Daredevil Challenge 2021
-
@ReamerPunch said:
Have you seen their other multi-tool?
/topic/77520
https://www.youtube.com/watch?v=9qNi_97asM0No, I haven't, but this just looks a passable OEM tool.
@SurgeUk said:
I'm going to stick with the OHT. I know it's LM and therefore "should" be good
The problem, IMO, is that I find the blades very short and it's too bulky (compared to my Surge)

I'm going to sneak it in to work (instead of my OG Surge) and see how it actually stands up operationally

The fact is I've had it since it was released here in the UK but I've never got on with it
Let's see how it pans out :-\
I think a lot of folks here are in the same shoe as you do. Often time it is not necessarily the tool that's bad, but either preconception/bias that prevent the tool being used and loved.
-
I am getting a head start on the challenge:

*The Toozall is an addition to my electrician's MT collection that came in yesterday at my place of work. *
I pulled the TripSaver out of storage last night and carried it with me today. I have used it some today. I already miss my Super Tool :'(

-
I have the feeling that this https://www.amazon.com/Swiss-Tech-Multitool-Multi-Tool-Screwdriver/dp/B08DHWHZFZ is going to feel a lot like this https://www.youtube.com/watch?v=5NbvmN5loJ8
Except that it's for a month.
-
You guys are nuts.

-
And proud of it. :D
-
@Fireman said:
I have the feeling that this https://www.amazon.com/Swiss-Tech-Multitool-Multi-Tool-Screwdriver/dp/B08DHWHZFZ is going to feel a lot like this https://www.youtube.com/watch?v=5NbvmN5loJ8Except that it's for a month.
Good song!
Have you seen this review? - https://youtu.be/WFU9Wuq_5TQ
-
Here is a review of the TripSaver: /post/2267446
Perhaps I will grow to like it more after using it for a month.
-
@Adam5 said:
Here is a review of the TripSaver: /post/2267446Perhaps I will grow to like it more after using it for a month.
I've owned a few variations of that tools (plain needlenose, CAT branded blunt nose, and Malaysian National Police with strap cutter and tanto blade) and I view it as a nice design, just poorly executed with poor materials and workmanship. The interesting thing is that the Malaysian Police tool was never done as intended. The contract was cancelled AFTER Utica produced the entire run, and they've ended up in various places. My four Multimasters were sold together as a lot for like $20; as factory overruns. I feel that if the finish were upped, the blades actually sharp (which I don't mind, but that belt cutter is a PITA to even try to sharpen) and the pliers made from something other than steel "with a hardness in the hard cheeses category" it would be a good tool. It's pretty much the oldest multiool design still in production in its basic form. It's built like a tank, and you can't kill them. I am going to try to find a 1980s or 1990s made example, and hopefully, it will be better made.
-
I was thinking about backing out of this challenge due to there being too many awesome tools and too little time to spend a month using something I don’t like.
But then I decide to stick with it. I had three candidates -
- Victorinox Evo S18 - As much as I love SAKs of all sizes, I can’t stand the ergonomic grips on the Evo line. I also find the locking mechanism uncomfortable and awkward.
- Leatherman Squirt PS4 - I really wanted to like this little tool and would if I didn’t find the two drivers nearly impossible to open. The nail nicks seem to be so shallow, small and close to the scales that I find they do not work.
- Kutmaster Minimaster - I do not like having to open it to access any tool. I also do not like that with just about any tool you try to open, all the tools want to come open. Also, I’m not sure why but I just feel the quality may be a little suspect, which irritates me due to how much I like my old Utica knives.
After some deliberation, I’ve decided on the Minimaster. I feel that maybe I haven’t given the Minimaster a fair chance compared to other tools by bigger names.

-
I love nuts! :D
@Adam5 said:
A little cursing, some loss of skin and blood. It will be fun
That's the spirit! >:D
@Sos24 said:
I was thinking about backing out of this challenge due to there being too many awesome tools and too little time to spend a month using something I don’t like.But then I decide to stick with it. I had three candidates -
- Victorinox Evo S18 - As much as I love SAKs of all sizes, I can’t stand the ergonomic grips on the Evo line. I also find the locking mechanism uncomfortable and awkward.
- Leatherman Squirt PS4 - I really wanted to like this little tool and would if I didn’t find the two drivers nearly impossible to open. The nail nicks seem to be so shallow, small and close to the scales that I find they do not work.
- Kutmaster Minimaster - I do not like having to open it to access any tool. I also do not like that with just about any tool you try to open, all the tools want to come open. Also, I’m not sure why but I just feel the quality may be a little suspect, which irritates me due to how much I like my old Utica knives.
After some deliberation, I’ve decided on the Minimaster. I feel that maybe I haven’t given the Minimaster a fair chance compared to other tools by bigger names.

Thanks for stepping up to this challenge, part of the fun is to dig deep for find some ingenuity for creative use, and make the most out of any situation that would come our way.

-
@Fireman said:
That's awful pricey for half a Leatherman.

I'll be watching, though, because it might be...something I need...

The prices have gone up a lot, but when I got mine it was about $20-$25. Also, there are a couple versions with the made in China ones being the cheapest and sometimes available for less than $10.
-
So I probably should have asked before entering...
Is modding a less-than-liked tool to make it more likable OK for the challenge?
One of the love/hate things about the S557 is I like having a nail file, but miss having a small knife blade.
So I used the tips in Felix Immler's YouTube video "The Hook Blade Trick - Swiss Army Knife modification - Victorinox custom & maintenance (20/25)" to grind a hook blade into the can opener.
So now I have a sort-of second blade, good for ripping open boxes and plastic clamshell packaging at least.

-
I unloaded my Wingman, so I'm going to go with the Bond. I definitely haven't fallen for it.
-
Some people are choosing premium tools that they just never got used to and others are going to try to get by with Junque. I see the latter as being the more difficult challenge. I'm suggesting that this challenge needs an escape clause. If a tool is so irredeemable that it just can't be used then we shouldn't force the user to continue with it, as that would be cruel. After all, knowing a tool is really that bad is still useful information. However, there would need to be some sort of penalty to make up for changing carries mid-challenge. Perhaps requiring the user to continue to take their daily picture with the terrible tool, but pictured along with the tool they are using in its place, and explaining each day why the one is better than the other for a particular use.
It's either that, or forty lashes with a wet noodle. -
Day 1
John-Benzen Tools, Div of Chicago Tools HBMT. Well it’s supposed to be Daredevil so here goes

Day 1, Coco’s take…what’s that?

Hahaha classic, you idiot


-
@Sos24 said:
The prices have gone up a lot, but when I got mine it was about $20-$25. Also, there are a couple versions with the made in China ones being the cheapest and sometimes available for less than $10.I got mine around the time Armstrong Tools went out of business, as a seller had several Utica-made knives and multitools Armstrong had sold under their name (and etched "ARMSTRONG" where Utica would normally be stamped). If I recall, I paid $15.
-
Day 1
I used the saw to shorten a Bic pen even further. I wanted another cm off, to make it flush with the rest of my keychain items.
The saw did an average job. This pen was originally shortened from full length with the Roxon Storm. That saw was nice. Much more aggressive than the Flik's saw. The Flik took longer, and it kept binding, and in the end I cracked the plastic.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login