Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

How hard is it take apart and reassemble a SAK?

Scheduled Pinned Locked Moved Swiss Army Knights Forum
28 Posts 1 Posters 2.5k Views
  1. Home
  2. Tool Talk
  3. Swiss Army Knights Forum
  4. How hard is it take apart and reassemble a SAK?
How hard is it take apart and reassemble a SAK?
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • IMR4198 Offline
    IMR4198
    Posts: 6,451
    IMR4198 Offline
    IMR4198
    wrote on last edited by
    #1 Quote Reply

      You yourself are the best judge of your skill level and available tools. I would suggest that you might find rewarding the reconditioning of the one you already own. Definitely give it a good clean and a little oil. Touch up the tools and see how you do at polishing the scales. It is easy to find the methods to do all of that. Maybe do a scale change if the ones you have are beyond help. The effort will be rewarded.
      Best wishes. G
      :cheers:

      1 Reply Last reply
      • magentus Offline
        magentus
        Admin Team
        Posts: 21,659
        magentus Offline
        magentus
        Admin Team
        wrote on last edited by magentus
        #2 Quote Reply

          Howdy!

          As long as you're careful and feel relatively confident with basic tools modding is within anyone's reach.

          You didn't mention whether you want to mod a celidor (plastic) scaled SAK or an alox (metal) one. Celidor is easier because the scales hide all sorts of tomfoolery, whereas alox shows your efforts for all to see :rofl:

          I'd recommend perusing the SAK mods threads before you decide whether to proceed yourself or not - there's all sorts of great info on there.


          /topic/43303

          Also, don't hesitate to ask questions - we're a friendly and helpful bunch and will gladly offer any help or experience (and there's a wealth of that) to help you on your way.

          Feel free to pm me with any questions - I've done quite a few mods myself and was helped in turn by the fine members here. :cheers:

          1 Reply Last reply
          • Myron Offline
            Myron
            Posts: 2,432
            Myron Offline
            Myron
            wrote on last edited by
            #3 Quote Reply

              I'm with Magentus and recommend you mod your own. There's plenty of helpful threads with pictures over on the modding sub-forum. Anyone can do this with basic tools.

              I would recommend starting with a 93 mm Alox SAK. They're easier to work on and you can always screw it together and avoid the business of peening your pins, which is much more art than science.

              Good luck.

              1 Reply Last reply
              • RedRamage Offline
                RedRamage
                Posts: 427
                RedRamage Offline
                RedRamage
                wrote on last edited by
                #4 Quote Reply

                  Any recommendations on where to get the brass pins and/or the collars? I've found a few places that sell the brass rods, but not the collars.

                  1 Reply Last reply
                  • magentus Offline
                    magentus
                    Admin Team
                    Posts: 21,659
                    magentus Offline
                    magentus
                    Admin Team
                    wrote on last edited by
                    #5 Quote Reply

                      @RedRamage said:
                      Any recommendations on where to get the brass pins and/or the collars? I've found a few places that sell the brass rods, but not the collars.

                      Aliexpress sells brass collars

                      1 Reply Last reply
                      • RedRamage Offline
                        RedRamage
                        Posts: 427
                        RedRamage Offline
                        RedRamage
                        wrote on last edited by
                        #6 Quote Reply

                          @magentus said:
                          Aliexpress sells brass collars

                          It seems the 91mm sets are sold out everywhere! Esty, Ebay, Aliexpress... I can find lots of sets for 58mm, some 84mm, 111mm... but no 91mm!

                          Well, I'm probably going to do some testing on some older 91mm before I take about any "real" ones... that'll give me some practice and if I do it right I can harvest collars from those.

                          1 Reply Last reply
                          • Huntsman Offline
                            Huntsman
                            Global Moderators
                            Posts: 5,781
                            Huntsman Offline
                            Huntsman
                            Global Moderators
                            wrote on last edited by
                            #7 Quote Reply

                              Yep - I am with the others - Do it yourself - It's great fun and not too hard -
                              Although you have to be careful - And I gotta say it took me forever :o
                              But you can get exactly what you want - And feel very proud of yourself afterwards.

                              As Mags said lots of how to guides in the mods section
                              Hopefully you can harverst the bushings from the donor knife??
                              I got the brass rods from a model/crafting shop - You know - The ones that sell model trains and Airfix kits (do they still exist) etc etc - But metal suppliers may also sell them - But may not do retail quantities.

                              BTW - What is your planned toolset? ???

