The December 2024 Utility Knife Challenge
-
Day 12:
I was suppposed to finish cleaning up the basement in preparation for an new washing machine tomorrow. Ended up sitting on the old couch I had down there watching TV most of the afternoon after I got home from buying said washer.
So, to put things short--I hope the delivery guys show up late.[attach id=0 msg=2508381]

-
<u>Day 13</u>
Just a glamour shot today unfortunately.

-
Day 14
Opening presents.
The Knipex Cutex is quite nice.
-
@ReamerPunch said:
Day 14Opening presents.
The Knipex Cutex is quite nice.I've been eyeing on it and want to get one. But the price is very Knipex😅
-
Day 14
HMM Utility Knife (Taiwanese made in Taiwan)
[attach id=0 msg=2508395]
FrontI got hooked to stationaries some time ago. And one of the online stationary store I followed listed this beauty. Needless to say, I ordered one once they were available. The cheap Chinese L size cutter is the first L size I own (don't know who left it at my home), and THIS is the first I bought.
This model comes in 3 colorways. "Silver" , "Black" and "Olive with brass dial". I would have picked a black and brass, but there is no such combination, so I go for the Olive and brass.
From the look it looks like a dial type cutter. But it actually is autolock and the dial can be tighten to lock it harder.
[attach id=1 msg=2508395]
Back[attach id=2 msg=2508395]
Ruler detached, the middle are two magnets holding the ruler.The main body is made with aluminium, the slider and dial are made from brass. The blade included is an Olfa excel black L size. The back has a steel ruler attached with magnet. The ruler is slightly curvred at one side to protect the fingers when cutting with it. If the ruler is taken off, the main body can be sticked to a steel surface. However it cannot stick to steel with the ruler attached. The ruler has a small slit on it, which can be used as a snapper.
[attach id=3 msg=2508395]
Ruler as a snapper



-
Continue
[attach id=0 msg=2508396]
This knife feels solid and substantial. Although its outline is quite straight, it is easy to hold, especially with the curved back of the ruler. The auto lock click is crisp and satisfying.[attach id=1 msg=2508396]
PartsTo change the blade, the dial has to be removed totally the slide the blade out.
[attach id=2 msg=2508396]
Together with another brass dial cutter


-
Continue
[attach id=0 msg=2508397]
[attach id=1 msg=2508397]
Packing with detailed instructions. The box is made from cardboard sticked and stacked together.I think this HMM Utility Knife is well designed and target towards more to the edc and craft market. The knife as well as the packaging are well executed. It is an art piece that will be appreciated.
[attach id=2 msg=2508397]
Carrying on handHope you enjoy this entry as much as I like this utility knife.



-
the straight edge with ruler markings. 
-
Wow! That's a good looking utility knife.

-
@powernoodle said:

My favorite utility knife/box cutter for EDC is the Screw Pop. Yeah, who knows where the name came from. But its about as minimalist as one can get in this genre, and rides easily with the rest of your pocket toys. It won't deploy in your pocket. I prefer a carbide blade for long edge retention. This thing gets used more than my EDC knife or MT blade.Amazon link: https://tinyurl.com/ms77b3x6

-
@Alan K. said:
Day 02
I would have thought there were more utility knives around the house, but this is all I've found so far. The Workpro is probably my favorite for all day carry because it is so light. It also doesn't need a tool to change the blade, and has a liner lock like the black tool, but it doesn't have the line cutter notch.I like the Workpro also

-
Day 14
The 125th Army -v- Navy Game is about to start. Best use so far! Go Navy!
-
Day 13
Opening a pair of gloves to wear while winterizing.

-
-
-
I like seeing all of the older Stanley utility knives. Reminds me of when I started working with my dad 40 years ago.
-
Work has interferred with me contributing to this Challenge so far. But I do want to participant to the amount I can.
Here are my Fastback type utility knives:

The Fastback seemingly has been a hit for Milwaukee. I bought one a couple of years ago after several people I knew did so. However, my initial experience mirrored ReamerPunch's experience with Nextool products. The driver failed on my first attempt to use it

But I did buy it again a couple of months ago with the intent to use it during this Challenge.
I like it a lot. If this was the only tool I had on me, I could get a lot of work done.
Klein's version is both an upgrade and a slight misstep compared to the Fastback. As Cody pointed out earlier in the Challenge, the Klein locks at 135° and 180°. Also, it has a removable bit driver. However, the bit driver only accepts single end bits. And the bit driver rattles around in the holder, qhich I find irritating.

The Toughbuilt utility knife appears to be built tough. And heavy.

Unlike the Milwaukee and the Klein, the Toughbuilt bit driver swings out from the side. But it does lock in place while in use. And it has a prybar. Though it is billed as an electrician's utility knife, I think it would even work better for a handyman or painter, though its weight may be a deterent.
It was sold at one time at Lowe's, but I had to buy mine on Aliexpress.Finally, we have the EDCFans utility knife, which can be found on Amazon:

I bought one 2 years ago and actually used it to install a dozen canless LED fixtures in a home. But it is decidely cheaper feeling than the other multi function utility knives I have. I gave away the first one and would not have bought this one except for this Challenge and the fact it was less than $10 due to a coupon.
I will try to share pics of my more electrician-centric utility knives when I get more free time.
-
@Adam5 I am right there with you with enjoying seeing all the Stanley utility knives. They sure do have a nostalgia factor. I remember my dad and grandpa using them. I went looking through the garage soon after the challenge started. I know I had a few Stanley’s kicking around, but I could only come up with old yeller. Thanks for adding your insight on the Klein utility knife. I have had my eye on that for over a year. One of the reasons I haven’t pulled the trigger yet is the off center bit driver. Based on your feedback and Cody it has moved down the list.
JonesE
-
With the phone being at 14% battery life and me being tired (strong beer is a contributing factor), this will be but a brief post. But y'awl are doing great, I'm looking forward to more contributions from Adam, and go Navy!
Day 14
Today I used the EABs to open a bag of trail mix. The DeWalt blade cut the plastic easier and cleaner, so it gets the win.
[attach id=0 msg=2508504]
As the EABs lack bottle openers, they had to sit back and watch while I used the MiniChamp to open the beer.
[attach id=1 msg=2508504]
Utility knife record: 10-0.
Stanley record: 1-2.
DeWalt record: 2-1..jpg)
.jpg)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

