Rust issue, not only leatherman
-
@ducktapehero said:
Compared to Gerbers, Leathermans are virtually rustproof. :D :D :D::) ::)
What? They do rust bad. I was looking at one is a store and it friggin rusted away while I was looking at it!!!!
OK I lied, they're not that bad. I just find it amusing how people get offended when someone talks bad about their choice of multi-tool. We all know that Vic Spirit's are the closest thing to God-like perfection the human world will ever know but if your Leatherman works for you then carry it and enjoy.
As I've said before, I own an engraved Spirit with a pocket clip(Thanks again J-sews). It truly is one of a kind. As such I find it difficult to wear it out of the house too much. Until Victorinox gets around to putting pocket clips on their MT's, I'm considering getting a LM Kick with a pocket clip to carry around. It's a fine tool and if I lose it or break it(or it rusts away as LM's are known to do ;) ), it's no big deal.
I know Leatherman's and Gerber's don't rust that bad, I just couldn't resist saying it :D :D :D Luv ya guys!!!! In a manly sort of way of course.
-
Compared to Gerbers, Leathermans are virtually rustproof. :D :D :D
::) ::)
What? They do rust bad. I was looking at one is a store and it friggin rusted away while I was looking at it!!!!
OK I lied, they're not that bad. I just find it amusing how people get offended when someone talks bad about their choice of multi-tool. We all know that Vic Spirit's are the closest thing to God-like perfection the human world will ever know but if your Leatherman works for you then carry it and enjoy.
As I've said before, I own an engraved Spirit with a pocket clip(Thanks again J-sews). It truly is one of a kind. As such I find it difficult to wear it out of the house too much. Until Victorinox gets around to putting pocket clips on their MT's, I'm considering getting a LM Kick with a pocket clip to carry around. It's a fine tool and if I lose it or break it(or it rusts away as LM's are known to do ;) ), it's no big deal.
I know Leatherman's and Gerber's don't rust that bad, I just couldn't resist saying it :D :D :D Luv ya guys!!!! In a manly sort of way of course.
I don't get offended. I just find it amazing how much crap you swiss MT lovers can spread. I know what a good MT is and whats not. I know what works best for me. I just don't feel the need to tell everyone all the time. Not sure why you swiss lovers feel the need to. And the Spirit perfect? What a joke(IMO). The first spirit I bought had the loosest plier head I have ever seen on a new MT. It may be the best swiss made MT(much better than the Swisstool) but certainly not the best MT made(IMO).
And by the way. I have used the same Gerber for close to 10 years and there is no rust on it :D
-
Not the rust discussion AGAIN! ::)
All tools will rust if not properly cared for, regardless of brand (excludes H1). Sure one may rust slightly faster than the other in certain conditions but does it matter? Saying how LM stuff rusts all the time can get on my nackers as well TBH as it is not true. I have had a PST now for 6 years and have done next to nothing to look after it and guess what? It hasn't crumbled away to a lump of brown and infact there isn't a spot of rust on it. I think it was Mike that commented on not cleaning his saw for a day or so on a Vic product without being concerned, well I used a Hybrid to saw sodden dead branches in my garden, then got mud on it, then put it away and forgot to clean it for a good 2 months (I don't garden very often :D ) got it out, quick wipe and still no rust. I personally have had more rust experience with Vic stuff but does that mean Vic's rust easily? I very much doubt it.
Remember this rant for the next rust discussion which I'm sure will be in the next couple of weeks.
-
@Benner said:
Not the rust discussion AGAIN! ::)All tools will rust if not properly cared for, regardless of brand (excludes H1). Sure one may rust slightly faster than the other in certain conditions but does it matter? Saying how LM stuff rusts all the time can get on my nackers as well TBH as it is not true. I have had a PST now for 6 years and have done next to nothing to look after it and guess what? It hasn't crumbled away to a lump of brown and infact there isn't a spot of rust on it. I think it was Mike that commented on not cleaning his saw for a day or so on a Vic product without being concerned, well I used a Hybrid to saw sodden dead branches in my garden, then got mud on it, then put it away and forgot to clean it for a good 2 months (I don't garden very often :D ) got it out, quick wipe and still no rust. I personally have had more rust experience with Vic stuff but does that mean Vic's rust easily? I very much doubt it.
