Showcase: Mods to plier-based multitools
-
Interesting modifications. What are the red and yellow "flags" on the belt pouch? 450 grams (16 ounces) is too heavy for me. :(
-
@parnass said:
Interesting modifications. What are the red and yellow "flags" on the belt pouch? 450 grams (16 ounces) is too heavy for me. :(Yes, I'm not happy with the weight too. Gonna do an improved version one day. But the problem is, when you want it to be ultra strong, you seem to always end up with quite a heavy load on your belt.
The yellow and red "flags" are saw blades covered in electrical tape. To prevent the saw teeth from damaging the cordura and to distinguish metal- from wood-blades.
Merry Christmas to you
-
Merry Christmas! Thanks for posting this nice mod case study which will last you longer than you want it to by the looks of it

-
A very interesting mod
Good idea and you are heading in a good direction with it, just needs a bit of refinement and something to lighten it up a bit

-
Whenver I carry the tool, I never move near water - if I fall into it, the weight will inevitably pull me down. ;)
Joking aside, there is a fine line to walk between stability and weight. Most of the factory-made tools I had in my hand so far in my opinion weren't resilient enough. Hand on heart: How often have you wanted to loosen a stuck screw and stopped trying for fear of damaging the good tool? The ideal multitool should be just as resilient as a "real" tool, shouldn't it?
-
Cool mod derheim !

-
@derheimwerkerkoenig said:
Whenver I carry the tool, I never move near water - if I fall into it, the weight will inevitably pull me down. ;)Joking aside, there is a fine line to walk between stability and weight. Most of the factory-made tools I had in my hand so far in my opinion weren't resilient enough. Hand on heart: How often have you wanted to loosen a stuck screw and stopped trying for fear of damaging the good tool? The ideal multitool should be just as resilient as a "real" tool, shouldn't it?
Yes they should
but I am the guy who breaks 15/16 inch wrenches
:D -
If titanium wasn't so expensive, it could be used more widely to save weight when manufacturing parts of a multitool.
-
-
@m47mu74nt said:
And used "wisely" : LM Charge TTi has ... Titanium, but is heavier that the Wave, for no added (relevant) feature
(But it is a cool tool, and that alone is enough)The original TTI is lighter than the Wave, not sure about the newer one.
[attach id=0 msg=2308536]
[attach id=1 msg=2308536]


-
[attach id=0 msg=2308537]
[attach id=1 msg=2308537]


-
I should not have made general case of the specific

nevermind, here are mine :Charge XTi from 2004 (I don't have the original Ti) : 228g/8.04oz
Charge + TTi from 2019 : 251g/8.85oz (replaceable wire cutters AND steel washers used instead of Ti cast may increase weight)
New Wave from 2013 : 244g/8.61gI have noticed that the metal spring piece that locks blades shot where using pliers and helps closing the pliers head when folding the MT changed quite a lot other the years and it may well be one of the the cause of weight increase
That, and the changes in build process for the charge (I am looking for an early "new design" Charge, but I think that the transition from cast titanium to steel washers is very recent)We may make a dedicated thread for this ?



-
@m47mu74nt said:
I should not have made general case of the specific
nevermind, here are mine :Charge XTi from 2004 (I don't have the original Ti) : 228g/8.04oz
Charge + TTi from 2019 : 251g/8.85oz (replaceable wire cutters AND steel washers used instead of Ti cast may increase weight)
New Wave from 2013 : 244g/8.61gI have noticed that the metal spring piece that locks blades shot where using pliers and helps closing the pliers head when folding the MT changed quite a lot other the years and it may well be one of the the cause of weight increase
That, and the changes in build process for the charge (I am looking for an early "new design" Charge, but I think that the transition from cast titanium to steel washers is very recent)We may make a dedicated thread for this ?
Sure, go for it. I would put it in the Leatherman forum

-
@m47mu74nt said:
here it is :)
/post/2308867what are the manufacturing years of your Wave and Charge TTi please?
TTi is 0807 1107 236g/8.25oz Wave is 0617 0917 242g/8.47oz Charge+ 1018 238g/8.40oz BO Wave 1213 244g/8.61oz
Original Wave 0699 223g/7.87oz
-
thx !
-
For work everyday I carry the Leatherman Surge. The tools I use the most are pliers, screwdrivers, knife, awl and scissors. The big selling factor between the Wave and the Surge to me was the blade exchanger. But in reality I was barely ever using it. So after seeing thousands of mods you all have done so well I bought the cheapest scalpel handle with included blades off ebay for around $5. I traced the out line of the t shank removable saw and began grinding the handle of the scalpel into the t shank shape. Surprisingly those scalpel handles are very hard metal. The handle had to be thinned as well until finally the whole thing fit into the blade exchanger snugly with basically no movement. The end result is still a bit rough but it works great. In the future I plan to replace one of the outside blades with a screwdriver so I will not have that many redundant blades.
I believe the blade exchanger has a mountain of largely untapped possibilities. For now I am enjoying a mod I use all the time.
-
I think I already said it (maybe not) but it looks quite cool

-
Tool Name: Leatherman Hiker
Basis: Leatherman Charge TTi
Aim: Lightweight hiking companion with all the essential implements that I need, and nothing that I don't need.
Mods: Removed the plier head and everything else except:-- S30V straight edge blade
- Saw
- Scissors
- Bit exchanger (with flat head/phillips bit attached)
- Pocket clip.
Total weight 97grams.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login