SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
@CraftsmanSAK said:
Awesome tip and technique! I have a few others I really need to get some brass rod just for things like this.Thanks Craftsman.

The trouble is getting the 2.2mm brass rod. I am very fortunate to have a friend that’s real old-school and makes his own wire, and made some up for me /post/2022950
-
Day 22
I used the main blade to cut my afternoon snack in half. Peanut butter and cayenne pepper. Mmmm. -
@comis said:
...
Hey, Max. Did you ever try modding the led module with a brighter led? That's something I have meant to do forever, but never get around to.
:DHi comis, it should be the same as the grey module, the design seems identical other than the clear plastic. I only have my XAVT and Expedition Lite with the new module, so a little hesitant to take either of these apart.

But I think what you mean is putting a brighter LED in? No, not tried that...but should be possible if you can source the right LED.
-
Day 22
The SC helped cut a little breakfast snack

Then needed the help of the CT bit driver to reverse the clip on my new knife

-
@Simon_Templar said:
That's an interesting observation. I keep thinking about whether the bit driver is better to have than the magnifier/ Philips combo. Problem is, you cannot get it together with pliers (which I like to have) in anything smaller than the SC :(I also consider the inline Phillips a better tool than the bit driver for my needs.

You could swap the scrapy thing from an Angler with the Phillips from an Explorer. Would give you inline Phillips and pliers in 4 layers (+ a Climber left over). -
@SirVicaLot said:
Same story here. Never used it for that purpose until I got the Pioneer. Gotta say though, imho the inline awl is far better than the backside awl.
my dilemma is that I like the inline awl and the small blade...but you can thin down the Pioneer awl and drop it in as a replacement.
-
Day 22
CT Lite handing over to CT-41. Even though the 41 is the big brother, the Lite is a smidge wider because of the LED module!


-
DAY 22
Tightening down a throttle cable adjustment.
-
Day 22
Challenged by Comis, I opened another bottle of wine today, this time with the CT Lite. I managed, of course, but not in style.


-
Day 22. In my spare time; I got started on getting the Marklin set up and running. The reversing mechanism is fine. Turns out, I just didn't understand my transformer. Turning the dial all the way to the left just switched the direction one way or another, and the throttle still worked either way.
Track ends were FUBAR. Most were bent and twisted at least 20 degrees; and the connectors were mangled. Had to use the pliers to try to straighten them up enough to connect. I am buying new connectors, and will eventually change out the track if I can't fix it. Didn't take a photo then...
Axles had fell off the coaches in transit, and I used the pliers again to bend the fixed trucks just enough to hold them on better.
To decouple the cars when switching from shunting to pulling, , I used the CT driver. Works pretty good.
All set up. Due to the wrecked track ends, it runs rough and details constantly. Thus a LOT of work to go. Despite who knows how much abuse and neglect, everything mechanically and electrical is perfect, however. German engineering and manufacturing at it's finest.
-
@Antti Lammi said:
Actually bit better than my last stone i used, loved how easy is to sharpen with this, tho i didnt use ceramic discs to finish job, used sandpaper to finish it.Gotta recommend dual sharpener , easy to carry and makes blade sharp again pretty easily. I tend to use blade bit roughly sometimes so i dont make them too sharp on those tools what i use at work.
Only Tools Matters
What will be your go to for dual sharpener? I love the Spyderco double stuff and DMT double sided pedal, those works great.
@ElevenBlade said:
Day 22It wasn't until I got the in-line awl on the Solider that I started getting in the habit of using it. Turns out, it's a great way to save the tip of the blade, and keep from gunking it up with glue from tape.
Opened a box of take out for lunch today.

Corkscrew /
Phillips \I kept reading about this and meant to do the same, but have been using the blades for the jobs for years and that old habit dies hard.

Applied some oil to all implements after cleaning. Now it's running smooth again. Like new!
I have always been told to take care of the tool, then it will take care of me when needed.@Alan K. said:
Day 22
I used the main blade to cut my afternoon snack in half. Peanut butter and cayenne pepper. Mmmm.Anything spicy is Mmmmm in my book.

@Sos24 said:
Day 22
The SC helped cut a little breakfast snack
[IMG]https://uploads.tapatalk-cdn.com/20200422/c27d10cf0680d9b46dff221641a38293.jpg
Then needed the help of the CT bit driver to reverse the clip on my new knife
[IMG]https://uploads.tapatalk-cdn.com/20200422/549aa9de385b2038c5532d47bf9a73bf.jpgLooks great! I don't know what got into me, but I've been craving some steak lately. And when I saw your post, I could have sworn I read breakfast steak and my eyes just rolled open wide.

@Max Stone said:
Hi comis, it should be the same as the grey module, the design seems identical other than the clear plastic. I only have my XAVT and Expedition Lite with the new module, so a little hesitant to take either of these apart.
But I think what you mean is putting a brighter LED in? No, not tried that...but should be possible if you can source the right LED.
Yes, swap in a brighter led, I don't use the led on SAK often enough, and do think their led choice was never really bright. It'd be great if they could install a small led light in the scale of 91mm though.

-
@Max Stone said:
Day 22CT Lite handing over to CT-41. Even though the 41 is the big brother, the Lite is a smidge wider because of the LED module!


@CraftsmanSAK said:
DAY 22Tightening down a throttle cable adjustment.
I have seen parts of the ride here and there, will we be seeing the whole picture sometime?

