Daredevil Challenge 2021
-
-
-
@Echotech said:
Thanks Fireman

I spoil her rotten anyway :D but she’ll be getting lots of extra attention that’s for sure.
Here’s her earlier in the week, be glad to have her back to her stick chewing self


I maybe a day late, but do hope Coco is back to her usual self by now.


A nothing sort of day where I spent several hours trying to get one of our baggage x-ray machines going ::)
I seemed to prevail and needed something to test it on; step forward the OHT

Looks like the OHT may have a life in modeling, who would have guessed that...
:D -
-
No use at all today. :(
Went to an estate sale this morning, but no SAKs. Just some cheap Chinese multi-tools. (Too bad the sale wasn't last month. I would have been set for the challenge!) The house was a hoarder's house. It was...interesting.
Spent the afternoon watering the parched lawns. They aren't liking the near 100 degree temps. The S557 was no help with that.
So just a photo of the S557 posed with some other members of my collection. See if you can identify them!
Champion c, Bijou (2), Classic SD (5), Cavalier, Mini Champ (2nd gen.) Plus (mod), Swiss Champ (2), Explorer (2), Deluxe Tinker, Climber, Pioneer Alox, Bantam, Delemont Evolution S557, Wenger Serrated Commander, Huntsman, Serrated Spartan/Weekender, Executive, Explorer Plus, Deluxe Explorer Plus (mod), Wenger Traveler
I will give it a try...from left to right:
Deluxe Tinker, Explorer, Deluxe Explorer Plus (mod), Champion C, Swisschamp, MiniChamp?@ReamerPunch said:
Day 13I had a piece of wire on my bowdrill, to keep the spindle in place, when getting into position. But it was a little loose and it bothered me. I removed it with the pliers, and put a screw in place. Nice and firm, no rattling, and I can remove it easily if I want to. The Phillips bit nicely into the screw and drove it with no issue, other than subpar ergonomics.

Any success in the friction fire? I have watched enough survival show and did a few practices myself, and am fully convinced I really, really ought to carry some form of ignition device whenever going outdoor. There are just too many factors in making the friction fire that it is best kept as a backyard project, instead of me trying to count on it(or myself).
-

Glad to see Coco seems to be doing a little better. This pot is pretty scary, perfect for halloween!
@Sos24 said:
Day12
The Minimaster helped with putting a split ring on a flashlight.

It then cut open a snack

Is this new or the Rovyvon repainted?

@Fireman said:
Daredevil Day 13: Sunrise at the beach. 8)
Beautiful settings!

My grandson didn't have much good to say about the saw either. He wanted the Super Tool




I foresee a future MTOer in this one, so cute and smart too! 
-
@Humayd A R Mahomedy said:
Day 13
20210813_141502 by Humayd a r Mahomedy, on Flickr
i got this SRK from a buddy who decided to pull off the handle and glue it back on with "sticks like smurf". he used a fastener in the lanyard hole.
this arrangement bugged me until i decided to use a tube to line the lanyard hole.
pictured is my 3rd or 4th attempt,i keep cracking the tube when i try to flare it.
20210813_141748 by Humayd a r Mahomedy, on Flickr
the Swisstool worked,i was a bit concerned about the "hybrid" pliers,but it did what was needed just fine.
20210813_142452 by Humayd a r Mahomedy, on Flickr
i used a thin-walled stainless tube,this side is passable.
20210813_142456 by Humayd a r Mahomedy, on Flickr
this side is fudged.
back to the drawing board
20210813_164545 by Humayd a r Mahomedy, on Flickr
i used the serrated blade to open a bag of cat food,it zipped throughThird picture from top, it was so close! You are almost there, keep up the great work!
@SurgeUk said:
Is it acceptable to whip out your tool and display it on the dash for awl to see

Ever since you mentioned the 'lewd' comment in a previous post, I can't shake it and just curious anyone else read this comment funny like me?

-
Day 13.
Phone was dead, so here are recreations of what I recently had to do.
Tightened the clip screws on my work knife, a rather tattered Japanese-made Cold Steel Voyager L. Unlike most of my tactical knives, it's fully pinned, except for the clip (Phillips) and thumb stud (slotted).

