Getting back into 3D printers.
-
@Chako said:
On the other hand, I dug up some boxes and found 3 1KG spools of PLA and 3 1.2K spools of PLA, and 1 1Kg spool of PETG that I purchased back in 2020. All of them are still in their tight vacuum sealed packaging. I wonder if this is still good lol?I would think so if they are the common thermoplastic kind of filaments and not some exotic wood particle crystal color craziness. Most thermoplastics can be remelted and recycled again and again, and a filament printer do just melt them one more time.
(Also one of the reasons plastic product manufacturers really hesitate to mix or add reinforcement to the plastics. It makes recycling improbable. Most plastic products, at least in Europe, will have a stamp stating the material type and production date. That is for easy recycling. It also makes it a lot easier to weld or do glue repairs as you know what plastic you got).
-
I was going to try some different stuff. All bought back in 2020 but forgot about it until now when I vaguely remembered buying them. They are all sealed and new. What do you think?
.5 Kg Eryone Rainbow PLA
.5 Kg Eryone Silk Copper PLA
.5 Kg Eryone Silk Gold PLA
1 Kg Print OX Bronze Metal PLA
1 Kg Print OX Transparent Purple
1 Kg Print OX Wood PLA
1 Kg Print OX Transparent Red PLA
1 Kg Overture White PETG -
PLA and PETG are both thermoplastics so I would assume yes. Give it a try. What is the worst that can happen? (Be warned, I'm good with famous last words. In particular "How hard can it be?" keeps slapping me in my optimistically naive face).
-
You are right, the only way is to try it.

-
I’d so love to get into this, the kid bought me a printer, but some how the printer lost the program or something, the kid rebooted it but it just didn’t end up right,, idk, but there’s a LOT I’d like to print!
JR -
How much did you pay for that empty box

I really want to do this too, and maybe a laser cutter...
Still would love a machine that does all the things with different modules...
-
The filament just arrived.
Got 4 PLA, 3 PLA highspeed, and 1 PLA Plus in mixed colours. These are all Anycubic RFID 1 Kg spools.
Whoey, it was a first anniversary sale special where you order 8 and you get what you get. The printer is $639 Canadian right now. With the added 8Kg filament deal, it maxed out at $765 all told. I was prepared to buy it off of Amazon. ca for $799.
MadPlumbarian, you should try to get yours working again.