Remember this rant for the next rust discussion which I'm sure will be in the next couple of weeks.
We should be so lucky. ::) The way things are going ATM it seems to crop up every couple of days. Quite frankly it's boring. :-\
-
I think the only other thing that gets mentioned (that could vaguely be considered "on topic" on a multitool forum) these days is how wonderful half a dozen people think the Spirit is.
It bugs me, I know it bugs you, and it also seems to bug a few other long standing posters here too. It has frankly become very tiresome having the relative few's opinions and limited experiences shoved in my face and held up as facts.
Some of us on here own (literally) hundreds of multi tools, so probably have a better idea about the differences between tools than most. You can spot them quite easily - they're the ones who tend to either stay away from or dismiss these stupid (and often exaggerated) posts.
For the record, I have well over 100 Leatherman tools and the only rust I have ever seen on them is on "bargains" I've picked up on ebay, and this just usually wipes off. Only once or twice (both on 20 year old PSTs) have I seen rust that has actually penetrated the the polished finish in the tools so that they cannot be totally restored. There are plenty on here though that think that I've just been lucky (100+ times) ::)
-
how about a sticky post, FAQ style, that could help avoiding the repetitive talk.......just my opinion ::)
-
Dave and Ben, those were excellent responses!

-
-
<sigh> Can we just right YMMV and BUSTED on a big metal platter and drop it on the head of this thread from some 1000 feet high? Please?

-
I think that's the last thing we should do noth. The reply is going to be so full of holes, many of us are going to get a real kick out of it.
-
here we go...DaveK is in now... :D
-
I am frankly quite surprised. I've had so many corrosion issues with Leatherman tools over the last 15 years, and so few issues with Victorinox tools over the same period of time, it's hard to believe that I'm using the same brand of tools as some of you. This is coming from an avid outdoorsman, who lurks where the water is.
-
::)
-
@Leatherman123 said:
::)Tbh, I've no problem with Buzzbait's post - he's simply recounting his own experience. If everyone did that I don't think there'd be half as many arguments.
My experience has been different, no problem.
-
Yeah, I have no problem either. Did he use a water displacement product afterward? :) The main cause for LM's getting surface rust is because of improper maintenance.
-
Not the rust discussion AGAIN! ::)
I think the only other thing that gets mentioned (that could vaguely be considered "on topic" on a multitool forum) these days is how wonderful half a dozen people think the Spirit is.
Some of us on here own (literally) hundreds of multi tools, so probably have a better idea about the differences between tools than most. You can spot them quite easily - they're the ones who tend to either stay away from or dismiss these stupid (and often exaggerated) posts.
Some of us can't afford to own hundreds of multitools :(
I wouln't say the Spirit is the best multitool out there but for me personaly it is the best one , like the Charge is for you .
Dunc
-
@Mike, Lord of the Spammers! said:
It' not just a question of rust though, LM's require far more car and attention that Vic will ever do.
I'm sorry, I only just saw this and I'm pretty sure it is the biggest load of b****cks I have ever read. What a ridiculous statement.
Do you want to rethink it?
No I don't because as I've stated many, many bloody times I have had problems with them, they did all rust in the time I had them (even the Core and I only had that for 4 weeks!) I've got a new PST sitting at home, and I know damn well when i use it, it'll rust, I'm not particularly bothered by it, as it'll only be used very ocationally, but if I was using it everyday it'd be a different story :'(
I know my opinion clashes with your's Dave, but them's the facts as I see and have experienced them, they do require more care and attention if you plan on using them as a regular edc as I've sadly proved to myself on plenty of occations, how many of you LM fans swear by various lubricants?
As I've said before (endless amounts of times) I've had all the major brands, and have edc'd a fair cross section of what's out there, and as corrosion resistance is so important to me (seeing as I'm out in all weathers either working, cycling ect) the Swiss do work best for <u>ME</u>
I hope that's cleared it up ::)
-
Hey look at this banana!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