It was Friday the 13th, so something had to go wrong.
We have two tractors on the farm, a 1996 John Deere MFWD, and a 2017 Deere 3038E 4x4. The 3038E needed to be moved to do some work on the 5400 (both tractors are in the same run-in shed double-parked. Well, I couldn't get the key in. We have no idea how, but the ignition cylinder became damaged somehow between now and when it was last used (about a week ago). I didn't want to force it, and it would not go all the way in. I tried starting it with the key half-out, and it just twisted. Granddad used often an old key that he had bent/twisted repeatedly before (I suspect it may have played a part in how the cylinder became damaged). I ran a flashlight down the cylinder, and noticed it appeared to mostly be plastic--I said to myself "Figures"; and called the Kubota dealer, who confirmed my suspicion. Given it's a Deere, it's gonna be expensive to fix. Should've gone with the Kubota or Massey Ferguson.....
Backstory on why I called the Kubota, and not Deere dealer. We run two Deere tractors, a Deere riding mower, and a Kubota RTV900 UTV. Both dealerships originated as family-run sometime around the 1950s, with the Kubota dealership originating as Allis Chalmers prior to Deutz's buyout of AC; after which they switched to Kubota. The Kubota/Bobcat dealer remains family-run to this date. The John Deere dealership was bought out by Meade Tractor, which was formed out of a Tennesee businessman having purchased nearly all the John Deere dealers in Kentucky, Southwestern Virginia, West Virginia, and Tennesee. We had two dealerships here--one each (one in WV, one in VA; latter of which was the original dealership). Meade Tractor bought our Deere dealer in 2015. They closed the original dealership in VA (if you will watch the 1990s remake of Lassie, it's in there; as are several places I'm familiar with--one scene was filmed at one of the neighbors), retaining the newer one built in WV in the 1990s. There are only two employees who are original to the company. The sales manager was originally the owner of that dealership. The service department has like one guy that was there during the Conn era, and I have to deal with automated systems and quite honestly, rude staff. So, when something breaks, usually I call the Kubota dealer
I had to straighten the key, and didn't have pliers on me. So, I stuck the key through the opening holes on the (closed)
capliftercan opener (it's different than that of an SAK) and blade (which line up) and turned the key opposite the direction of the twist. Can't do that with an SAK!
-
-
-
<u>Fri- DAY 13</u> :ahhh :ahhh :ahhh
Stuck in meetings most of the day so no real use ::)
I did get a new Warrant card holder* My old one had worn out (only been 2 months
)*Badge Holder (if you're across the various ponds
)
-
@comis said:
I foresee a future MTOer in this one, so cute and smart too! 
He has been enamoured with tools since before he could talk. I hope that the interest never leaves him.
Here is an account of one of the funniest things that has ever happened to me:
As a bit of background, my wife and I have helped raise the grandkids, starting from birth with my grandson. Whenever he would try to get hold of something he should not have, we would say "no, no, no" and take it away from him.
Christmas 2019. My wife and I stopped by our daughter's house so that I could put together some toys that the grandkids had received. One of the toys had a few screws that needed to be installed, so I pulled out my new Klein hybrid plier multi tool (not the MT I am carrying for this challenge). My grandson sees the MT, tells me "no, no, no", and proceeds to take the MT away from me. I was completely helpless from laughter

-
@comis said:
Champion c, Bijou (2), Classic SD (5), Cavalier, Mini Champ (2nd gen.) Plus (mod), Swiss Champ (2), Explorer (2), Deluxe Tinker, Climber, Pioneer Alox, Bantam, Delemont Evolution S557, Wenger Serrated Commander, Huntsman, Serrated Spartan/Weekender, Executive, Explorer Plus, Deluxe Explorer Plus (mod), Wenger TravelerI will give it a try...from left to right:
Deluxe Tinker, Explorer, Deluxe Explorer Plus (mod), Champion C, Swisschamp, MiniChamp?You are correct, comis!
Yes, I realized after I posted the photo that I gave the multiple-choice answers in my signature.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



Oh, wait... ::)


