Vintage SAK Owners Club
-
@ulli said:
Thats a really cool knife, you dont have to be concerned about it. I dont know any victorinox knife with a lacking front tang stamp. So your knife is factory made, or the knifemaker elsener zug assembled them and engraved the knives with his name. That was common those days. Value I would estimate $50-80 $.
Dübendorfer was a small company from Bassersdorf: "The purpose of the company is gravel and concrete deliveries, building material recycling, industrial waste disposal, dump service and transport, management of real estate, trade in miniatures. "
Had a history over 100 years, that ended in 2012.I have a similar knife, but instead of inoxyd it has a victoria switzerland stainless stamp on the back.
Thanks for that info ulli. I put $102 dollars on the auction not expecting to win. I won. So I overpaid a little. I don’t feel too bad because I like it. I’m just learning about SAKs so I’ll chalk it up as a lesson learned. You have some nice examples.
-
Ulli, what is this pattern? Officers or a bartender/waiter?
-
@Sterg said:
Thanks for that info ulli. I put $102 dollars on the auction not expecting to win. I won. So I overpaid a little. I don’t feel too bad because I like it. I’m just learning about SAKs so I’ll chalk it up as a lesson learned. You have some nice examples.I think you paid a fair price for a knife you like. I like it too and if I didn't have one that is similar, I would have likely paid the same.
Some folks on this forum have the luxury of being in the collecting arena so long they know how often a particular knife will come up for sale/bid.
Like you, I don't have all that time/knowledge experience so I have to go with what I like. Enjoy that one in good health.

-
@FolderBeholder said:
I think you paid a fair price for a knife you like. I like it too and if I didn't have one that is similar, I would have likely paid the same.
Some folks on this forum have the luxury of being in the collecting arena so long they know how often a particular knife will come up for sale/bid.
Like you, I don't have all that time/knowledge experience so I have to go with what I like. Enjoy that one in good health.

Thank you. The knife definitely has a quality feel about it.
-
Not really sure this would help regarding the “1973” knife, but the attached pic has a comparison against two knives that are between ‘73 and ‘76. One is closer to ‘73 and the other, of course, closer to ‘76.

-
More comparison...Two Grands Prix variants one ‘73 and the other c.’74.

-
Okay...I guess the tang size and comparison doesn’t convince. 
@kamakiri said:
I can also just ‘prove’ it’s not ‘73 with as little as the tweezer. Seriously, would that be enough?
Perhaps the tweezer might. They change in between the dates in question.
The knife in question has the latter style and the scale to fit it. Makes sense?




-
So I’m guessing that the silence equals acceptance regarding the “1973” knife? The tweezer was enough proof?

Is there anyone who sees what I mean about one of the 2.7mm parts running out from the blade layer? Lots of views, but no comments.
I understand that the blade layer change alone doesn’t prove that the knife isn’t ‘73 or c.’73. But there are other tools and more importantly what I call ‘construction’ that makes the knife later. And the knife in question does not have the same construction in both parts and protocol for other Champion knives that are ‘74 and well into ‘75. So from both parts and construction/assembly the knife can not be ‘73 or c.’73.
To me, it seems to fit with Victorinox needing to take the time to figure out how or that they want to use the rest of the remaining 2.7mm parts. The solution is not unlike how knives were built when the ‘bird head’ spacers were thicker than 1mm ones used since the ‘60s.
-
Closer comparison might help see the thickness difference?

This time with the blades open. “1973” knife is on the top in both crops.


-
Not my knife, but I think a good example of a knife that I can say 100% is c.‘73 production.






-
@kamakiri said:
Not my knife, but I think a good example of a knife that I can say 100% is c.‘73 production.

Any guesses on the part that actually gives me the highest confidence regarding Chronology? And no, it’s not the clip point. That’s my only hint. These pictures are surprisingly good in that respect. Normally, I would need the knife in hand to see the needed details.
-
Obviously, 1973 was the only year they made half scissors as a cost cutting measure

-
I fail to see how a half scissors can be a cutting measure

-
Not my knife, but this is an example of another clip point that is certainly not c.’73
Notice that it doesn’t have a ‘Victoria era’ backspring like noted previously in the thread.
Note the VSSR/OS tang stamps.
I hope this is clear enough proof of what I’ve been saying.



-
Are this:

Vintage enought ?
Cheers!
Marcelo from Argentina
-
Hello everyone! I found that I also have a few 1970s Champions, even with whole scissors. I thought it would be interesting to list the tool changes you know and the approximate dates. In the pictures there are two champions pre 1973, two 1973-1974 (I believe, but you can correct me) and last two from c.1974 and late 1970s.





Here is my list of changes we can see on knives above, correct and add it please!- Let's list well known 1973 changes together:
- introduction of a magnifying glass and phillips
-scissors now without LNF and, accordingly, on the opposite side of the main blade
-a new kind of metal saw / file plus a small flat screwdriver on its back
-ruler on hook extractor - introduction of a corkscrew with 4 turns
-reduction of the thickness of the main blade from 2.7 to 2.4mm
-changing the type of spring of blades - missing Victoria Officier's Suisse crossbow stamp
- introduction of clip point small blade
- Scissors model 1952 with a single spring - until 1973
- Transit scissors (late 1960s) with long groove, double spring, blunt ends - until 1973 or 1974?
- Scissors with short groove, double spring, small spring attachment hole and screw, blunt ends 1973(?) - 1974(?)
- Scissors with double thinner spring, large spring hole and screw, sharp ends 1975-1991
- Thick liner between metal saw and wood saw - since ?
- Additional full liner without cutouts (see Champion on the right) - since ?
- Notch at the end of the metal saw/wood saw spring 1979?
- Changing the shape of the wood saw end - 1979?
- Blank main blade stamp- 1973-1974?
- Officier's Suisse crossbow stamp - since 1974 or 1975?
-
Wow - what a collection!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
