Showcase: Mods to plier-based multitools
-
I removed all tools and instead inserted a solid steel block on one side, which fitted and screwed exactly into the handle and is additionally riveted with two pins. A quarter inch insert is pinned into the block. With it I can use quarter inch sockets and, with a bit holder, all common screwdriver bits. The axial load limit is now no longer with the axis of the folding tools, but with the torsional stiffness of the pliers handle into which the steel block is inserted.



-
In the other pliers handle I inserted a Bosch system jigsaw blade holder I designed myself. It consists of an M-10 bolt that has been drilled out to 6.3 mm. An M-10 cap nut was modified accordingly to clamp the saw blade in place. This means that all available saw blade types can now be used in the tool. It is not difficult to grind a file blade so that it can be accommodated by the jigsaw blade holder. Then files can also be used.

-
I carry the tool in a belt pouch, along with a selection of bits, a quarter inch bit holder as well as several saw blades and files. With it I can do all the work that can be done by using a conventional multitool. But mine is much more sturdy in comparison. OK, the complete set in the belt pouch weighs around 450 grams - the „toys“ are of course more comfortable to edc! :D


-
Interesting modifications. What are the red and yellow "flags" on the belt pouch? 450 grams (16 ounces) is too heavy for me. :(
-
@parnass said:
Interesting modifications. What are the red and yellow "flags" on the belt pouch? 450 grams (16 ounces) is too heavy for me. :(Yes, I'm not happy with the weight too. Gonna do an improved version one day. But the problem is, when you want it to be ultra strong, you seem to always end up with quite a heavy load on your belt.
The yellow and red "flags" are saw blades covered in electrical tape. To prevent the saw teeth from damaging the cordura and to distinguish metal- from wood-blades.
Merry Christmas to you
-
Merry Christmas! Thanks for posting this nice mod case study which will last you longer than you want it to by the looks of it

-
A very interesting mod
Good idea and you are heading in a good direction with it, just needs a bit of refinement and something to lighten it up a bit

-
Whenver I carry the tool, I never move near water - if I fall into it, the weight will inevitably pull me down. ;)
Joking aside, there is a fine line to walk between stability and weight. Most of the factory-made tools I had in my hand so far in my opinion weren't resilient enough. Hand on heart: How often have you wanted to loosen a stuck screw and stopped trying for fear of damaging the good tool? The ideal multitool should be just as resilient as a "real" tool, shouldn't it?
-
Cool mod derheim !

-
@derheimwerkerkoenig said:
Whenver I carry the tool, I never move near water - if I fall into it, the weight will inevitably pull me down. ;)Joking aside, there is a fine line to walk between stability and weight. Most of the factory-made tools I had in my hand so far in my opinion weren't resilient enough. Hand on heart: How often have you wanted to loosen a stuck screw and stopped trying for fear of damaging the good tool? The ideal multitool should be just as resilient as a "real" tool, shouldn't it?
Yes they should
but I am the guy who breaks 15/16 inch wrenches
:D -
If titanium wasn't so expensive, it could be used more widely to save weight when manufacturing parts of a multitool.
-
-
@m47mu74nt said:
And used "wisely" : LM Charge TTi has ... Titanium, but is heavier that the Wave, for no added (relevant) feature
(But it is a cool tool, and that alone is enough)The original TTI is lighter than the Wave, not sure about the newer one.
[attach id=0 msg=2308536]
[attach id=1 msg=2308536]


-
[attach id=0 msg=2308537]
[attach id=1 msg=2308537]


-
I should not have made general case of the specific

nevermind, here are mine :Charge XTi from 2004 (I don't have the original Ti) : 228g/8.04oz
Charge + TTi from 2019 : 251g/8.85oz (replaceable wire cutters AND steel washers used instead of Ti cast may increase weight)
New Wave from 2013 : 244g/8.61gI have noticed that the metal spring piece that locks blades shot where using pliers and helps closing the pliers head when folding the MT changed quite a lot other the years and it may well be one of the the cause of weight increase
That, and the changes in build process for the charge (I am looking for an early "new design" Charge, but I think that the transition from cast titanium to steel washers is very recent)We may make a dedicated thread for this ?



-
@m47mu74nt said:
I should not have made general case of the specific
nevermind, here are mine :Charge XTi from 2004 (I don't have the original Ti) : 228g/8.04oz
Charge + TTi from 2019 : 251g/8.85oz (replaceable wire cutters AND steel washers used instead of Ti cast may increase weight)
New Wave from 2013 : 244g/8.61gI have noticed that the metal spring piece that locks blades shot where using pliers and helps closing the pliers head when folding the MT changed quite a lot other the years and it may well be one of the the cause of weight increase
That, and the changes in build process for the charge (I am looking for an early "new design" Charge, but I think that the transition from cast titanium to steel washers is very recent)We may make a dedicated thread for this ?
Sure, go for it. I would put it in the Leatherman forum

-
@m47mu74nt said:
here it is :)
/post/2308867what are the manufacturing years of your Wave and Charge TTi please?
TTi is 0807 1107 236g/8.25oz Wave is 0617 0917 242g/8.47oz Charge+ 1018 238g/8.40oz BO Wave 1213 244g/8.61oz
Original Wave 0699 223g/7.87oz
-
thx !
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login