Vintage SAK Owners Club
-
Thank you Ulli - I have updated on the Wiki. Huntsman will need to update the threads on the forum.

-
@ulli said:
MT is a really good place to bring people together, to share the knowledge, but I m not sure if its the perfect place for content based on facts and evidence. I m not sure if you know what I mean. Its a platform for discussions, for sharing. My intention with the tang stamp sheet was not to bring a perfect product that is 100% correct, because almost every day I see and learn something new. And thats the way I like it, to create something as a base for discussions. Thats very common in science. If you buy today a book in biology, in 5 years its worth nothing, because its already too old, not accurate, because now in 2020 people know much more than in 2015. But the problem with online content like here on MT is, that you cant replace old content with new content. So I see old tang stamp sheets everywhere, on online auctions, on homepages, most time with a claim that its 100% correct.Sadly, you are right. This is the problem with static unchanging sources of info.
It is one of my main challenges in improving the chronology data available here and ultimately in the Wiki.
Like the “1973” Hoffritz Champion for sale above which is actually c.’76. It would be nearly impossible to correct such errors because they feel that they have done ‘extensive research’ on the matter. I know, because I’ve tried.
The tang stamp updates, both yours and the wiki, will go a long way toward making it better.
My thanks to all who have participated in the wiki update. And especially to Max for taking the lead and listening to all the input. Excellent.
Not to say that it is or I am done with some of the refinements I need to get to, but it really is a huge milestone for the wiki regarding more accurate chronology.
-
kamakiri, and the Wiki will continue to be developed to be a valuable resource 
And I saw what you did, good signature :D

-
-
@Max Stone said:
kamakiri, and the Wiki will continue to be developed to be a valuable resource 
And I saw what you did, good signature :D
:D Imitation is a sincere form of flattery! ;) I like the way you worded that. Better than I would do.

@MiniChamp said:
Why do you think that it's c.’76?I know it’s c.’76. There are perhaps a dozen things that confirm it. The seller’s pictures are very good, and it’s very easy to see what I need to see.
There are more obscure reasons like the similarities to a Hoffritz Super Knife I own...aside from one part that does not exist before ‘76 or ‘77. And I have lots of main line Champions produced on either side of this date range.
@MiniChamp said:
It seems to have a 2.7mm Victoria-era spring/corkscrew/main-blade-shank combination.Are you 100% certain about that? I suggest looking at the pictures again. More cost effective than spending $400+ for it.
@MiniChamp said:
I don't recall encountering before any claims that such SAKs were produced after 1974.Well, now you have. But I’m pretty sure we skirted the topic of your changeover theories in this time frame before. I’ll eventually get to the proof in the “dating in the ‘70s” series, assuming I don’t croak before then.
-
@kamakiri said:
I know it’s c.’76. There are perhaps a dozen things that confirm it. The seller’s pictures are very good, and it’s very easy to see what I need to see.You are not really answering the question. Clearly, if you think that this SAK is c.’76, it's because of some "things" that you see in the pictures. The question is: What are those mysterious things?
Are you 100% certain about that?
I'm never 100% certain about anything, but I do believe that the attached image shows a 2.7mm Victoria-era spring. If I'm wrong, then surely you have an appropriate post-Victoria-era SAK with a 2.4mm spring that looks like this one. Can you show images of such a SAK?
Well, now you have.
Well, now you got me confused. Are you claiming that I'm wrong about this particular SAK having a 2.7mm Victoria-era spring or that SAKs with such springs were produced at least until 1976 (or both)?
I’ll eventually get to the proof in the “dating in the ‘70s” series, assuming I don’t croak before then.
I'll be extremely happy if you will ever start providing some sort of evidence to support your claims. Until then I tend to consider them as being quite questionable.

