EDC Bit Ratchets
-

Granite Rocknroll Ratchet set
(The ratchet can also be found branded by Blue Point, KS Tools, PowerTorque, Topeak)
Warranty: Lifetime
Max torque rating: 30 Nm / 22 ft lb
Weight: 29g
Set weight: 132g
Length: 93mm
Head width: 15mm
Head clearance with standard bit: 25.5mm (adds 0.5mm)
Teeth count: 52
Minimum swing arc: 7°
Bit retention: spring
Extension retention: magnet
In-line driver retention: magnet
Bit material: S2 steel
Handle material: Chromium-Vanadium steel
Price: $33 with 9 bits, extension, wallet
Bits:
Allen 2, 2.5, 3, 4, 5, 6, 8, Torx 25, Phillips 2Accessories
The Granite Rocknroll Ratchet set comes with the ratchet, an extension, 9 bits, and a wallet to carry everything.
The extension is branded "Granite". The bits are color-coded, and made of S2 steel.The wallet is single-stitched and has velcro closure. It is a trifold design, with elasticated webbing pockets for everything. There are also two tiny pockets for Quick Links, but the set does not contain any.
The dimensions and design could use some improvements.
There is a flap to prevent the ratchet and extension from simply coming out of their sleeves.
The issue is that the width is quite longer than the ratchet, and more so than the extension, so these can move significantly until they touch the flap, and the sleeves that hold the ratchet and extension do not run the entire length of the wallet. The extension has to almost completely come out of its sleeve until it meets the flap.
This could have been eliminated if the wallet width was shorter, and have the flap sit closer to the ratchet and extension.
Also, this is a trifold but every fold is quite narrow. The first fold holds the bits, the second holds the ratchet and extension, and the third fold is the lid.
There is no pocket or any room for anything else to be added to the kit, apart from two tiny pockets for bike chain links.
The set is available with black or camo wallet.
Dimensions
The Granite is the same exact ratchet as the Topeak Ratchet Rocket. 15mm wide head, 52 teeth, 93mm long, 29 grams heavy. Quite unobtrusive.
Bottom right: LaBear Folding, CROM, Anvanna, Pro Bike, Railer, Engineer, Granite, Geinxurn, Klein, Milwaukee, PrestaCycle, Rujoi Flex-headTeeth Count
52 teeth for a 7 degree minimum swing. Quite good for a 15mm wide head.Bit Retention
The same spring as the Topeak, Wera, Klein, etc. Retention is excellent.
The inline driver and extension have strong magnets, so stubby bits with thin tips may require pliers to be removed.Bit compatibility
Thanks to the hole in the head, the Rocknroll ratchet can use double-ended and Leatherman bits. Regular and stubby bits have no issues.
The inline driver and extension cannot use double ended bits as they are too long to engage and be used.
Switch action
The action switch is ribbed, small, and with excellent detent. It does not wobble at all, it does not protrude enough to get caught on anything, and it will not be bumped accidentally, reversing the action.
The switch can be operated by just a fingertip, but a fingernail may be necessary, as the detent is quite strong and the switch itself quite small for it to be operated just by skin.Ease of use
The switch can be operated quite easily with a fingernail; maybe not so easily with just a fingertip.
Stubby bits cannot be removed from the in-line driver easily.
Standard bits can be removed extremely easily, despite the ratchet having a strong spring.
The tool is small, with an extremely narrow head, and excellent head clearance with a bit inserted. The tool is still long enough and strong enough to perform well within the bicycle community.
The in-line driver is a much appreciated feature and works well. It would have been even better if the stem of the driver had some knurling, to provide traction.
