Knot in October GAW
-
Guess what I'll be doing today? Yup tying the Zeppelin knot over and over again.
-
-
-
We are enjoying a lot and learning much with this challenge.
Nice to learn the Zeppelin knot
-
-
-
-
Last thing you want around your neck is a noose that'll tighten when under tension. Walking around the woods with lanyard on is not something I do unless its a breakaway

-
I've been playing around with RF's knot....

My bight's tail was a bit long, and I thought there could be the potential to get the tail of the bight stuck in the bight....forming a non-slip knot.....

(Knot likely, but a possibility.)
So, like with other knots, I secured the tail to the loop with an extra overhand knot:

Which could then get snugged down to make a neater overall looking knot:

I don't think this interferes with the breakaway function:

With one good yank, it popped apart:


-
-
-
@Nix said:
I've been playing around with RF's knot....
My bight's tail was a bit long, and I thought there could be the potential to get the tail of the bight stuck in the bight....forming a non-slip knot.....

(Knot likely, but a possibility.)
So, like with other knots, I secured the tail to the loop with an extra overhand knot:

Which could then get snugged down to make a neater overall looking knot:

I don't think this interferes with the breakaway function:

With one good yank, it popped apart:


Nice one

I really need to work on my knot game
Sent fra min FRD-L09 via Tapatalk
-
-
You've come to the right place then. There have been some really good knots tied already. I'm sure the are more to come that will be equally awesome.
If I can come away with muscle memory of the ones I submitted and 1 or 2 new ones I'll be so happy.
-

-
-
@Aloha said:
You've come to the right place then. There have been some really good knots tied already. I'm sure the are more to come that will be equally awesome.If I can come away with muscle memory of the ones I submitted and 1 or 2 new ones I'll be so happy.
Some very impressive knots
great to have them collected here to learn from 
Sent fra min FRD-L09 via Tapatalk
-
Here goes my 2nd entry.
One would think I entered more often as I seem to have a variation of a knot or tying it on almost every knot shown.
Sorry about that. 
Now, I mentioned the figure 8 knot many times over already here in the thread as it's the most important and reliable knot I know and use. And to my great astonishment no one has yet used it.
There are many variations and iterations of it, and I could probably post all my five entries with just those, but we'll see what others have on their minds. 
This entry is actually two knots, as it combines the figure 8 with another woven in figure 8. As I used a knot for connecting two ropes the first time around, I decided to continue with the tradition.

A double fisherman can be used to connect two ropes of same or different diameters safely. The figure 8 can't. It's only appropriate for connecting two ropes of same diameters. So 10mm rope to 10mm rope and so on. If you use different diameter ropes, the thinner one could slip out, and that's BIG safety hazard. Now, why would one use it then? Cause you can if you make a figure 8 on your first rope, connect the two ropes and also add an attachment point to safely pass a knot on the rope.

So here goes...
Take a bite of a rope and wrap it around itself as shown in the pictures, one wrap around makes a figure 6, also a good and simple knot, two wraps make a figure 8, and if you'd continue passed that and add another wrap before you passed the bite through the hole, you'd make a figure 9. but that's for a knoter knot story

Pull it tight and you have yourself a very safe figure 8. The working end of the rope should always be on the top of your knot so you tighten it even more when under load. And it is important to make it look nice, so no overlaps and crossed threads, every overlap you make reduces the load baring capabilities of a knot by about 25%. See how pretty the knot can look like?
Now, to connect the second rope, you loosen the figure 8 a bit, and pass the tail of the second rope through the two strands, follow the two strands all the way till you've repeated all the wraps around the knot. Tighten it and you have yourself a nice and useful knot.





-
@enki_ck said:
Here goes my 2nd entry.One would think I entered more often as I seem to have a variation of a knot or tying it on almost every knot shown.
Sorry about that. 
Now, I mentioned the figure 8 knot many times over already here in the thread as it's the most important and reliable knot I know and use. And to my great astonishment no one has yet used it.
There are many variations and iterations of it, and I could probably post all my five entries with just those, but we'll see what others have on their minds. 
I love the discussions, so please continue to add your insights!
I, too, am surprised the universally loved figure 8 knots have not been seen before now! The Figure 8 series is hugely useful. Everyone should know and love the figure eight: simple and strong!
I can only give you credit for one knot at a time....so let's go with the fabulous Figure 8 on a bight that you tied. I've also heard the it's important to keep the working end up on the top of the knot.
However...I once saw some testing that suggested this is not as critical as we have supposed. Still...I tie it the way you do!

-
If I remember my stats correctly, the difference between the top and bottom position of the load bearing line is 10%, so not a big deal, but the correct one is easier to untie once it has been under load.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



