Def Droning on again
-
Some time ago OKnife sent me the Otacle D1 screwdriver to test out and I really like it. But I didn't have anything too exciting to do with it, but last night I decided to change that- and some blades.
I have these yellow blades from a company called Master Airscrew. Once my inner 12 year old stops laughing at the name, I'll tell you about them.
Okay.
Nope. Not yet.
Okay, good now.
Master Airscrew makes aftermarket propeller blades for most of the DJI lineup and it took them (seemingly) forever to make ones for the Neo.
When they finally did, I grabbed a set and, like the screwdriver, I didn't do anything with them for a while.
Master Airscrew props (allegedly) are designed to reduce noise and increase flight times. I have never really determined if they have or not, but I have used them on my Phantom 4 Pro, my Mini 2 and Mini 3 Pro, so why not also use them on my Neo?
Def




-
Mostly the motivator for swapping out the perfectly good factory blades is that next week I'll be visiting my father, and it makes it easy to tell his Neo and mine apart.
To start, I had to remove the prop guards, which are just clipped on. I've never popped them off but once I did I could see why I never have before. They are on there really smurfing good.

The next step was matching up the blades with the current ones. Two blades are clockwise, two are counter clockwise, and if you mix them up the drone won't fly right- or likely at all.
The Otacle D1 has a great selection of teeny screwdriver bits and the PH00 bit was the perfect size for the super tiny screws. I'd be careful using these around electronics, as the bits are magnetized- but they fortunately weren't magnetic enough to mess up the drone motors.
Def




-
There are some markings on the blades that help you identify which is which, but they are difficult to spot- so difficult that I couldn't really photograph them all that well. Basically there are a couple of very small markings on the blades.
Still, I have done this often enough and I know what I am doing. I was able to get the whole operation done in less than ten minutes and then out for a quick test flight.
Given that the Neo was able to hold its own in a decent wind, I figured I must have done something right. :D
Def




-
Not my best day today.

I lost a filter and I'll have to get new blades, but the drone was recovered and still appears to be fully functional.
In case anyone is wondering, when putting a drone up against a steel tower, the tower wins.
Def


-
Is that now spy drone?
-
Not a very good one of it is- the facility I was scanning was decommissioned probably before I was born! :ahhh
Def
-
Great way to camouflage a fixed surveillance installation. Just looks like an accident. Very cunning.
-
Funny you should say that- I’ve often thought that you could get longer videos by landing on street lights and filming from there rather than continuing to spin the props!
Def
-
The snow is finally on the retreat here, so soon I will see if the drone I bought will be useful for finding some interesting locations. I'm optimistic. Just hope I don't get it stuck in a tree somewhere out of reach. If you can do that then I'm certainly at risk!
-
Well, in all fairness, I was well above the treeline.
Unfortunately I was not as distant from the tower as I thought I was.
I am uploading the photos that I did get to Polycam now, so maybe I will have a nice 3D render to show shortly.
Def
-
I don’t know how well these will work for people but I’ll give it a shot.
This is the old lumber mill in town. My grandfather worked here.
Blind River Mill - Download Free 3D Model on Polycam
Blind River Mill by Multitooldotorg. Created with Polycam LiDAR 3D scanner app for iPhone and Android. Free 3D models, photogrammetry and LiDAR scans.
(poly.cam)
Let me know if the link doesn’t work and I’ll try something else.
Def
-
Interesting! I like that.

