3D Printer Blog
-
I think it did, but the fans on the extruder are still loud.
-
In the process of printing a storage drawer designed to fit the front empty space on the right between the LCD panel and the Y axis arm.
<a href="https://flic.kr/p/2j3DFHf" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49913100092_df54ac29ec_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8482A by Chako, on Flickr
<a href="https://flic.kr/p/2j3CadP" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49912802411_be105ccb8e_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8483A by Chako, on Flickr
My original plan was to do all the printer upgrades in black, and to learn with the red filament and to create my computer parts using it as my computer case is red. I ordered 2 black PLA 1Kg rolls of filament from Amazon, which was supposed to be in last Friday. Of course nothing is on time anymore because of COVID 19 and the probably big hit from everyone buying online these days. I will say, black and red for a 3D printer is a flashy combo, albeit not planned.
I had wanted a 3D printer for about 10 years now...and kept putting it off till prices went down, and the tech matured. I also wondered what I could possibly want to print or to put a 3D printer to use. Well now that I have one, the possibilities are limitless. I can even create simple parts from scratch using TinkerCad. Mind officially blown!
-
The print just finished, and it was a success. This will give me some much needed storage space and it is locked into the printer and slides in and out for ease of access.
<a href="https://flic.kr/p/2j3ETgU" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49913334102_9216982331_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8487A by Chako, on Flickr
<a href="https://flic.kr/p/2j3Dn8U" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49913037606_2a350b124e_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8486A by Chako, on Flickr
All that I think I need to do is to print out a tool holder that will hang off the gantry and I think I have the printer where I need it for now. I will print an LCD back protective cover once I get the BigTreeTech motherboard, then I can install the newer LCD that I already have...seeing that it has a USB and a SD card slot on the right hand side...which will be a big upgrade compared to the awkwardly placed micro SD card on the front.
-
Here is the tool holder. Lots of designs out there, but to me, placing it on the gantry is the best place. Surprisingly enough, the printer came with a pair of screws and anchors that were not required in the build...and this tool holder puts them to good use.
<a href="https://flic.kr/p/2j3MiS9" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49914587496_f084395250_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8491A by Chako, on Flickr
Room for a few extra drivers, etc.
<a href="https://flic.kr/p/2j3JLAT" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49914092103_62283d11d9_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8488A by Chako, on Flickr
-
That looks both handy and organized.

-
Agreed.
Painted quickly Yoda. The flash overpowered the brown on his coat and brought the red to the forefront. He looks a lot nicer in person. Now I have Yoda doing his little dance when the machine pulls filament. Kinda cute...and it is always a good thing to have the force with you at all times.

<a href="https://flic.kr/p/2j3PsQY" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49915007928_094e669e4f_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8494A by Chako, on Flickr
-
much better...
kinda glad I held back, back to Paris Monday

-
Shipments are all wonky right now anyhow. If it isn't Amazon holding on a package for a few weeks too long, it is Canada Post snailing it to me. I mean, packaged that linger at a location for a few days, etc. I know they are overburdened. It just is frustrating. I am still waiting for those 2 rolls of PLA which I was supposed to have last Friday.

-
I wanted to print a little flexi Rex key-chain last night, I kept getting a non-manifold error in Cura. When I sliced it, and reviewed it, it looked good. However, when I went to print it, I got a lot of spaghetti filament lay-down,.I aborted the print twice and gave up. I even re-leveled my print bed. I did that because the filament was not sticking to the bed as it should.
Well I woke up this morning and tried something else. That worked out great. So I take it anytime I come across a manifold error, I should drop it quick like a ticking potato masher and move onto something easier. I will look into what a manifold error is as well.

-
@Chako said:
I wanted to print a little flexi Rex key-chain last night, I kept getting a non-manifold error in Cura. When I sliced it, and reviewed it, it looked good. However, when I went to print it, I got a lot of spaghetti filament lay-down,.I aborted the print twice and gave up. I even re-leveled my print bed. I did that because the filament was not sticking to the bed as it should.Well I woke up this morning and tried something else. That worked out great. So I take it anytime I come across a manifold error, I should drop it quick like a ticking potato masher and move onto something easier. I will look into what a manifold error is as well.

Non-manifold errors are usually caused by the 3D modelling not being clean (as in keeping it simple with just the operations needed), not being tight (as in waterproof solid models) or tolerances being too large for the printing program to accept joined edges as actually being joined. (That said I think some 3D printing programs might introduce some issues all by themselves with less than optimal slicing).
Once you start doing your own 3D modelling you can make your own stuff and avoid faulty models.

-
10-4.
Today, I printed 3 ear savers for mask wearing. They turned out very nice.
-
This is what they look like.
<a href="https://flic.kr/p/2j4qsRd" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49921836862_73d3580e6e_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8497A by Chako, on Flickr
Also got a package in today, and still not my filament in black either...sigh. However, when I bought this 3X, the seller promised 5 nozzles. Seeing that they seller COMGROW hasn't responded to my email, I decided to buy some extra. Now I have 24 of them in various sizes.
<a href="https://flic.kr/p/2j4qsPK" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49921836777_c588ba142b_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8500A by Chako, on Flickr
Along with the nozzles came the metal extruder kit.
<a href="https://flic.kr/p/2j4oVsT" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49921536171_407e81b824_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8501A by Chako, on Flickr
-
Nice earsaver. I purchased a bunch of earsavers and gave them to a couple nurses I know. They gave them away at a couple local hospitals and said them were greatly appreciated.
-
Found this on Reddit, looks like a fun thing to try!

-
Just did the all metal extruder upgrade. That went fairly easy, and now I do not have to worry about plastic parts getting eaten by moving filament.

-
@Vidar said:
Now my head hurts...

The only way I can think of making that is Photoshop.

Forced perspective. :)
https://www.thingiverse.com/thing:547580 -
@Don Pablo said:
Forced perspective. :)
https://www.thingiverse.com/thing:547580Agh! My head! Again!!
That is a fun one!

-
I tried a different Flexi Rex and this one turned out great. No manifold errors on this one.
<a href="https://flic.kr/p/2j57o3u" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49929625176_c274862470_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8504A by Chako, on Flickr
-

Cute thing.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login