-
Let me not answer that with another question:
If you were Victorinox and you ran out (intentionally as part of the 2.7mm phase out) of one of those parts, but not other components in this layer, what would you do in order to use those other parts?
Regarding c.’76, there’s actually relevant info even in the cropped picture that you posted.
-
@MiniChamp said:
You are not really answering the question.Yeah, that’s intentional. Incorrect suppositions are difficult to answer.
@MiniChamp said:
Clearly, if you think that this SAK is c.’76, it's because of some "things" that you see in the pictures. The question is: What are those mysterious things?Going through all the pics, I counted 19. But you only really need the one to prove the point. And two are the most relevant parts to this discussion. Both are visible in the crop you posted.
@MiniChamp said:
I'm never 100% certain about anything, but I do believe that the attached image shows a 2.7mm Victoria-era spring. If I'm wrong, then surely you have an appropriate post-Victoria-era SAK with a 2.4mm spring that looks like this one. Can you show images of such a SAK?You were pretty certain that the 84mm double cut file didn’t exist. This is like that. You’ve been looking at something you didn’t know existed. And are making all sorts of incorrect statements and assumptions about it.
And yes, I am able to show another knive that would prove the point just the same. But without explanation, it wouldn’t matter one bit.
@MiniChamp said:
Well, now you got me confused. Are you claiming that I'm wrong about this particular SAK having a 2.7mm Victoria-era spring or that SAKs with such springs were produced at least until 1976 (or both)?Now I expect you to get really confused. My answers to both questions above are ‘No’.
@MiniChamp said:
I'll be extremely happy if you will ever start providing some sort of evidence to support your claims. Until then I tend to consider them as being quite questionable.Lol. All there in the pics. Even in the crop you posted. Clear as daylight.
Found where we kinda discussed this before:
@MiniChamp said:
Hard to be certain, IMO. I do believe that transitions involving multiple parts tend to be relatively sharp. When they changed the thickness of the main blade shank from 2.7mm to 2.4mm, for example, this also involved changing the spring and the corresponding backside tool (corkscrew or Phillips SD). I think that you will never find a pre-3 variant of the backside Phillips SD on a SAK with a 2.4mm main blade shank, because they never made such variants that would fit. When a transition involves a single fully interchangeable part, however, the older parts tend to keep getting used in overlap with the new ones.There are actually two non-interchangeable types of variant 3 of the backside Phillips SD. The first appeared towards the end of the Victoria era and has a 2.7mm shank. I expect that it was used in some overlap with both variant 2b and variant 1b (because they were all interchangeable). The second has a 2.4mm shank and was introduced along with the corresponding main blades (this should be the only square backside Phillips SD that you will find along with these newer blades).
I happen to have a similar Grand-Prix. The only difference is that mine has the older big-gap scissors. I believe it to be from "around 1973." For me this essentially means 1972-1974. I tend to be skeptical about anyone's ability to date SAKs with an error margin of less than a year (except, maybe, a small number of very special cases). Nevertheless, I'm curious how you would date the two Victoria craftsmen in the attached image (sorry about the quality). I believe them to be from "around 1973" as well. Both have the same standard-gap scissors with a black spring. The only differences are as follows: The upper one has the can-key Phillips (variant 3) and a scraper on the cap-lifter. The lower one has a file on the Phillips (variant 1b) and no scraper on the cap-lifter.This is like the 84mm double cut file on the Philiips.
Basically, take everything you think you know, and just throw that out. Look at the auction pictures again. Pretty much prove everything you say in the above two posts to be flat out wrong. Or buy the knife and see for yourself.
-
Well my Elsener Zug or INOX Y D arrived today. I’m more than a little concerned that the Elsener Zug is engraved with a pen and not a stamp. If I had a keener eye I wouldn’t have bid on it. I’m hoping that someone can verify that Victorinox would have done this when they reconditioned the knife. The description on the auction said it was at Victorinox. Either that or the Zug retailer would have done that before the knife was sold. The INOX YD stamp looks legit as does the rest of the knife. The blades look reprofiled and reconditioned with a high polish. It’s smooth as glass open and closing, nickel silver liners and old looking scales. What’s everyone’s thoughts?

-
Another shot...

-
Here’s a shot of the stamp on the other side. This looks legit.

-
@kamakiri said:
I do think you’re right that it’s engraved. I have been under the assumption that it is ‘normal’. But I do not have many knives as such and in general prefer tangs stamped with dies like the INOXYD one.AFAIK, It’s all legit.
Thanks kamakiri. The inoxyd stamp is on the same knife so I think the blade is legit also. I also prefer stamped tangs. It does look like it was rebuilt professionally so it leads me to believe Victorinox did the work.
-
Hi Kamakiri! I think it would be great if you could share your dating of the tools, backsprings and back tools changes between 1973-1983. A lot of small changes have been made and you need to have a large number of samples for comparison. Not all of us have as many 1970s knives as you do, I'm sure. Well, especially for me, please, your opinion on awl dating in the period from 1973 to 1985. Many thanks!
-
@jnoxyd said:
Hi Kamakiri! I think it would be great if you could share your dating of the tools, backsprings and back tools changes between 1973-1983.Best thing I can say is that I’m working on it. :D
I don’t have anything planned specifically for backsprings though. I’ve avoided somewhat writing what was supposed to be the first chapter about my philosophy and methods...which really should go first, but perhaps easiest to write last.
I also don’t want to have the issue as ulli pointed out about updates. Lack of editing ability makes posts rather final.
There is also somewhat the issue of credibility. Like in the example of the “1973” knife for sale, would I really have to point out over a dozen things to ‘show’ that it’s c.’76? I can also just ‘prove’ it’s not ‘73 with as little as the tweezer. Seriously, would that be enough?

