3D Printer Blog
-
I wanted to print a vase as something large and interesting to do. I found quite a few over at thingiverse, and decided to pull a nice model from there and print it. I import it into Cura 4.6.1 and found that after slicing it, it is solid. I went online to find out how to print this correctly. I located a setting called "spiralize outer countour". Apparently this will print any object with single wall thickness with a bottom and no top. Perfect. However, it took me several articles online to figure out how to activate it. You have to go into Cura settings and check a box among the hundreds of other boxes (found under specialized mode section). Once check-marked, the option comes up and enables you to print a vase. After activating this and slicing the model, it looks good to go. I am now printing it in black PLA, and am very curious to see if this print will work.
-
So far so good. Currently at 24% completed. I have found the glue stick works best when I flip over the glass plate to print on the smooth side.
<a href="https://flic.kr/p/2jaeSXG" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49987670718_3206460004_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8556A by Chako, on Flickr
-
Came out good. I was worried taking it off of the glass plate because the wall is very thin. I ran the glass plate under water and that did the trick. It popped off relatively easy.
<a href="https://flic.kr/p/2janEK7" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49989190516_fe4a5d7059_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8559A by Chako, on Flickr
-
@Chako said:
Came out good. I was worried taking it off of the glass plate because the wall is very thin. I ran the glass plate under water and that did the trick. It popped off relatively easy.<a href="https://flic.kr/p/2janEK7" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49989190516_fe4a5d7059_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8559A by Chako, on Flickr
Single pass thickness? That does sound thin! :ahhh
-
Agreed. Surprisingly enough, I filled it with water and it did not leak.That to me is a miracle. It does make a nice decorative piece. I am printing a different model right now.
-
The latest print using the spiralize outer contour mode.
<a href="https://flic.kr/p/2jaHQy1" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49993125752_08e0b546ad_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8571A by Chako, on Flickr
-
You certainly seem to keep your printers busy!
-
I really like that last one. Do you happen to have a link to it?
-
Printing out a retro rocket model right now.
If I had known how much fun having a 3D printer would be..I would have gotten one sooner.
-
And the completed rocket in black PLA. I scaled it larger from the original print size. I think it turned out very nice.
<a href="https://flic.kr/p/2jbktoN" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50000078606_92287b8eb8_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8581A by Chako, on Flickr
This model did not require any supports.
-
I took my time and I did it. The task was easy but harder because of the lack of good instructions. I was forced to watch multiple videos on how to install a BigTreeTech TFT35 E3 V3.0 and the BigTreeTech SKR Mini E3 V1.2 before starting this upgrade. I was a bit worried to bork something up during the install. I had my tablet next to me and I paused a few key videos during this install.
I started off with the screen upgrade. It wasn't at all clear on which video port to use. There were 3. I figured I woud install the screen and test it out on the board that came with the printer, but quickly found out after digging deeper in the lack of literature, that I could not activate touch screen with the Creality board.

With that in mind, then I had to figure out which cables go where, and did the motherboard upgrade at the same time.Apparently, you only need to use port 3 and the serial port on both as they were both BigTreeTech parts. Otherwise, i would have had to use only Port 1 or 2 on the LCD screen to the LCD port on the Creality main board. A simple sentence or two explaining this would have caused a lesser sense of confusion.
Here is the original Creality main board. It is V 1.1.4.
<a href="https://flic.kr/p/2jd4adq" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50019528652_49332ad776_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8584A by Chako, on Flickr
The majority of the leads are well labeled. I had to label only 2 plugs which wasn't all that bad. Here is the upgraded SKR Mini E3 v1.2.
<a href="https://flic.kr/p/2jd49Lo" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50019527142_951ea21eee_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8592A by Chako, on Flickr
This board is a huge upgrade over the bare bones Creality board. I will install the BLTouch auto bed leveling kit once I do the needed online video and article readings. At least this upgrade has the proper hookups for it without having to resort to little daughter boards which interfere with the main compartment closing properly.
So after a slow go, I turned on the printer and got this right away.
<a href="https://flic.kr/p/2jcZ7Aq" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50018739388_46f25ed413_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8587A by Chako, on Flickr
I can either go with the classical left, or the touch screen right. I can also press the main knob down for a few seconds to access this screen in either mode.
This is the classical view. A little different from that shown with the original mainboard.
<a href="https://flic.kr/p/2jd49S5" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50019527472_15974bda8f_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8590A by Chako, on Flickr
This is the touch screen interface.
<a href="https://flic.kr/p/2jcZ7t1" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50018738958_10bb6c0d37_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8589A by Chako, on Flickr
I tested both the nozzle and heated bed and everything appears to be working properly.

Next step is to install the auto bed leveling sensor and see how that works. Not sure if I should also flash the board as well. Need to read more I guess. I might also have to do better cable management. I have not installed the cover with the cooling fan on as of yet.
-
Got me some problems. I bought the official Creality BLTouch kit. Apparently, the wire included is different to what is required with the BigTreeTech SKR mini E3 board. Not sure what to do. Got to think about this one more I guess before I proceed any futher.
-
Ok, well I made some progress. I figured out that I needed to switch 2 wires around in a 3 wire DuPont connector. Everything appears to be working somewhat...just need to figure out how to flash the bios, and to find the right files online to do that. That will be for another day.
-
Well I am test printing something right now and I will say, the printer is a whole lot quieter. no more stepper motor noise. I still haven't flashed anything as of yet. I do have the BLTouch installed but nothing appears to work...I am certain I will have to find a firmware to flash to get that working.
-
I am struggling with the bad english instructions and often times confusing statements. With that said, I found several .BIN files and figured out which one I needed based on how I wired it on the motherboard. Changed the name to firmeware.bin and rebooted the printer with the micro SD card inserted, and it installed right quick and I now have a working BLTouch auto-leveling feature.
The hardware install was a bit entertaining...and so was the software update. Now I think it works...as it just did its 9 point measurement.The BLTouch sensor glows a nice bright red...and turns blue when taking the measurement. Visually, it all seems to be working.
<a href="https://flic.kr/p/2jdiSaD" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50022397983_33e48cb437_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8594A by Chako, on Flickr
A side bonus, the red glow is enough to light up the model during use.
<a href="https://flic.kr/p/2jdiS4G" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50022397638_a79d541372_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8596A by Chako, on Flickr
And the test print, a low poly panther. Printed this one before I did the firmware update...which I just finished about 10 minutes ago. this was more a test to see if I still had a working printer after doing the motherboard and LCD upgrade.
<a href="https://flic.kr/p/2jdiRX4" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50022397253_ea87270a6f_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8597A by Chako, on Flickr
-
You're making great progress Chako

-
I agree...but it forces me out of my comfort zone. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

