Corkscrew or Philips Head
-
WOW cannot believe I didn't vote
. In years past I preferred the phillips hands down. The problem with feeling that way was my most carried SAK was Explorer. I also was carrying a Swisschamp. I'm not sure why my thinking was not in line with what I carried
.I appreciated the phillips but my vote now aligns with what I have always carried.

Corkscrew.
-
Seems like it always happens that if I’m carrying a corkscrew SAK I run into recessed Phillips screws all day. And if I have a Tinker in my pocket I will find 17 things the corkscrew would be pretty helpful for.
:ahhh 
-
@RustandToil said:
The corkscrew is useful for storage and, for me, the tiny screwdriver that sits inside is useful - however I have modified a small bit to slot into my Super Tinker and it works great. I'd like to post about it on the forum just not sure where yet.I'd really like to see what you did, if you don't mind.
-
Perhaps this is the answer! ;0)
Both and with slightly less torque issues with the Phillips toward the middle too.
Still prefer the inline though!
Which, for me, means corkscrew on the back given the choice of only one.

-
@marlowe221 said:
Seems like it always happens that if I’m carrying a corkscrew SAK I run into recessed Phillips screws all day. And if I have a Tinker in my pocket I will find 17 things the corkscrew would be pretty helpful for.
:ahhh 

-
@Jazz said:
I'd really like to see what you did, if you don't mind.I've just posted a video here: https://youtu.be/M7nVKMzYzyM but once I get back at my laptop I'll add a thread in the Mods section with some photos. Very basic but I've found it really useful!
-
I prefer the look and feel of the Phillips, especially when whittling with the small blade. I’ve come around to appreciating the versatility of the corkscrew-mini driver combination, but I don’t prefer it over the Phillips driver, even in SAKs with an inline Phillips.
-
Wow nearly 2:1 in favour of the corkscrew - Woo Hoo - Usually I thought this vote was closer!!
How about the Explorer or the 111mm Outrider - Both still only four layers, but get Phillips and corkscrew
PS. I know this is not the OP Q!!I need to do a post on my theory that Vic is against the backspring Phillips
-
Backside Philips gets my vote.
-
CS my preference.

My Telluride build has both...but my preference has moved to a layer Phillips that I can use, and CS/awl back tools.
[attach id=0 msg=2391490]
-
I like Philips,,
JR
-
Hello. One of my favorite models has always been the Climber, but I admit that although it is not in the best position and the corkscrew has as many uses as you can imagine, in my day to day the Philips is more practical for me... but no That is why I stop using models with a corkscrew. I have time for everyone. Perhaps it is more emblematic is corkscrew. But since I really like the space race, the models used were from the Tinker range
Is it like having to choose who you love more, mom or dad? -
Here's what happens to me.
I have kids. My kids are young (ages 6 and 3).
These kids have toys.
The toys often have batteries.
These batteries are always behind battery doors.
The battery doors are always screwed shut.
The screws are almost always recessed and almost always size #1 or #0 (size #1, 95% of the time).
Corkscrews don't do recessed phillips screws...
So.... that back Phillips can really come in handy!
-
@marlowe221 said:
Here's what happens to me.I have kids. My kids are young (ages 6 and 3).
These kids have toys.
The toys often have batteries.
These batteries are always behind battery doors.
The battery doors are always screwed shut.
The screws are almost always recessed and almost always size #1 or #0 (size #1, 95% of the time).
Corkscrews don't do recessed phillips screws...
So.... that back Phillips can really come in handy!
After this Christmas I experienced this with a kids drone, remote control cars etc. In the past I killed a Sak by over doing it with the backside Phillips, but may need to try again.
-
I have a manager on the keys for those :0)
-
@Enginears said:
After this Christmas I experienced this with a kids drone, remote control cars etc. In the past I killed a Sak by over doing it with the backside Phillips, but may need to try again.I haven't found any kids toys yet where the screw was tight enough to put any real strain on a back side Phillips...

@Helvetica Bold said:
I have a manager on the keys for those :0)A Rambler is my usual solution to the problem as well. I tend to carry corkscrew models more often than not. Although, with my newfound love for the Recruit....
-
@marlowe221 said:
I haven't found any kids toys yet where the screw was tight enough to put any real strain on a back side Phillips...
Yeah its been maybe 15 years since the incident but I am sure I was doing something outrageous when the Sak was destroyed. Kids toys these days are almost certainly of no threat.
-
@marlowe221 said:
Here's what happens to me.I have kids. My kids are young (ages 6 and 3).
These kids have toys.
The toys often have batteries.
These batteries are always behind battery doors.
The battery doors are always screwed shut.
The screws are almost always recessed and almost always size #1 or #0 (size #1, 95% of the time).
Corkscrews don't do recessed phillips screws...
So.... that back Phillips can really come in handy!
the combo tool on the 58mm models is great for that job
-
A few weeks earlier we visited a friend. Than someone spilled his drink over the wireless keyboard of the comp. I grabbed my Super tinker and unscrew the screws. Do you know how many screws are under theese keyboards? I think about 15!?! But at the end, we cleaned it, closed it again and the night was saved :) :)
But to be honest, I never thought about half of the way I coluld use the corkscrew. My ranger tool is not that useless anymore. Thank you for that first post!!!
-
In years past I loved the phillips and corkscrew SAKs were a no go. Then I got a Manager and things changes, at least this is how I remember it
.The power of the 58mm magnetized phillips is amazing. I love telling a story how I was fine with destroying one because I was working and didn't want to descend an embankment I was on. I torqued the heck out of one and it survived.
If you only carry one SAK then I can understand the dilemma of which backside tool to choose, unless of course like Marlowe your inclined to choose the Recruit ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