-
Dumb question- when you click on it, what do you see?
Do you get the interactive 3D scan or do you get just a video of the scan rotating?
Def
-
I get interactive 3d scan and can zoom and rotate it
-
Yes. A 3D model that can be rotated, zoomed and so on.
-
Awesome.
I was hoping it would work like that but I wasn't sure. :tu:
If that's the case, here is the bridge project I'm on for my day job:
Polycam Capture - Download Free 3D Model on Polycam
Polycam Capture by Multitooldotorg. Created with Polycam LiDAR 3D scanner app for iPhone and Android. Free 3D models, photogrammetry and LiDAR scans.
(poly.cam)
And here is (one of) the (many) reason(s)!why women wouldn't date me in high school. :facepalm:
Polycam Capture - Download Free 3D Model on Polycam
Polycam Capture by Multitooldotorg. Created with Polycam LiDAR 3D scanner app for iPhone and Android. Free 3D models, photogrammetry and LiDAR scans.
(poly.cam)
That one isn't done with a drone though, just the same software. :D
Def
-
That is nice!
I'm sure there are women who would have loved that. I can think of one - to be fair the ratio is rather low I guess. Their loss! :D
Many years ago I took lots of pictures of a relatives baby kid from all kinds of angles. The idea is that once she gets to her 14 year party she will get a life sized 3D model of herself as a baby. Somewhat weird and bizarre yet special. I'm still not sure which weights heavier, so the actual implementation is still up for discussion - but due to the pictures there is the option at least.
-
A few weeks ago I broke my Neo. Apparently the wall/camera gimbal interaction exceeded the limitations of the unit and I had to use the insurance service, called DJI Care Refresh.
Basically when you buy a DJI drone they give you 48 hours to buy the insurance package, which will cover you if you lose or damage the drone. For the Neo it was only an extra $70, so I bought it and, after many crashes, I finally got one good enough to file a claim over. I paid the deductible of $20 and they send me a shipping label. I packaged it up and shipped it out on a Tuesday, and by Friday I had a brand spanking new Neo!
I tried it out briefly and it functions exactly as it should, which, being a brand new drone comes as no surprise.
Then a few days ago I got a call from DJI customer service asking me if it worked okay, if I was happy with the claim end so on. I said yes, I was happy and they asked if I'd fill out an online survey. I agreed and they said they appreciated that, my business etc and they asked if I'd mind if they sent me a gift. I said that wasn't necessary, but sure. I'll take a free gift! :D
Today the gift arrived safe and sound, and it's a DJI hat- a really nice one actually. I forgot to take a pic of it and I've already packaged it up to send to my father. He's going to love it and he wears hats a lot more often than I do, plus he has almost as many drones as I do! There aren't a lot of 84 year old men as skilled with a drone as he is!
I know we see a lot in the media about DJI, and honestly, I can't argue with any of it, but I will say, they do look after their customers.
Def
-
I'll be following this thread more closely as my interest in drones has moved from the professional to the merely private :D. Haven't bought one yet as I'm still unsure if it will be of much practical use in a densely populated suburb of a very privacy conscious southern German state capital...
Anyway, awesome pics, video and 3D rendering of the overpass project a few posts up, thanks Grant. Just out of curiosity, and as suggested by comparing the layout shown in Google Maps, would that be the 118/107 junction near Lake Charles? That is some serious dirt moving and concrete pouring being prepared/executed
. Am I right in idly assuming the existing two-lane overpass is likewise due for an upgrade? -
You are correct in all of your observations.... However there is no upgrade planned for the old overpass currently. In fact, a recent report has shown that the majority of our overpasses and bridges are in desperate need of work, but we don't have the budget to do most of them. I live in one of the poorest provinces in the country due to high costs here (lots of moisture causing massive heaving of structures in the winter and spring) and relatively low population spread out over a large area.
For example, the city of Ottawa has just over a million people and the province of Nova Scotia has just over a million people.
So.... Yeah, we do our best to fix and upgrade what we can, but there's only so much that can be done.
Eventually this whole section of highway will be twinned (ie, doubled into a four lane instead of a two lane) but it will be several years until it is completed.
I don't know what the drone laws in Germany are, but I imagine if the few things I know about Germany are true, it should be very well defined and accessible in a logical fashion. :D
The uses for drones are actually quite varied and span a lot of different industries. In my (current) field of construction alone they can be used in conjunction with thermal cameras to measure concrete cute rates, stress points and other cool metrics. Without a thermal camera you can do inspections, scans (as seen above) and you can also use it for measuring aggregates like gravel.
You simply 3D map the thirty foot high pile of gravel, provide a measurement of the base and the density of the material and it spits out a very accurate tonnage. Currently you have to use survey equipment and probably a dozen or so points and calculate the volume based on that. Unlike a surveyor, the software will pull literally hundreds, if not thousands of points from the photos and calculate the volume based on much more accurate data, giving a much more precise result. And there is no risk of a surveyor falling when trying to climb up or down from the top of the pile.
Or you can just make silly little videos like this for LinkedIn so you can seem like a very smart person, when in fact you just like to fly drones!
https://youtu.be/7LMs0ScMFRw?si=wRownsaSbU6K2rQ-&utm_source=MTQxZ
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