One chapter/topic I conceptualized would be titled “Stare ‘till it hurts”. It would only contain pictures and stipulated dates...nothing else. Like the catalogs, I’m not sure how many would appreciate the topic.
I just gotta figure out what I’ll post next. Or if I’m going to do a bit more on the catalogs with the Hoffritz ones.
@jnoxyd said:
A lot of small changes have been made and you need to have a large number of samples for comparison. Not all of us have as many 1970s knives as you do, I'm sure.Yes, nobody else is this <u>stupid</u>! ;)
Sad thing is that I’m not done. Like ulli said, there’s always something new to learn.
@jnoxyd said:
Well, especially for me, please, your opinion on awl dating in the period from 1973 to 1985. Many thanks!Don’t thank me yet! I posted about awls in my intro thread covering that timeframe. Albeit with some omission errors...and yes it needs updating and refinement. It’s planned for more detail as a separate thread/chapter in my ‘70s series.

-
@Sterg said:
Well my Elsener Zug or INOX Y D arrived today. I’m more than a little concerned that the Elsener Zug is engraved with a pen and not a stamp. If I had a keener eye I wouldn’t have bid on it. I’m hoping that someone can verify that Victorinox would have done this when they reconditioned the knife. The description on the auction said it was at Victorinox. Either that or the Zug retailer would have done that before the knife was sold. The INOX YD stamp looks legit as does the rest of the knife. The blades look reprofiled and reconditioned with a high polish. It’s smooth as glass open and closing, nickel silver liners and old looking scales. What’s everyone’s thoughts?Thats a really cool knife, you dont have to be concerned about it. I dont know any victorinox knife with a lacking front tang stamp. So your knife is factory made, or the knifemaker elsener zug assembled them and engraved the knives with his name. That was common those days. Value I would estimate $50-80 $.
Dübendorfer was a small company from Bassersdorf: "The purpose of the company is gravel and concrete deliveries, building material recycling, industrial waste disposal, dump service and transport, management of real estate, trade in miniatures. "
Had a history over 100 years, that ended in 2012.I have a similar knife, but instead of inoxyd it has a victoria switzerland stainless stamp on the back.

-
@ulli said:
Thats a really cool knife, you dont have to be concerned about it. I dont know any victorinox knife with a lacking front tang stamp. So your knife is factory made, or the knifemaker elsener zug assembled them and engraved the knives with his name. That was common those days. Value I would estimate $50-80 $.
Dübendorfer was a small company from Bassersdorf: "The purpose of the company is gravel and concrete deliveries, building material recycling, industrial waste disposal, dump service and transport, management of real estate, trade in miniatures. "
Had a history over 100 years, that ended in 2012.I have a similar knife, but instead of inoxyd it has a victoria switzerland stainless stamp on the back.
Thanks for that info ulli. I put $102 dollars on the auction not expecting to win. I won. So I overpaid a little. I don’t feel too bad because I like it. I’m just learning about SAKs so I’ll chalk it up as a lesson learned. You have some nice examples.
-
Ulli, what is this pattern? Officers or a bartender/waiter?
-
@Sterg said:
Thanks for that info ulli. I put $102 dollars on the auction not expecting to win. I won. So I overpaid a little. I don’t feel too bad because I like it. I’m just learning about SAKs so I’ll chalk it up as a lesson learned. You have some nice examples.I think you paid a fair price for a knife you like. I like it too and if I didn't have one that is similar, I would have likely paid the same.
Some folks on this forum have the luxury of being in the collecting arena so long they know how often a particular knife will come up for sale/bid.
Like you, I don't have all that time/knowledge experience so I have to go with what I like. Enjoy that one in good health.

-
@FolderBeholder said:
I think you paid a fair price for a knife you like. I like it too and if I didn't have one that is similar, I would have likely paid the same.
Some folks on this forum have the luxury of being in the collecting arena so long they know how often a particular knife will come up for sale/bid.
Like you, I don't have all that time/knowledge experience so I have to go with what I like. Enjoy that one in good health.

Thank you. The knife definitely has a quality feel about it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login