                              1 Reply Last reply
                              • RedRamage Offline
                                RedRamage
                                Posts: 427
                                RedRamage Offline
                                RedRamage
                                wrote on last edited by
                                #8 Quote Reply

                                  @Huntsman said:
                                  Hopefully you can harverst the bushings from the donor knife??

                                  I hope so... but I also discovered that I might have another option. Based on this post the 91 uses 2.5 for the outer and 2.25 for the one of the inner pins (the other inner doesn't have a collar). In the end I'm hoping to make two knives. That means I need:

                                  8 x 2.5 collars
                                  4 x 2.25 collars

                                  Now, According to the same post 84mm knives use 2.2 for all pins. So if I get one set of collars for an 84mm, that will cover two knives plus some spares if I make a mistake. Likewise according to this post the 111mm with a slider lock uses 2.5mm for all the pins. So if I order two sets of those I'll end up with 12 collars, again more than enough for two knives.

                                  I'm first gonna try my hand as drilling out an older knife and see if I can save the collars... if so then I don't have to buy. But if not I have options.

                                  BTW - What is your planned toolset? ???

                                  Still deciding that. But my working plan right now, as I said, is two knives, and I'm going to EDC both if this works out. Right now I carry a big knife so two medium won't be an issue and I like the concept of having two different tool sets that will compliment each either. For example right now I know that one of the two will have the bit driver and a magnifying lens. The other will have the pliers. Being able to have a screwdriver and a pliers in different tools just makes sense, ya know?

                                  The other other thing I have "confirmed" in my head so far is that one will have a blade and the other a serrated blade.

                                  1 Reply Last reply
                                  • RedRamage Offline
                                    RedRamage
                                    Posts: 427
                                    RedRamage Offline
                                    RedRamage
                                    wrote on last edited by
                                    #9 Quote Reply

                                      Okay, so I've ordered my new brass rods, and I've got my first draft of tool sets for the two knives. I've also decided I'm going to do one in Red Scales because, that's traditional. The other will be in Blue scales. So:

                                      Red:
                                      Lg Blade - Sm Blade - Corkscrew
                                      Metal Saw[ - - Chisel
                                      Scissors - - Hook
                                      Fish Scaller &Wood Saw - -
                                      Pliers - -

                                      Blue:
                                      Lg Serrated Blade - ? ??? ? - Corkscrew
                                      Magnifying lens - Phillips Screw Driver -
                                      Bit Driver - Bit Holder -
                                      Large SD/Bottle Opener - Small SD/Can Openner - Reamer

                                      I have to do some final measurements when I have some time with my calipers instead of just eyeballing it, but I think this should produce pretty similar thick SAKs. If I need to pad one out a little larger I might look at adding a layer... we'll see.

                                      My one unknown right now is what to pair with my serrated blade. I know I can but the combo tool or another small blade, but I'd like like to reduce redundancy if possible. Ideally I'd like to put the watchmaker took here as that's a bit solid tool for prying things open. I know that this will fit in with the big blade, but I don't know if it will in with the corkscrew as a back tool.

                                      1 Reply Last reply
                                      • Huntsman Offline
                                        Huntsman
                                        Global Moderators
                                        Posts: 5,781
                                        Huntsman Offline
                                        Huntsman
                                        Global Moderators
                                        wrote on last edited by
                                        #10 Quote Reply

                                          The watch case opener is usually on an 84mm model - Not sure if pin sizes are the same - And of course it doe feature on the XX 91mm models
                                          But I would think you would not have a problem with the CS - And you can always do a bit of filing if necessary
                                          But nice and unusual choice of tool!

                                          You'll have to name your models of course - My suggestions .....
                                          The Closed SwissChamp and the Cyber Explorer

                                          Why the 'closed' SwissChamp? ??? .... No openers of course! ;) :D

                                          1 Reply Last reply
                                          • RedRamage Offline
                                            RedRamage
                                            Posts: 427
                                            RedRamage Offline
                                            RedRamage
                                            wrote on last edited by
                                            #11 Quote Reply

                                              @Huntsman said:
                                              The watch case opener is usually on an 84mm model - Not sure if pin sizes are the same - And of course it doe feature on the XX 91mm models

                                              My main donor knife is going to actually be a custom 91 SAK I had someone else make for me MANY years ago (like probably 20+ years ago). It has a serrated blade and the watch opener, but not with the corkscrew on the back so I'll be okay on the pin size. I can't honestly remember if the guy who made it modded an 84mm or if he or I got ahold of 91mm watch opener.