The high teeth count and knurled finger wheel make things quick.
Both bit driver sockets are funnelled to make bit insertion easier.
The spring keeps the bits in place, and also holds the ratchet mechanism in the head, so this can be disassembled if needed.
Construction Quality
Like the Topeak, this is a high quality tool, with excellent fit and finish. Machining, assembly, finish, tolerances, centering, everything is flawless on this. There are no issues with this ratchet. It is very well-made, and it shows.
The wallet is quite good but not impressive. The edges of the outer layer of fabric have not been rolled, sealed, serged, or covered, so there are threads that will come apart. There is no noticeable fraying, but the outer threads are visibly loose. With normal use, this should last.
It would have been much better if this was addressed instead of being left unfinished.Portability
At 29 grams and 93mm long, the Granite Rocknroll is on the small side of mini ratchets. It can sit comfortably in all sorts of pouches, pockets, pen sleeves, even tethered on gear with a clip through the hole in the head.
At 132 grams, the set is still quite lightweight.
It would have been nice if the wallet had space for other gear and edc items, like we have seen with other similar ratchet kits. The PrestaCycle and Blackburn ratchets had excellent wallets with pockets for more items. Even the Topeak had a small pocket and elastic webbing so it could also be expanded somewhat.
The Granite Rocknroll wallet is quite limited in this capacity.
Value
At $33 the Granite Rocknroll Ratchet set is certainly not on the cheap side. Still, it is an excellent purchase, considering the quality, capability, and probably most importantly, the lifetime warranty.Conclusion
This review can be summed up in one sentence: Same ratchet as the Topeak, better warranty, worse wallet. The Granite is the exact same tool as the Topeak, except for the branding.
Topeak offers a two-year warranty with original purchase receipt. Granite offers a lifetime warranty. The only negative is the wallet. Topeak offers a better wallet, though not by much. The PrestaCycle and Blackburn wallets are the best options. They are nicely designed, hold items securely, and can hold more gear, not limited to tiny items.
Topeak is the undisputed king of edc and bike ratchets, always being among the first results in any such search. And to manage this with just two years of warranty is impressive, and good news for the Granite Rocknroll. The Granite is the exact same tool so the same features, quality, and capabilities, but also a lifetime warranty.
If the wallet seems unimpressive, then maybe the Blackburn or PrestaCycle will be better options.
Pros
-Lifetime warranty.
-S2 steel bits.
-Exceptional quality and finish.
-Knurled disk allows quick turning of loose fasteners with fingertips.
-Ratchet end compatible with many double-ended bits.
-Thin and narrow head combined with high teeth count can work in the tightest of places.Cons
-Wallet has no extra space for more gear.
-Wallet is about an inch longer than it could be.
-Wallet outer edges are not finished and will start fraying.
-No set variations available other than wallet color.If you liked this ratchet, also check out:
-
@ReamerPunch said:
(The ratchet can also be found branded by Topeak and Blue Point)I'm pretty sure Blue Point is Snap-On's "budget line." However, I didn't see that particular ratchet (or the expected extortionate price) when I browsed the Snap-On catalog. Still, looks like it could be a pretty good set, even if the wallet leaves some to be desired.
-
Here's the BluePoint set. I see it in Amazon Japan occasionally. It does look nice. But I cannot justify the price. It's the Topeak/Granite ratchet set essentially. But for quite a lot more money. I'll get it if I find it for a reasonable price.


