Def Droning on again
-
Thanks!
When it comes to dirt and gravel there is really only so many ways that you can shoot it and make it look even remotely interesting. I have been posting a bunch on my LinkedIn over the past year, but nothing really that much more interesting. The one that has gotten the most hits is a line painting truck, so again, not overly exciting!
Def
-
I bought a DJI Neo and RC2 remote - but have not taken them out of the box yet because of being busy with my job, moving houses, elderly mother, etc. But its on the back burner when I have some time.
:ahhh

-
It’s a really great little drone, and I am super impressed with it. I don’t even have a remote for it, so I’m only using it at a fraction of what it’s capable of and I think it’s the best drone DJI has put out yet- unless you are a serious photographer or cinematographer.
There are other drone that have better cameras and whatnot but for straight up versatility and functionality I don’t think the Neo can be beat- except by the Neo 2, and the three etc. :D
Def
-
I have ordered a new drone.
It is called the Falcon V-Copter Mini, and I have been following it's development for years, and it looks pretty cool. What makes this one worth getting? I am glad you asked, here is the video:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
With half the motors it looks like it has a more impressive battery life, while still being under the 250g limit imposed by laws in Canada and other places. I don't know how well it will work, but it it an interesting concept.
That having been said, it doesn't have obstacle avoidance or any kind of follow mode, so it still lags behind even an entry level DJI model like the Neo, Flip or Mini series.
But, better battery life and better acceleration/agility (if true) could come in handy, although I really don't see much point to the Reverse Mode where it flies upside down. Other than showing off anyways.
Still, it looks pretty cool and sometimes it is good to have a non-DJI product. Long ago my friend Frank (who flew these things professionally) was on a job and found out that DJI had geolocked their drones out of a certain area. There was no real reason for it, as it was a legal spot to fly according to Transport Canada (who governs where you can and can't fly a drone) but for some reason the DJI software had the area blocked out. Fortunately he had a non DJI drone (The Parrot Anafi pictured above) with him as well, and while it wasn't as simple as it would be with a DJI drone, it was doable.
So, while DJI is absolutely the best, there are times when another drone works better and it's worth having some variety in the stable. We will see sometime this summer if this drone can stand on it's own!
Def
-
Some time ago OKnife sent me the Otacle D1 screwdriver to test out and I really like it. But I didn't have anything too exciting to do with it, but last night I decided to change that- and some blades.
I have these yellow blades from a company called Master Airscrew. Once my inner 12 year old stops laughing at the name, I'll tell you about them.
Okay.
Nope. Not yet.
Okay, good now.
Master Airscrew makes aftermarket propeller blades for most of the DJI lineup and it took them (seemingly) forever to make ones for the Neo.
When they finally did, I grabbed a set and, like the screwdriver, I didn't do anything with them for a while.
Master Airscrew props (allegedly) are designed to reduce noise and increase flight times. I have never really determined if they have or not, but I have used them on my Phantom 4 Pro, my Mini 2 and Mini 3 Pro, so why not also use them on my Neo?
Def




-
Mostly the motivator for swapping out the perfectly good factory blades is that next week I'll be visiting my father, and it makes it easy to tell his Neo and mine apart.
To start, I had to remove the prop guards, which are just clipped on. I've never popped them off but once I did I could see why I never have before. They are on there really smurfing good.

The next step was matching up the blades with the current ones. Two blades are clockwise, two are counter clockwise, and if you mix them up the drone won't fly right- or likely at all.
The Otacle D1 has a great selection of teeny screwdriver bits and the PH00 bit was the perfect size for the super tiny screws. I'd be careful using these around electronics, as the bits are magnetized- but they fortunately weren't magnetic enough to mess up the drone motors.
Def




-
There are some markings on the blades that help you identify which is which, but they are difficult to spot- so difficult that I couldn't really photograph them all that well. Basically there are a couple of very small markings on the blades.
Still, I have done this often enough and I know what I am doing. I was able to get the whole operation done in less than ten minutes and then out for a quick test flight.
Given that the Neo was able to hold its own in a decent wind, I figured I must have done something right. :D
Def




-
Not my best day today.

I lost a filter and I'll have to get new blades, but the drone was recovered and still appears to be fully functional.
In case anyone is wondering, when putting a drone up against a steel tower, the tower wins.
Def


-
Is that now spy drone?
-
Not a very good one of it is- the facility I was scanning was decommissioned probably before I was born! :ahhh
Def
-
Great way to camouflage a fixed surveillance installation. Just looks like an accident. Very cunning.
-
Funny you should say that- I’ve often thought that you could get longer videos by landing on street lights and filming from there rather than continuing to spin the props!
Def
-
The snow is finally on the retreat here, so soon I will see if the drone I bought will be useful for finding some interesting locations. I'm optimistic. Just hope I don't get it stuck in a tree somewhere out of reach. If you can do that then I'm certainly at risk!
-
Well, in all fairness, I was well above the treeline.
Unfortunately I was not as distant from the tower as I thought I was.
I am uploading the photos that I did get to Polycam now, so maybe I will have a nice 3D render to show shortly.
Def
-
I don’t know how well these will work for people but I’ll give it a shot.
This is the old lumber mill in town. My grandfather worked here.
Blind River Mill - Download Free 3D Model on Polycam
Blind River Mill by Multitooldotorg. Created with Polycam LiDAR 3D scanner app for iPhone and Android. Free 3D models, photogrammetry and LiDAR scans.
(poly.cam)
Let me know if the link doesn’t work and I’ll try something else.
Def
-
Interesting! I like that.

-
Dumb question- when you click on it, what do you see?
Do you get the interactive 3D scan or do you get just a video of the scan rotating?
Def
-
I get interactive 3d scan and can zoom and rotate it
-
Yes. A 3D model that can be rotated, zoomed and so on.
-
Awesome.
I was hoping it would work like that but I wasn't sure. :tu:
If that's the case, here is the bridge project I'm on for my day job:
Polycam Capture - Download Free 3D Model on Polycam
Polycam Capture by Multitooldotorg. Created with Polycam LiDAR 3D scanner app for iPhone and Android. Free 3D models, photogrammetry and LiDAR scans.
(poly.cam)
And here is (one of) the (many) reason(s)!why women wouldn't date me in high school. :facepalm:
Polycam Capture - Download Free 3D Model on Polycam
Polycam Capture by Multitooldotorg. Created with Polycam LiDAR 3D scanner app for iPhone and Android. Free 3D models, photogrammetry and LiDAR scans.
(poly.cam)
That one isn't done with a drone though, just the same software. :D
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