-
Seems reasonable
-
@Whoey said:
Still would love a machine that does all the things with different modules...Does it do all things well? I got a few different machines, and maybe apart from putting a laser head in a 3D printer or machining center I don't think they would be a great all-in-one mix.
I want a concrete or pottery 3D printer. Seems like a total mess, and likely is, but a fun mess. Except for the cleaning.
-
Going to look into installing the software, installing the spools, and hopefully try it out tomorrow.
The instructions could be a lot better, at least what they give on paper.
I just looked into the mixed bag of filament they gave me. I am not familiar with the Plus and High Speed stuff.
AI Overview
PLA is a standard, easy-to-print material for decorative models. PLA Plus (PLA+) contains additives for improved toughness, durability, and heat resistance. PLA High Speed (or High Flow) has a higher melt flow index for fast printing, allowing for rapid melting and cooling to reduce print times significantly.Here is a breakdown of the differences:
PLA (Standard): Ideal for beginners and decorative projects due to its ease of use, low cost, and wide availability. It is more brittle than PLA+ and requires lower temperatures (180–220 °C).PLA Plus (PLA+): A refined formulation (often containing additives) that makes it less brittle (more ductile) and more functional for load-bearing or frequently handled parts. It often has slightly higher temperature resistance (200–250 °C).
PLA High Speed (HS/HF): Specifically engineered to melt and cool quickly, supporting speeds up to 600 mm/s. It has high fluidity, allowing for high-speed printing (e.g., on Bambu Lab or Creality Hyper Series).
Key Takeaways
Use PLA for inexpensive, simple, non-functional models.
Use PLA+ for parts that need to withstand impact or heat.
Use High Speed when print time is the primary concern, ensuring your printer can handle the high speeds. -
I haven't done 3D filament printing the last 2-3 years I think, but my experience with PLA as a material was a mixed bag. Likely because they came from different manufacturers. One was quite stiff and easy to print well. I believe that was the one of unknown origin included with the printer. Then some third party PLA was similar to that but not as good, and two rolls in particular was almost soft and rubber like when done. These day it likely both better and more consistent especially if it comes from the manufacturer with RFid for easy parameter settings.
-
Same here, it has been a couple of years. My workplace went with Bambu Labs and I was impressed with the core XY enclosed concept with attached multi-spool holder. The Anycubic S1 appears to offer much of the same at a lesser budget with the added bonus of the 4 spool holder being able to actively dry the filament.
-
Here’s mine, I just don’t know the first thing of it besides that it’s in the attic,, the kids the one with any knowledge of computers, heck he had one custom made that freaking cools with liquid..
JR
-
I have 2 of those.
<a href="https://flic.kr/p/2joYk8F" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50143067913_1f8c574d7e_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8751A by Chako, on Flickr
Are you using Cura Slicer on your computer?
-
I installed the slicer program that came on the USB Drive, and copied everything to a folder on my desktop. Then I plugged the drive into the printer after being walked through several steps. Installed the first spool of gray PLA into slot 1. I tried to print a Benchy but failed as I did not push the PLA filament all the way into the Ace Pro unit. That was a quick fix as this time I witnessed the filament being taken up by the unit.
The 25x25x25 build field with door closed.
<a href="https://flic.kr/p/2s3EPri" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55164175335_8ed3bc6d1f_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_123657454A by Chako, on FlickrThis is super easy as everything is now automated.
<a href="https://flic.kr/p/2s3EPqm" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55164175280_41edf0cf9d_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_123830516.NIGHTA by Chako, on FlickrThe first roll. RFID is it going to work?
<a href="https://flic.kr/p/2s3CTmc" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55163798271_8747695c2b_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_124123870.NIGHTA by Chako, on Flickr<a href="https://flic.kr/p/2s3yhyA" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55162900802_bd46e06891_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_131341597.NIGHTA by Chako, on Flickr
If I buy Anycubic filament, they self set themselves with RFID. It worked. You can also use other filaments with a few easy extra steps to set some parameters.
<a href="https://flic.kr/p/2s3CTjU" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55163798196_5dd790b3f1_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_131347880.NIGHTA by Chako, on Flickr<a href="https://flic.kr/p/2s3CTk5" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55163798206_86f46c7aa2_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_131423622.NIGHTA by Chako, on Flickr
The USB socket is in a convenient location, that is unless the printer is in a printer farm with other printers next to it.
<a href="https://flic.kr/p/2s3E8VD" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55164042419_4f6dc307e1_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_131615994.NIGHTA by Chako, on FlickrThese are a few built in starter models already on the USB drive. I had to print the test PLA boat first as is traditional.
<a href="https://flic.kr/p/2s3E8VU" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55164042434_090796a010_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_131635306.NIGHTA by Chako, on FlickrThe auto level is big. I loved my Ender 3s but manual leveling sucked a lot. This feels like cheating...but it will take me 45 minutes to print the test boat and lets see what the results will be.
-
@Chako said:
I have 2 of those.<a href="https://flic.kr/p/2joYk8F" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50143067913_1f8c574d7e_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8751A by Chako, on Flickr
Are you using Cura Slicer on your computer?
I have no clue, I’d have to ask the kid
nice workstation with all the leather tools! 
JR -
Thanks.
I just finished my first print. Auto everything is super nice. The Benchy came out nicely.
<a href="https://flic.kr/p/2s3EnGk" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55164088743_0af0f1b3c0_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_142804131A by Chako, on Flickr
<a href="https://flic.kr/p/2s3EN8q" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55164170934_d21091d5cf_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_142851582A by Chako, on Flickr
<a href="https://flic.kr/p/2s3FtLp" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55164304275_139f8c7c79_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_143224000A by Chako, on Flickr
<a href="https://flic.kr/p/2s3EnF8" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55164088673_fce67c7c24_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_143239226A by Chako, on Flickr
<a href="https://flic.kr/p/2s3EnFi" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55164088683_9d30d71097_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_143251655A by Chako, on Flickr
-
Just finished a second print found on the USB drive, the flexi dinosaur. It turned out great.
<a href="https://flic.kr/p/2s3F2CR" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55164216373_864c5578e3_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_152529808A by Chako, on Flickr
<a href="https://flic.kr/p/2s3G8FT" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55164431845_bf43c4fade_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_152722630A by Chako, on Flickr
<a href="https://flic.kr/p/2s3zzLE" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/55163153802_b26ee446ab_6k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PXL_20260323_153120757A by Chako, on Flickr
My next step is to figure out the new slicer on the computer and see if I can print a poop collector. The one thing this printer does terribly is wastage of filament if multiple colours are going to be used because it only has the one print head. There is a rear hole where the printer eliminates the waste filament as it purges the print nozzle. This will catch the poop and shunt it to the side for easier pick up.
-
OMG, I can print from the computer to the printer wirelessly. Big advancements from the 2018 Creality Ender 3 printers I have.
-
1- Auto bed leveling is, IMHO an absolute necessity. I got rid of both my first two printers because bed leveling was such a complete PITA and occupied more time than printing did. My current printer is a cheap Da Vinci Mini W+, which doesn't have much going for it (especially now that Da Vinci has gone under) but it does at least have auto bed leveling. I would never suggest anyone gets a printer without this feature.
2- I would 100% go with an enclosed unit for my next one. I am probably going to go with the Bambu Labs models next and I absolutely will go with an enclosed model just to maintain ideal temperature and humidity levels a lot more effectively.
3- I have owned three separate 3D printers from three different manufacturers and I have never printed a Benchy on any of them. As a further crime against the entire industry, I have no intention of ever printing a Benchy on any printers I own in the future.
4- I would very much like to reclaim poop as I hate waste of pretty well any kind. Unfortunately, the cost of grinders and extruders don't seem to have come down as much as the price of the printers themselves. Like many people who have experimented with 3D printing, I have a pile of failed prints that I would absolutely love to reclaim.
5- My Da Vinci is limited to PLA, which admittedly is my filament of choice for most printing, but it would be nice to be able to use different materials, specifically ABS for tougher prints.
6- I am sure your chipped filament rolls won't be as frustrating as the Da Vinci ones, but I have had issues with mine claiming there was no filament left on the spool when there absolutely was, and other issues. As it is, nowadays when I use the machine I leave a blank spool with the "all purpose" chip in it on the printer and I just feed from a spool hanging behind the machine as it's easier than putting up with the machine's bullsmurf.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login