@Simon_Templar said:
Day 22Challenged by Comis, I opened another bottle of wine today, this time with the CT Lite. I managed, of course, but not in style.
Whatever lacking in style, your willingness to do it with the CT definitely makes up for it.
Now I am inspired to open a bottle sometime soon! :D@cody6268 said:
Day 22. In my spare time; I got started on getting the Marklin set up and running. The reversing mechanism is fine. Turns out, I just didn't understand my transformer. Turning the dial all the way to the left just switched the direction one way or another, and the throttle still worked either way.Track ends were FUBAR. Most were bent and twisted at least 20 degrees; and the connectors were mangled. Had to use the pliers to try to straighten them up enough to connect. I am buying new connectors, and will eventually change out the track if I can't fix it. Didn't take a photo then...
Axles had fell off the coaches in transit, and I used the pliers again to bend the fixed trucks just enough to hold them on better.
To decouple the cars when switching from shunting to pulling, , I used the CT driver. Works pretty good.
All set up. Due to the wrecked track ends, it runs rough and details constantly. Thus a LOT of work to go. Despite who knows how much abuse and neglect, everything mechanically and electrical is perfect, however. German engineering and manufacturing at it's finest.
Back then when hobby shops are more common, I used to watch all those really cool train tracks and get endless amusement by that. Sometimes it's not even just about the train set, but all the detail works painstakingly put in to make it real. -
Day 23
CT-41 cutting some old cucumber for the bird feeder.


-
DAY 23
SC with some friends



-
Nice work, everyone!
**
Day 23**Probably a little early, but as I planted my tomatoes out last week, I thought it time to stake them before the squirrels sit on them ( it happened last year, thankfully only one plant damaged!) - these are the cherry toms, the plum tomatoes and some tumbling toms are planted in another bed which is in shade at this time of the morning. SC’s small blade did cutting duty on the jute twine.

-
I also promised an off topic pic of my EDC combo of yesteryear, some 39 years old now! My old Seiko 5 and my first SAK, the Master Craftsman/Astronaut (it had blurb saying how it was used as a piece of kit on space shuttle missions by NASA, sadly since lost along with the box when my parents tidied up whilst I was away at university....) now sporting blue + scales to replace the badly scarred originals - the metal bracelet on the Seiko also suffered badly getting knocked on metal shelving over many years of use in a supermarket when I stacked shelves to pay my way through university and is long gone, though the Perspex watch glass has cleaned up nicely with Brasso and all the scratches are gone, leaving only a small crack which no amount of polish will remove! Given it’s cheap price (it was less than the SAK!) it was surprisingly accurate and lasted me 11 years before getting replaced with a mechanical TAG Heuer Which I gave to friend some 6 years later after he was mugged and had his watch stolen - I was after a “new” secondhand in any case at the time from Austin Kaye on the Strand (anyone else remember them - used to be one of the few places to get good secondhand watches before the internet?), an Ebel Voyager since sold on for a small profit!
Any how, enough rambling, and here they are, the fruits of my labour in Tesco in autumn 1981:

-
@Max Stone said:
Day 23CT-41 cutting some old cucumber for the bird feeder.

Do other animals also treat themselves to the bird feeder food?

SC with some friends

That's rad(red). Pun intended. :D
@Rizio Il Ghiro said:
Nice work, everyone!
**
Day 23**Probably a little early, but as I planted my tomatoes out last week, I thought it time to stake them before the squirrels sit on them ( it happened last year, thankfully only one plant damaged!) - these are the cherry toms, the plum tomatoes and some tumbling toms are planted in another bed which is in shade at this time of the morning. SC’s small blade did cutting duty on the jute twine.
Good use!

@Rizio Il Ghiro said:
I also promised an off topic pic of my EDC combo of yesteryear, some 39 years old now! My old Seiko 5 and my first SAK, the Master Craftsman/Astronaut (it had blurb saying how it was used as a piece of kit on space shuttle missions by NASA, sadly since lost along with the box when my parents tidied up whilst I was away at university....) now sporting blue + scales to replace the badly scarred originals - the metal bracelet on the Seiko also suffered badly getting knocked on metal shelving over many years of use in a supermarket when I stacked shelves to pay my way through university and is long gone, though the Perspex watch glass has cleaned up nicely with Brasso and all the scratches are gone, leaving only a small crack which no amount of polish will remove! Given it’s cheap price (it was less than the SAK!) it was surprisingly accurate and lasted me 11 years before getting replaced with a mechanical TAG Heuer Which I gave to friend some 6 years later after he was mugged and had his watch stolen - I was after a “new” secondhand in any case at the time from Austin Kaye on the Strand (anyone else remember them - used to be one of the few places to get good secondhand watches before the internet?), an Ebel Voyager since sold on for a small profit!Any how, enough rambling, and here they are, the fruits of my labour in Tesco in autumn 1981:
Thanks for sharing the story! Sometimes it not just the tools/EDC, but the memories created with it that made them all that special! -
Day 23

The 100 years anniversary SC. It 's hard to imagine a knife/MT company had been producing high quality tools with decent value can continue with this kind of consistency for so many years, and another 23 years have passed since that 100 years anniversary. -

The 100 years anniversary SC. It 's hard to imagine a knife/MT company had been producing high quality tools with decent value can continue with this kind of consistency for so many years, and another 23 years have passed since that 100 years anniversary.I never seen this one before

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