-
I do believe that is a Snap-On product...and I'm unsurprised you can't justify the price. Thanks for posting that photo!

-
@ReamerPunch said:
It sure does!
I've seen that before. And it's not that expensive. I would prefer an in-line driving socket instead of a bottle opener, but it does have several functions. Do you find the bottle-opener notch annoying at all?
It seems so many companies want to put bottle openers on everything. I just don’t understand. Why would you want a glass bottle around where you are working?

-
That's why I will never use the can/bottle openers on either of my ST300s. They were exposed to oil, ATF, hydraulic fluid, and other such nasty chemicals...not exactly things I want mixing with my Jarritos. -
A good combo with the new 711l mini ratchet is one part of the dewalt dw2336.
Can handle double sided bits, gives you extension and one extra place for bit to store.

-
-
Blue Point BLPKSB004 mini ratchet is in!


-
@ReamerPunch said:
Blue Point BLPKSB004 mini ratchet is in!
Just wish it would have included T6 and T8 bits... -
-
-
I'm seeing many new mini ratchets.
Real Avid has a new T-Handle ratchet, in a couple different sets. Not too pricey.
That T-handle one from many brands now comes in a smaller, more compact set.
Railer seems to be releasing the mini ratchet with one of their bit holders.
-
Geinxurn has a set of three ratchets, extension, and box, but for less money you can get the Disen set, which is three ratchets, bit extension, socket extension, bits in holder, and a pouch that looks like those Maxpedition Platy pouches. Other companies seem to be jumping on the "multiple mini ratchets" train.

-
Geinxurn has been releasing many new ratchets and sets lately. I reviewed a small set by them, and I can tell you I'll get more.
I think that long ratchet is T-handle but completely pass-through, so not exactly like the PrestaCycle. It might be in the future...
-

Anvanna T-handle ratchet set
(Can also be found branded by Amir, Ankilo, Asnish, Bomivoi, Criacr, Doaho, Duralt, Faireach, Fuduoa, JXTZ, Keekit, Kelin, Loficoper, MrTono, Olipiter, Oria, Saker, SakerPlus, Spedpai, Usuauu, Veysmou)
Weight: 51g with no extensions
Weight: 99g with all three extensions
Set weight: 455g
Length: 62mm with no extensions
Head width: 29mm
Head clearance with standard bit: 30 mm (adds 5mm)
Teeth count: 40
Minimum swing arc: 9°
Bit retention: magnet
Extension retention: magnet
In-line driver retention: magnet
Bit material: Chromium-Vanadium steel
Handle material: Aluminium alloy
Price: $30 with 32 regular bits, 8 long bits, 3 extensions, caseBits:
Allen 1.5, 2, 2.5, 3, 4, 5, 6, 6.35, 8
Pozi 1, 2, 3
Slotted 3, 4, 5, 6,
Torx 5, 6
TamperProof Torx 8, 10, 15, 20, 25, 27, 30, 40
Phillips 0, 1, 2, 3,
Spanner 4, 6Long bits: Phillips 1, 2, Slotted 5, 6, Tamperproof Torx 15, 30, Allen 4, 5
Accessories
The Anvanna t-handle ratchet comes with 40 bits, three extensions, and a case.
32 bits are regular, with Phillips, Metric Allen, Torx, Tamperproof Torx, Slotted, Pozidriv.
8 bits are long bits, with sizes repeating in the regular bits.
The two extensions for the sides are identical. The longer extension can be used in any socket, but has to be in the ratcheting socket for the case to close properly.
The case is hard plastic, with a metal inlay on the top. The lid holds with long bits with yolks. These have held up with use.
The regular bits are held in by friction upright in the base. The two halves of the case are attached with proper hinges. The ratchet simply sits in its position and will not survive the upside-down test.
The case closes magnetically, with strong magnets. There is also a magnetizer gap inside.
Dimensions
The main ratchet part is 62 mm long, and can be tucked in tins and pouches, but it is quite wide at 29mm, and weighs 51 grams. The ratchet with all three extensions attached weighs 99 grams, so this will be heavier than most.
The ratchet adds 5mm to a bits clearance.
Bottom right: LaBear Folding, CROM, Anvanna, Pro Bike, Railer, Engineer, Granite, Geinxurn, Klein, Milwaukee, PrestaCycle, Rujoi Flex-headTeeth Count
This has 40 teeth, so a 9 degree minimum swing. This would be considered low for a regular right-angle ratchet, but for this, it is less important.Bit Retention
All bit drivers on this have magnets that are perfectly strong for bits and the extensions it comes with.Bit compatibility
No bit driver on this is deep enough for double-ended bits. Regular, stubby, long, impact, these are ok.
Switch action
The switch is just a touch longer than usual, and quite flat, and a perfect stadium shape.
It sits in a perfectly flat surface, with no scallops or anything, so it is very easy to operate.Ease of use
This is a t-handle ratchet, and the idea behind its design seems to be more torque and better reach, hence the three extensions and long bits.
Having 40 teeth or adding 5mm to a bit's clearance is less of an issue for this design.
The three extensions offer multiple configurations and grips, depending on the required torque, reach, and comfort.
The switch is easy to use and won't get reversed accidentaly.
The bits are very easy to identify and easy to insert and remove. The bit selection is extensive with many sizes of Metric Allen, Tamperproof Torx, slotted, even long bits.
This is made out of an aluminium alloy, so it is lighter than the size would suggest.
The case has a magnetizer should one be needed.Being a t-handle design, the ratchet needs more clearance to spin, so this ratchet may have issues with bits too close to obstructions. Still, for these applications, an inline driver can be used.

