The December 2024 Utility Knife Challenge
-
<u>Day 18</u>
EAB got some use today.
First, I had to free up some leaf bags from their bindings.

Then, I did.... this.

So..... for those that are wondering, yes, you can cut an onion with a utility blade. It will do so quite cleanly. However, you'll have a hard time cutting some nice looking onion rings. Just thought I'd point that out.
-
Day 19
My Olfa tap knife. This rocks. Nice and flat, and it cuts extremely well. And they're inexpensive. Thank you, Olfa.

-
Day 18
The black, no name folding utility knife had such a tight pocket clip it could not be carried using the pocket clip. I used my SOG PowerDuo (which has been my desk multitool for about 10 years now) to bend it slightly so it will now go over the edge of the pocket as intended.

-
*
The 99 is Stanley's original retractable utility knife, first manufactured in 1952. I think the organic, retro design is killer. The die-cast zinc body feels like a toy from the 1960's, and you can still get a 2-pack on Amazon for under $12. I hated missing this Challenge, but am game to do a Round 2 in 2025 with those who are interested, or I could fly a Solo Challenge.Great threat, peoples. Merry Christmas to everyone.*
-
Day 19
Decided to finish my Sharpmaker stone set.

-
@cody6268: did the EAB turn up?
@LoopCutter: I haven't gotten any Christmas cards yet.
@AzteCypher: your Opinel would be perfect for onion slicing. And Mrs. FX would never have tolerated me using a utility knife for food prep.
@ReamerPunch: I should show my tap knife, shouldn't I?
@Alan K: how easily did the pocket clip bend?
@powernoodle: I have a more recent iteration of that knife (or one that's very similar). That's another I should show.
@BPRoberts: I should get some diamond stones for my Turnbox. Not that they'd help much...
Day 19
Time to see how the utility knife handles this obnoxious "hairy tape." The box had a light dusting of snow when I retrieved it. :ahhh :ahhh :ahhh
[attach id=0 msg=2509100]
The two blades were pretty evenly matched until I needed to make precise tip cuts. Score one for the Stanley: its tip is a little better for that sort of thing.
[attach id=1 msg=2509100]
I was going to cut up the box, but it is still usable, so I just flattened it. And if you want to see what was in the box and yesterday's padded envelope, here you go.
Utility knife record: 14-0.
Stanley record: 3-3-1.
DeWalt record: 3-3-1..jpg)
.jpg)
-
Day 18: light cutting.
[attach id=0 msg=2509108]

-
@ReamerPunch said:
Day 19My Olfa tap knife. This rocks. Nice and flat, and it cuts extremely well. And they're inexpensive. Thank you, Olfa.
This one is interesting, what is the model? Is there a photo showing the blade as well? Olfa is really a "no BS brand".
@cody6268 said:
Day 17. No real use--other than the fact I took inventory again. My EAB was in the nightstand for ages, but it somehow disaappeared.[attach id=0 msg=2508963]
It is a cool tool/edc-box
-
Day 20
SDI 0444C-K InGenuity Pro
[attach id=0 msg=2509113]
Front[attach id=1 msg=2509113]
BackThis is a follow up/improved variation of the original InGenuity 0443C. This model shares the same concepts, top slider, ergonomic plastic shell.
[attach id=2 msg=2509113]
Parts[attach id=3 msg=2509113]
Back of parts



-
Continue
The main difference is the tip side design. Instead of having the string cutting notch, it features a plastic slider which locks the blade and stabilize the tip. Sliding the part towards the tip, the plastic will be pushed between the rail and blade, preventing side play and locks it. You can also lock it to prevent blade from accidentally drew out in your pocket. It gives the most stable cutting point with 1 snap length in locking position, in which all the sideway movement is from the blade flexing. That can be further improved if a 58 degree blade is used (less length protruding) when desired. I may switch this one to a 3M Ti Coated gold blade (58 degree).
[attach id=0 msg=2509115]
In most stable state, locked positionThe plastic shell is also modified to a round profile instead of triangular. While I prefer the triangular shape, this new profile is still comfortable to hold.
Action shot:
[attach id=1 msg=2509115]
Slicing a piece of used paper for warping chewed gum while studying[attach id=2 msg=2509115]
In original packageI think the string cutting notch of the original InGenuity has limited use, as you can always draw out a little blade to cut the string anyway. The lock is more useful than the notch, it also increase the precision when cutting finer details. I think it is an improved version. I like the black-gold colorway as well (it also has a white-gold colorway). If it had a metal body triangular body, I will absolutely love it even more. But I have to appreciate there is a brand continuously putting effort to improve the light duty cutter designs. Also kudos for SDI to put the ugly brand name and model sticker for the InGenuity series at the back. It would be even better if it is stamped/edged or silk screen like the front, but I think they finally realized how to tune the design to be more pleasing and they are on the right track.



-
Day 19
No use today. The pocket clip was not easy to bend because of the odd shape. It is shaped like a hockey stick to accommodate the string cutting notch and this odd shape made it want to twist rather than bend under the force of the pliers. If I had to do it again, I think it might be better to remove the pocket clip first, then use the counter force of two pliers against each other. I could bend it however and wherever I wanted it bent, then reattach the adjusted pocket clip to the knife.

-
<u>Day 19</u>
Today was a fun mail call day. Got to open Christmas cards from family and friends.

-
Day 19
[attach id=0 msg=2509120]
Pulled the utility knife from the tool bag.

-
-
-
Day 20
Pizza pie and EAB

-
@ReamerPunch said:
Olfa CTN-1Nice! And the blade has 5 snap off sections!
-
Day 20
Loopcutter is right. These are great lotto scratchers.

-
Is that a winning ticket? I don't know how to read the things. Best wishes. G

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

