Showcase: Mods to plier-based multitools
-
@derheimwerkerkoenig said:
Whenver I carry the tool, I never move near water - if I fall into it, the weight will inevitably pull me down. ;)Joking aside, there is a fine line to walk between stability and weight. Most of the factory-made tools I had in my hand so far in my opinion weren't resilient enough. Hand on heart: How often have you wanted to loosen a stuck screw and stopped trying for fear of damaging the good tool? The ideal multitool should be just as resilient as a "real" tool, shouldn't it?
Yes they should
but I am the guy who breaks 15/16 inch wrenches
:D -
If titanium wasn't so expensive, it could be used more widely to save weight when manufacturing parts of a multitool.
-
-
@m47mu74nt said:
And used "wisely" : LM Charge TTi has ... Titanium, but is heavier that the Wave, for no added (relevant) feature
(But it is a cool tool, and that alone is enough)The original TTI is lighter than the Wave, not sure about the newer one.
[attach id=0 msg=2308536]
[attach id=1 msg=2308536]


-
[attach id=0 msg=2308537]
[attach id=1 msg=2308537]


-
I should not have made general case of the specific

nevermind, here are mine :Charge XTi from 2004 (I don't have the original Ti) : 228g/8.04oz
Charge + TTi from 2019 : 251g/8.85oz (replaceable wire cutters AND steel washers used instead of Ti cast may increase weight)
New Wave from 2013 : 244g/8.61gI have noticed that the metal spring piece that locks blades shot where using pliers and helps closing the pliers head when folding the MT changed quite a lot other the years and it may well be one of the the cause of weight increase
That, and the changes in build process for the charge (I am looking for an early "new design" Charge, but I think that the transition from cast titanium to steel washers is very recent)We may make a dedicated thread for this ?



-
@m47mu74nt said:
I should not have made general case of the specific
nevermind, here are mine :Charge XTi from 2004 (I don't have the original Ti) : 228g/8.04oz
Charge + TTi from 2019 : 251g/8.85oz (replaceable wire cutters AND steel washers used instead of Ti cast may increase weight)
New Wave from 2013 : 244g/8.61gI have noticed that the metal spring piece that locks blades shot where using pliers and helps closing the pliers head when folding the MT changed quite a lot other the years and it may well be one of the the cause of weight increase
That, and the changes in build process for the charge (I am looking for an early "new design" Charge, but I think that the transition from cast titanium to steel washers is very recent)We may make a dedicated thread for this ?
Sure, go for it. I would put it in the Leatherman forum

-
@m47mu74nt said:
here it is :)
/post/2308867what are the manufacturing years of your Wave and Charge TTi please?
TTi is 0807 1107 236g/8.25oz Wave is 0617 0917 242g/8.47oz Charge+ 1018 238g/8.40oz BO Wave 1213 244g/8.61oz
Original Wave 0699 223g/7.87oz
-
thx !
-
For work everyday I carry the Leatherman Surge. The tools I use the most are pliers, screwdrivers, knife, awl and scissors. The big selling factor between the Wave and the Surge to me was the blade exchanger. But in reality I was barely ever using it. So after seeing thousands of mods you all have done so well I bought the cheapest scalpel handle with included blades off ebay for around $5. I traced the out line of the t shank removable saw and began grinding the handle of the scalpel into the t shank shape. Surprisingly those scalpel handles are very hard metal. The handle had to be thinned as well until finally the whole thing fit into the blade exchanger snugly with basically no movement. The end result is still a bit rough but it works great. In the future I plan to replace one of the outside blades with a screwdriver so I will not have that many redundant blades.
I believe the blade exchanger has a mountain of largely untapped possibilities. For now I am enjoying a mod I use all the time.
-
I think I already said it (maybe not) but it looks quite cool

-
Tool Name: Leatherman Hiker
Basis: Leatherman Charge TTi
Aim: Lightweight hiking companion with all the essential implements that I need, and nothing that I don't need.
Mods: Removed the plier head and everything else except:-- S30V straight edge blade
- Saw
- Scissors
- Bit exchanger (with flat head/phillips bit attached)
- Pocket clip.
Total weight 97grams.

-
Looks really good, may I steal your idea?

-
@m47mu74nt said:
Looks really good, may I steal your idea?
Sure, thanks! This mod is inspired by Maxlvledc who should take the credit. https://youtu.be/COZCQdfvK5g. Not exactly the same mod but similar. I happen to have a spare TTi which I rarely use these days so decided to carry out this mod after watching his vid. It is a straight forward mod which is completely reversible. I am very happy with how it turned out.
-
thks :)
What did you use as a spacer on the "head" side? -
@m47mu74nt said:
thks :)
What did you use as a spacer on the "head" side?The frame is strong enough and no spacer required. I just removed the plier head, reinstalled the blade and saw and everything locks into place. It is a very straight forward mod. I like this mod as it allows me to pick & choose the implements I like and it is completely reversible.
PS. can someone please show me how to upload photos, my photos keep appearing twice on my post.

-
@roamingcat said:
Sure, thanks! This mod is inspired by Maxlvledc who should take the credit. Not exactly the same mod but similar. I happen to have a spare TTi which I rarely use these days so decided to carry out this mod after watching his vid. It is a straight forward mod which is completely reversible. I am very happy with how it turned out.Great mod, roamingcat
I love the half tools and love seeing them but Maxlvledc actually got his idea from MTO because this mod was being done by other members when he was first a member here ;) and perhaps before he was a member
He mostly always forgets to credit MTO for his info and ideas 
I have this one from November 2018 ( I think someone had done before me but I forget who)


and my most recent iteration of it


-
Thanks Poncho for this information
. Good to know and
MTO is a wealth of information and great ideas thats why I keep coming back! Your mod looks really good and your photoshot just as good
. I see you also opted for the blade+scissors+bit exchanger combo
. I was undecided about the saw or the file but for the purpose of my hiking trails went with the saw. But I know I can easily swap for the file or serrated hook anytime should the need arises.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login