Construction Quality
Construction quality appears quite good, more than a set like this would suggest.
The case is nicely made, closes properly with strong magnets, and has proper hinges. Everything sits perfectly in their spot.
The bits are well-made, nice and crisp. The extensions fit perfectly on the main body with very little wobble.
The ratchet mechanism works properly, smoothly, with no grittiness, grinding, and jamming.Portability
Portability seems to have been a bit lower on the list of priorities for this set.
Being an aluminium alloy, the ratchet is definitely more lightweight than if it were steel. However, it is still quite heavier than most.
The entire set weighs 455 grams, certainly not conducive to edc in any way.
The ratchet can still be kept in an edc pouch, or pen sleeve. Disassembled, it can also fit in an Altoids tin.
Value
With 32 regular bits, 8 long bits, three extensions, and a nice case, this is a good purchase for $30.
There are similar sets to this, without the long bits, and only 24 regular bits, for $25.
There is also a set with only the ratchet parts and 8 bits, in a compact case, for $20.Conclusion
This set seems to be ubiquitous, coming under many, many brands. It is certainly an interesting design, though maybe not perfect for edc.
The entire case is very heavy and quite bulky. The ratchet itself is also quite heavy, with all three extensions attached.
And as this is a t-handle design, it comes with its own set of quirks.This is not a bad option by any means. The ratchet disassembles into small parts that fit in Altoids tins and edc pouches etc.
It is well-made, comfortable, and offers nice reach and torque. Lastly, and arguably most importantly, it costs $30 and can be found on discount from time to time. That is an excellent price for such a versatile tool, especially considering that it comes with an extensive bit set, and a good, proper case.
Pros
-Good value for money.
-Extensive set with ratchet, extensions, 40 bits, nice case.
-Many different configurations possible.Cons
-T-handle head is more prone to obstructions.
-Not a low-clearance tool.
-Entire set is too heavy for edc.If you liked this ratchet, also check out:
-
Sometimes a T-handle is just the tool I need. I like the ability to use this one as a more conventional driver, too. As I don't carry such things, this could fit really well in my tool kit. Thanks for putting it on my radar!

-
It is also available with just 8 bits, in a much more compact case. Brand is Bomivoi.


-
@JonesE said:
Heads up for fans of Klein Tools. Klein will be releasing a smaller version of the 32787 Mod Box bit and driver set that has the bit ratchet. The smaller set will have part number 32787S. It has the smaller compact Mod Box and ratchet bit driver. The set will now have a hex to 1/4” drive adapter which the larger set was missing. I will be picking up this set once it releases. I hope this will help someone out.RP, I didn’t know where else to put this. This seemed like the most logical place since it contains a bit ratchet.
JonesE
Almost four months later, and I am still waiting for the Klein 32787-S set to appear in Amazon.

It looks like a nice set, and the ratchet seems different than the rest I have. It would be nice to review another Klein mini ratchet.
I would have liked to see a few more bits in the empty space in the case, though. Maybe even the flip socket extension, instead of a generic extension.
I guess I'll wait some more.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
















































