The December 2024 Utility Knife Challenge
-
@powernoodle said:

My favorite utility knife/box cutter for EDC is the Screw Pop. Yeah, who knows where the name came from. But its about as minimalist as one can get in this genre, and rides easily with the rest of your pocket toys. It won't deploy in your pocket. I prefer a carbide blade for long edge retention. This thing gets used more than my EDC knife or MT blade.Amazon link: https://tinyurl.com/ms77b3x6

-
@Alan K. said:
Day 02
I would have thought there were more utility knives around the house, but this is all I've found so far. The Workpro is probably my favorite for all day carry because it is so light. It also doesn't need a tool to change the blade, and has a liner lock like the black tool, but it doesn't have the line cutter notch.I like the Workpro also

-
Day 14
The 125th Army -v- Navy Game is about to start. Best use so far! Go Navy!
-
Day 13
Opening a pair of gloves to wear while winterizing.

-
-
-
I like seeing all of the older Stanley utility knives. Reminds me of when I started working with my dad 40 years ago.
-
Work has interferred with me contributing to this Challenge so far. But I do want to participant to the amount I can.
Here are my Fastback type utility knives:

The Fastback seemingly has been a hit for Milwaukee. I bought one a couple of years ago after several people I knew did so. However, my initial experience mirrored ReamerPunch's experience with Nextool products. The driver failed on my first attempt to use it

But I did buy it again a couple of months ago with the intent to use it during this Challenge.
I like it a lot. If this was the only tool I had on me, I could get a lot of work done.
Klein's version is both an upgrade and a slight misstep compared to the Fastback. As Cody pointed out earlier in the Challenge, the Klein locks at 135° and 180°. Also, it has a removable bit driver. However, the bit driver only accepts single end bits. And the bit driver rattles around in the holder, qhich I find irritating.

The Toughbuilt utility knife appears to be built tough. And heavy.

Unlike the Milwaukee and the Klein, the Toughbuilt bit driver swings out from the side. But it does lock in place while in use. And it has a prybar. Though it is billed as an electrician's utility knife, I think it would even work better for a handyman or painter, though its weight may be a deterent.
It was sold at one time at Lowe's, but I had to buy mine on Aliexpress.Finally, we have the EDCFans utility knife, which can be found on Amazon:

I bought one 2 years ago and actually used it to install a dozen canless LED fixtures in a home. But it is decidely cheaper feeling than the other multi function utility knives I have. I gave away the first one and would not have bought this one except for this Challenge and the fact it was less than $10 due to a coupon.
I will try to share pics of my more electrician-centric utility knives when I get more free time.
-
@Adam5 I am right there with you with enjoying seeing all the Stanley utility knives. They sure do have a nostalgia factor. I remember my dad and grandpa using them. I went looking through the garage soon after the challenge started. I know I had a few Stanley’s kicking around, but I could only come up with old yeller. Thanks for adding your insight on the Klein utility knife. I have had my eye on that for over a year. One of the reasons I haven’t pulled the trigger yet is the off center bit driver. Based on your feedback and Cody it has moved down the list.
JonesE
-
With the phone being at 14% battery life and me being tired (strong beer is a contributing factor), this will be but a brief post. But y'awl are doing great, I'm looking forward to more contributions from Adam, and go Navy!
Day 14
Today I used the EABs to open a bag of trail mix. The DeWalt blade cut the plastic easier and cleaner, so it gets the win.
[attach id=0 msg=2508504]
As the EABs lack bottle openers, they had to sit back and watch while I used the MiniChamp to open the beer.
[attach id=1 msg=2508504]
Utility knife record: 10-0.
Stanley record: 1-2.
DeWalt record: 2-1..jpg)
.jpg)
-
Day 15
Tajima LC-703 (discontinued)
[attach id=0 msg=2508507]
Front[attach id=1 msg=2508507]
BackThis should be the utility cutter that I still own for longest time. I bought it when I was a teen looking for a hook blade for plastic sheet cutting, when I was into models. Come across this multi blade knife targeted exactly to model makers.
[attach id=3 msg=2508507]
Parts[attach id=2 msg=2508507]
Saw



-
Continue
[attach id=0 msg=2508508]
Hooked blade[attach id=1 msg=2508508]
Chisel[attach id=2 msg=2508508]
Straight edge (mounted wrong way
)It features 4 functioning blades. A straight edge, saw, hook blade and a chisel. It is made mainly from plastic. With the upper side of the rail/tip being metal. The slider is made from plastic as well. It is a flip and push design.
[attach id=3 msg=2508508]
Tip, the metal is there for added strength for backing against the blade when large force is applied



-
Continue
[attach id=1 msg=2508509]
[attach id=2 msg=2508509]
[attach id=3 msg=2508509]
Drawing out a blade[attach id=0 msg=2508509]
End cap removed, blades in compartmentThe end cap can be removed to open the compartment for extra blades storage and for changing blade. Slide out the slider and the blade and function can be changed. The compartment is enough for storing all the blades not in use, but the blades rattles in it when used.




-
Continue
[attach id=0 msg=2508510]
Straight blade, correctly mounted this timeAll four blades and handles are made in Japan with Japan stamped. The hooked and straight blades are used most. And they have rusted a bit. The saw had a few use. And the chisel is never used. The straight edge was my main heavy duty blade used when I need a longer edge and snap off utility cutter will snap from such uses. Like cutting boards and wires etc after I have moved out from my parents.
[attach id=1 msg=2508510]
Beside some other cutters and a tape measure for size comparisonRecently I tried to clean up some of the rust with 3 in 1 oils. I tried to sand off some of them when I was teen as well. I think the hooked and straight blades have higher carbon content from how much they rusted compared to the other two blades.
Too bad this and the replacement blades are no longer in production. This utility knife always has a special place in my mind, for some unknown reason. Or the reason is the blade and body are all well made Japanese goodness in that golden era I love in 1990s, in my happy carefree teenage days.


-
Day 13
[attach id=0 msg=2508511]
A pretty background!
With a newly found old stock Tribal Lock!

-
@LoopCutter said:
Day 13[attach id=0 msg=2508511]
A pretty background!
With a newly found old stock Tribal Lock!
Love that Stanley. It's all metal and chrome?
-
That's a cool one, kaevin!
Day 14
While it's not a great screwdriver, it is a nice fidget toy.

-
@BPRoberts said:
That's a cool one, kaevin!Day 14
While it's not a great screwdriver, it is a nice fidget toy.
Thanks robert
Is that a micro bit? (small electronics size)
-
<u>Day 14</u>
Busy day today especially with my sister-in-law's wedding but the EAB saw a bit of use today.
Opened up two Christmas gifts for the kiddos. A rambler for daughter which will get personalized scales swapped on and an Armbar Drive for my son.

After that, I used the EAB to open up bags of ice at the wedding and I used it as a chisel to break up the ice chunks. However, I failed to dry it off after using it as a chisel and the blade started to rust. I normally resharpen these blades twice before thinking about swapping them out but the abuse I gave it today felt it warranted a new blade. The Minichamp came to the EAB's aid.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

