3D Printer Blog
-
much better...
kinda glad I held back, back to Paris Monday

-
Shipments are all wonky right now anyhow. If it isn't Amazon holding on a package for a few weeks too long, it is Canada Post snailing it to me. I mean, packaged that linger at a location for a few days, etc. I know they are overburdened. It just is frustrating. I am still waiting for those 2 rolls of PLA which I was supposed to have last Friday.

-
I wanted to print a little flexi Rex key-chain last night, I kept getting a non-manifold error in Cura. When I sliced it, and reviewed it, it looked good. However, when I went to print it, I got a lot of spaghetti filament lay-down,.I aborted the print twice and gave up. I even re-leveled my print bed. I did that because the filament was not sticking to the bed as it should.
Well I woke up this morning and tried something else. That worked out great. So I take it anytime I come across a manifold error, I should drop it quick like a ticking potato masher and move onto something easier. I will look into what a manifold error is as well.

-
@Chako said:
I wanted to print a little flexi Rex key-chain last night, I kept getting a non-manifold error in Cura. When I sliced it, and reviewed it, it looked good. However, when I went to print it, I got a lot of spaghetti filament lay-down,.I aborted the print twice and gave up. I even re-leveled my print bed. I did that because the filament was not sticking to the bed as it should.Well I woke up this morning and tried something else. That worked out great. So I take it anytime I come across a manifold error, I should drop it quick like a ticking potato masher and move onto something easier. I will look into what a manifold error is as well.

Non-manifold errors are usually caused by the 3D modelling not being clean (as in keeping it simple with just the operations needed), not being tight (as in waterproof solid models) or tolerances being too large for the printing program to accept joined edges as actually being joined. (That said I think some 3D printing programs might introduce some issues all by themselves with less than optimal slicing).
Once you start doing your own 3D modelling you can make your own stuff and avoid faulty models.

-
10-4.
Today, I printed 3 ear savers for mask wearing. They turned out very nice.
-
This is what they look like.
<a href="https://flic.kr/p/2j4qsRd" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49921836862_73d3580e6e_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8497A by Chako, on Flickr
Also got a package in today, and still not my filament in black either...sigh. However, when I bought this 3X, the seller promised 5 nozzles. Seeing that they seller COMGROW hasn't responded to my email, I decided to buy some extra. Now I have 24 of them in various sizes.
<a href="https://flic.kr/p/2j4qsPK" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49921836777_c588ba142b_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8500A by Chako, on Flickr
Along with the nozzles came the metal extruder kit.
<a href="https://flic.kr/p/2j4oVsT" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49921536171_407e81b824_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8501A by Chako, on Flickr
-
Nice earsaver. I purchased a bunch of earsavers and gave them to a couple nurses I know. They gave them away at a couple local hospitals and said them were greatly appreciated.
-
Found this on Reddit, looks like a fun thing to try!

-
Just did the all metal extruder upgrade. That went fairly easy, and now I do not have to worry about plastic parts getting eaten by moving filament.

-
@Vidar said:
Now my head hurts...

The only way I can think of making that is Photoshop.

Forced perspective. :)
https://www.thingiverse.com/thing:547580 -
@Don Pablo said:
Forced perspective. :)
https://www.thingiverse.com/thing:547580Agh! My head! Again!!
That is a fun one!

-
I tried a different Flexi Rex and this one turned out great. No manifold errors on this one.
<a href="https://flic.kr/p/2j57o3u" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49929625176_c274862470_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8504A by Chako, on Flickr
-

Cute thing. -
Nice one :) Now I feel inspired to do something with a 3D printer, but lack actual inspiration for things to make..

Maybe a hammer? Some keychain thing? A holder for varies small tool tidbits?
I think I need to sit passively in front of the TV for a while until opportunity knocks or o'inspiration hits.. It has never happened yet, but there is a first for everything I've been told.
-
I just can't wait to get something other than red.
Vidar, take a look at thingiverse.
I found a Japanese artist on thingiverse who has great talent making figurines. Lots of them are nudes mind you, but I would like to try one or two down the road. Look up COLOR3DJP.
-
Received my 2 rolls of black PLA today. I didn't know Canada Post delivered packages on a Sunday. :ahhh
Best part, I saw the out for delivery message on my cell phone, and discounted it as a mere flight of fantasy. I rechecked an hour later and it stated delivered.

I go to my house and see nothing. I figured I may as well do a tour of the property and sure enough, it was hidden on the side of my house. Good think I decided to look under rocks just in case.

On the other hand, happy that I now have some black. :D
-
Hi Chako,
Just came across this. I bought an Anycubic delta printer 2 years ago, and recieved a box o'parts! In the end, it was a good thing for me though, as I learned a lot about why things happen- and what to do to fix. Not that I'm any expert, just took a different tack.
We use Solid Edge 3D software at work, so I have a slight advantage over some when making the original model. That said, I use Fusion 360 at home. It's free, and more than adequate for making simple geegaws to make life better. Or at least more interesting.
Try to keep your PLA in something sealed when not in use- especially in the humid summer. I have two spools that are too brittle to use, until I can get them dried out again.Cheers,
dc
-
@Chako said:
I just can't wait to get something other than red.Vidar, take a look at thingiverse.
I found a Japanese artist on thingiverse who has great talent making figurines. Lots of them are nudes mind you, but I would like to try one or two down the road. Look up COLOR3DJP.
I'm generally into making stuff myself, and preferably something useful at that. That said that Thingiverse place seems to have a bit of everything, and if something handy is already made then all the easier.
Hm. I might need some kind of gripping wheel to roll some rebar into even round arcs. That seems like a half good plan.
-
Roger on the filament storage. The Overture filament I have so far bought comes in a reusable zip lock bag with a desiccant packet inside. I did buy 4 rolls from PrintOxe to try it out. That may not come seal-able bags.
Vidar, I did try one of that artists works. I was a bit surprised it was so small. I had to scale it up 600x to get this...but it did turn out very nice. It took a little less than an hour at 80 mm/s speed.
<a href="https://flic.kr/p/2j5x58S" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49934442736_3ad5a4bfb5_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8506A by Chako, on Flickr
I just bought a set of roller bearings online. I see that the included spool holder sucks. I have printed about 3/4 of a roll of red PLA thus far, and noticed a bit if a squeak on my last print. I examined the roller and saw a lot of black powder between the holder and the filament spool. A quick wipe did the trick but I decided to go over to Thingiverse to search for an Ender 3 spool upgrade and saw the perfect thing that uses skater ball bearings. That should fix this issue.
I must admit, I am having way too much fun with my Ender 3. Even upgrading it is kinda fun so far.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login