Warranty stuff
-
Hey guys.
I wanna write about my latest warranty experiences.
Leatherman vs Victorinox. My first Wingman had issues with the scissors. Replaced it. My second one was actually put to the test. It developed some issues here and there. Ok, found its limits, it will be replaced. And then i'll mod it a little, and give up the warranty. So, i'm a happy customer who'll probably buy more LM products. With a Rebar it was the same. Issues found, replaced without too many talking/writing.
Now, let's talk about the old swiss company. Here, i have question marks. A 26-27 yo Wenger will be replaced with its Victorinox counterpart without problems, or questions. But... on the other hand, a basically new and extremely unused Spirit XC has to be sent in service and checked. Because... i don't know why. I mentioned them the following: 1. when the pliers are opened, it takes just a tiny force to close them back. You can't work one-handed, it takes your both hands to control it, otherwise instead of opening the jaws to the max you're closing the tool. 2. The blade and all the other longer tools take just a soft kick to close on your fingers. I've noticed it wearing gloves, fortunately. And then i checked all the tools and geez...
So, i have to send it in, i might pay repair fees, etc...
What should i think of this whole situation?
P.S. the tools were checked by the romanian distributor, they confirmed the issues to Victorinox and LM and they got those answers about the future steps to be made. -
Stick with the Rebar it's a much better MT IMO
Sounds like Leatherman has a better warranty service. You shouldn't have to pay for repairs to a defective tool. :-\ -
Did they say that you will have to pay?
-
They wrote i might have to pay between 9,50 and 23,50€. But i have to send it in Switzerland. No other way
-
And i'm the one who has to pay for the shipping...

-
Weird. I sent in a 1990s SwissTool that a prior owner had clearly abused (right tool handles so stiff I couldn't open them--multiple dinged, bent or otherwised damaged), and our US office in CT just sent me a current production model no questions asked. They charged the maximum I allowed before them calling me; which was $10? I think.
-
I've not had issues with either company here in the States, but I'm beginning to hear more and more quality issues with Vic. I hope this isn't a trend....
-
** Comment deleted due to Edi feeling that it was not a relevant contribution
-
@ElevenBlade. I have no provlems with LM. I think i wrote clear enough what, why, when... I'm not sure how your answer is helpful in this thread. Seriously
-
@Edi said:
@ElevenBlade. I have no provlems with LM. I think i wrote clear enough what, why, when... I'm not sure how your answer is helpful in this thread. SeriouslyNot to worry. I removed my comment from your thread.

-
@ElevenBlade said:
Not to worry. I removed my comment from your thread.
Thank you. I wrote about my question marks about a Spirit that was basically unused. I think half an hour work was the total. Not even actually. 20' max. So, for that, i don't really care about their expenses and how they are managing their entire company. But if you really wanna go there, i can write about esee. Low quality blades overall, exactly like Victorinox steel blades, but outstanding warranty. And i can say LM has better blades, better warranty.
And i wrote about a specific situation. Why do we have to go so deep and actually extremely shallow in the economics that a company may/or may not put in place!? -
And i wrote about a specific situation. Why do we have to go so deep and actually extremely shallow in the economics that a company may/or may not put in place!?
In short, and I mean no disrespect - because you, and your tool, are probably irrelevant to the situation, whereas either the global policies of the manufacturer or the local policies of your retailers and distributors, as well as any applicable state laws probably are.
For example, in my fine country - I can not be held liable for any costs resulting from a faulty product - include shipping, and if the faulty product damages or injures anything in the act of being faulty, the supplier foots the bill for that too (There's pros and cons to high levels of government interference....) - so if the issue were with one of my tools, even if Vic charged eleventy billion dollars for repair, it would be the company that supplied me the tool's problem to pay that, not mine.
the laws in your country may be very different, and the retailer may be free to joyously pass on their costs to you.
As for Vic's role in this - I speculate wildly, but it's possible the older tool is too-hard-basket for them, so they just issue a credit to the store and tell them to give you whatever in return, but they still have/use the tooling for the Multitool, so it is economical for them to get the faulty one into the factory and see if it can be rectified, or salvaged.
What should you think of the whole situation? "Not much"
You are dealing with manufacturers from different nations, through a supplier/retailer in a third nation (who in turn may be dealing with one or more distributors)Might as well compare apples to chainsaws.
-
My dear Sea Monster, and i'm not sarcastic. True... and yes, our EU regulations should apply and should be applied. Not. Simple as that. I'd have to bring Victorinox in Court for the shipping costs. They don't give a rat's ass. My bloody distributor has to pay for the shipping. They aren't doing it. But at least they aren't too... bitchy. It's complicated overall, i just hate the fact that they have to chech a smurfty tool
-
This is it

-
and the tool will get back to me. Then, i'll shoot a video of it
-
And over here, in Belgium, I've had the exact opposite experiences with both companies.
For my flawed Charge TTi (both sides had rulers from 8cm to 16cm, clearly a production error) they wanted me to pay shipping costs and on top of that 15 Euro administration fee (because I didn't buy the tool from a Belgian Leatherman dealer). So I just ended up keeping my flawed Charge TTi as a gimmick (Leatherman U.S.A. did send me a T-shirt and some stickers after I contacted them about the Belgian distributor's "administration fee".)
While Victorinox exchanged my son's "my first SAK" with a new one, no questions asked, no costs (did have to wait 4 weeks for it to arrive, but that was the least of my worries).
Different countries = different distributors = different rules...
-
Nope. Same country different products, rules whateva
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
.