one doesn't turn anyone's crank. :D
Def
-
I like the box idea.
When I kayaked more regularly, often solo, I thought it would be a good idea to pick up a way to carry, protect, and preserve a cell phone. Back then I used a small flip-phone and this little box fit the bill (IIRC):

It is fairly small, but indestructible. The lid crushed the rubber liner down to make it waterproof. There is even a small pressure valve to accommodate a decrease in atmospheric pressure. Downsides are that it does not hold much for it's size and is also a bit heavy.

I think I ended up just chucking the phone in a roll-top dry bag.

Still the box idea is compelling because it offers more protection than a soft-sided solution.
-
Pelican or Otter Box is exactly where my mind went, too. Back when our phones weren't also our cameras, I carried my camera in one of these on paddle trips.
Personally, an MTO-branded thingie like this isn't inspiring to me, but if it supports the forum and Grant's amazing efforts at keeping this community going, I'd get one.
Myron
-
The downside of my 1010 is that it is too small now.
But.....bigger means bulkier and heavier. I have another gear box around here some where.....I'll try to dig it up and discuss pros & cons at some point.
-
I was looking for a project we could all get a hand in- if the box idea isn't popular (and it sure looks like it isn't, judging by the landslide of responses! :D) then I am willing to keep looking.
I do have a couple of other projects in the works, and one of which I may ask for some help with eventually, but in the meantime, here are a few other concepts I have been bouncing around in my head for a while. See if anything here stirs any interest, and, if not, hopefully we can come up with some other ideas!
-
Pocket chainsaw- basically this would be a small chainsaw the same size as a small fixed blade knife. Figure 4-6" blade, battery and switch in the handle, powered by a drone motor.
-
Different Tread links- I floated this idea before and even did some basic design work.
Retractable Handcuff Key:

TreadLight:

-
EDC Holding wristband- many times I have been trying to fix something, which involved holding something with one hand while trying to grab a tool with the other. With this wristband idea, you'd have a 4 inch (or so) wristband with MOLLE straps on it so you could clip a tool, SAK, flashlight etc to it and always have your tools handy when you need them. You could also stick the flashlight to it, with it pointed towards whatever you are working on to have hands free light.
-
iEDC- basically a set of dice that would connect to a keychain. You could use them for gaming, passing the time or have the faces engraved with something like Leatherman, Gerber, Wenger, CRKT, SOG and Victorinox to help you decide what tool/knife etc to carry that day. and iEDC is an anagram of DiCE, so the marketing is already done! :D
-
Another repeat, the Multitool.org Pot Holder
Def
-
-
Okay, apparently those are some pretty bad ideas....

Def
-
@Grant Lamontagne said:
Okay, apparently those are some pretty bad ideas....
Def
Sorry for the super late reply.
The case idea is nifty, and I have a few 1010 and 1015 over the years. I think they are great if you have very delicate electronics that need to keep dry when I close to water, but day-to-day they are a bit too heavy duty for casual use.
-
I think that'd be great, just not sure whether cell phone sized battery has enough power to make the chainsaw powerful enough to cut anything.
https://www.youtube.com/watch?v=GyKOfFMWuFY
This one from Bosch looks decent, but with a much bigger battery, it still take a short while to cut thru a limb sized wood. -
Tread link, my 2 cents is the 'platform' is really niche, I have almost never seen people wearing one in real life, except on youtube.
-
Interesting, I think a wrist band carry method has great potential for people working in confined space or specialized use(caving, SAR, etc).
-
I am with Pacu, this is pretty cool and if you thread a hole thru the dice, it could even make it into some kind of Begleri or monkey fist.
-
I know many thru hikers have silicon made mini pot holder with them(shape like a kitchen mitten, but good for only 3 fingers), and I have seen many iterations of aluminium pot holders already existed over the years.
-
-
These are just ideas.... feel free to add your own!

Def
-
How about SAK scales with the Swiss Army Knight logo and writing? Would that be doable with 3D printing?
-
@SirVicaLot said:
How about SAK scales with the Swiss Army Knight logo and writing? Would that be doable with 3D printing?As a fellow SAK knight, I think that's a good idea and great direction.
-
I think we should do something for the LM and Gerber fans too, but those are harder to customize

-
@SirVicaLot said:
How about SAK scales with the Swiss Army Knight logo and writing? Would that be doable with 3D printing?I like that to

-
@SirVicaLot said:
How about SAK scales with the Swiss Army Knight logo and writing? Would that be doable with 3D printing?That's easy enough to do- I have always thought we should bring back the Knife of the Year program. Hard to believe we haven't done that in ten years! :ahhh
There are a few ways we can do it- the first being getting the logo lasered or printed on existing knives from the factory, which is the easiest, cheapest and most expedient.
The second would be custom scales that would go on existing knives, which is a bit more difficult and expensive- do we provide just the scales so members can put them on their own knives or do we provide the knife too? If it's the first, then is it the Knife of the Year or just the Scales of the year? If it's the latter, then we have to source knives and swap scales, which is doable since I am an authorized Victorinox Dealer, but if they ever find out that is what we are doing, that will end.
Then there's the possibility of going with a completely custom knife from someone like Syph007, but that is going to be bigger $$ than I think most people will want to spend. I'd say we are looking at a couple of hundred dollars each for that option. :ahhh
Def
-
I would like option three, but I cannot justify to spend so much money on a SAK. For a lot of people this would be too much money,
so I think we would not get a lot of people on board.I like the laser etching because it is more durable than the printing method, right? But correct me if i am wrong.
Scales only also sounds better to me than complete knives. It is easier and cheaper to ship. Second, there are no restrictions on shipping scales to the UK for example and third, people can put them on their favorite SAK, so we might see them pictured more often.
-
Knife/Tool of the year sounds like fun.
Did the MTo PX project break-even?
-
@Nix said:
Knife/Tool of the year sounds like fun.Did the MTo PX project break-even?
Nope.
In an effort to get the best possible price for members I overreached a bit, then didn't factor in the extra import taxes... and then shipping cost about $5 more per package than expected. Dear old Uncle Def went in the hole pretty good on that one.

Def
-
@SirVicaLot said:
I would like option three, but I cannot justify to spend so much money on a SAK. For a lot of people this would be too much money,
so I think we would not get a lot of people on board.I like the laser etching because it is more durable than the printing method, right? But correct me if i am wrong.
Scales only also sounds better to me than complete knives. It is easier and cheaper to ship. Second, there are no restrictions on shipping scales to the UK for example and third, people can put them on their favorite SAK, so we might see them pictured more often.
They wouldn't be factory scales- they would have to be aftermarket somehow, as Victorinox won't sell scales only. By the time we look into custom 3D printed or CNC milled scales, we might as well have just bought complete knives from Victorinox.
Def
-
Seems like we've come full circle and are back to a commemorative SAK, which has been my preference all along. What if you took pre-orders and had people pay first? If you fail to raise the needed funds, you could just refund everyone, but if you made the minimum then those who wish to invest, can.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login