                                              The donor I stopped EDCing quite a while back because it started getting dirty, worn and I damaged a few of the tools. Still it'll make a worth donor because it has virtually everything I'll need.

                                              But nice and unusual choice of tool!

                                              The goal here (I think I already stated it but because I love to hear myself talk... er, I mean type) is to have the two compliment each other. There are times when it would have been so handy to have the pliers to hold a nut in one hand while screwing it with the other. Or using the Mag Glass while trying to grab something small with the pliers or cut it with the scissors.

                                              You'll have to name your models of course - My suggestions .....
                                              The Closed SwissChamp and the Cyber Explorer - Why the 'closed' SwissChamp? ??? .... No openers of course! ;) :D

                                              Oh geez... I hadn't thought about that yet. My old custom knife's name sort of fell into my lap. I had it made right around the time that the first duo core CPUs were coming out and it was a cybertool with two main knives. So, it was the Cybertool Core Duo.

                                              Hmm... I actually really like CyberExplorer as it does combine a lot of features of both the Cyber.
                                              Not wild about the Closed SwissChamp. Maybe... OutdoorMechanic? I think it also combines a lot of tools from the Outdoorsman (original and 'new') as well as the Mechanic. The Mechanic also has sentimental value for me as it was my first ever EDC.

                                              1 Reply Last reply
                                              • RedRamage Offline
                                                RedRamage
                                                Posts: 427
                                                RedRamage Offline
                                                RedRamage
                                                wrote on last edited by
                                                #12 Quote Reply

                                                  I've started dismantling my donor knives... One of which is an old and crusty Huntsman. I just posted a picture of it in the exploded/dismantled knives thread.

                                                  Two questions as I move towards the assembly stage:

                                                  1. How important at the different types of liners? Just in my knives alone I see all kinds of different styles and types and more online. How critical is it that I get these right?

                                                  2. Any recommendations on cleaning these parts, especially the liners, before assembly? Would I just trying sanding them a bit to clean off any caked on or light corrosion?

                                                  1 Reply Last reply
                                                  • Huntsman Offline
                                                    Huntsman
                                                    Global Moderators
                                                    Posts: 5,781
                                                    Huntsman Offline
                                                    Huntsman
                                                    Global Moderators
                                                    wrote on last edited by
                                                    #13 Quote Reply

                                                      Hey RR,

                                                      I am no expert - But I would say:

                                                      1. Not too important - Apart from the obvious ones - ie Corkscrew liner and to make sure you can always access the nail nicks

                                                      2. Yes I use a very fine grit sandpaper, then a lightly oiled rag!

                                                      1 Reply Last reply
                                                      • RedRamage Offline
                                                        RedRamage
                                                        Posts: 427
                                                        RedRamage Offline
                                                        RedRamage
                                                        wrote on last edited by
                                                        #14 Quote Reply

                                                          @Huntsman said:
                                                          2. Yes I use a very fine grit sandpaper, then a lightly oiled rag!

                                                          Speaking of oil... recommendations on which oil to use?

                                                          1 Reply Last reply
                                                          • MadPlumbarian Offline
                                                            MadPlumbarian
                                                            Posts: 38,623
                                                            MadPlumbarian Offline
                                                            MadPlumbarian
                                                            wrote on last edited by
                                                            #15 Quote Reply

                                                              Best of luck :tu:,,
                                                              I first had a custom done by a member, but then I did two others by myself, the one piece of advice I can give you is just be patient! It can be tricky but just take your time,
                                                              JR

                                                              1 Reply Last reply
                                                              • RedRamage Offline
                                                                RedRamage
                                                                Posts: 427
                                                                RedRamage Offline
                                                                RedRamage
                                                                wrote on last edited by
                                                                #16 Quote Reply

                                                                  Progress update: I've taken apart all my donor knives. I had an old huntsman plus my original custom knife I had made more than a decade ago. Unfortunately I found a few problems in that process. Specifically, the scissors did not have the correct spring and the modder modified the hook to work with the wrong spring. It also appears that my metal saw was modified a bit because it too uses a different spring than I was expecting. Finally, I only had one key ring attachment and I wanted a key ring on both... so I went eBay shopping.

                                                                  I found a cheap used Mountaineer off ebay and that supplied me with the the correct spring for the scissor and an unmodified hook. It also has a complete metal saw... no chisel, but I can live with that. Plus this one had the spring for the opener with the keyring on it, so that fills all my needs! That arrived yesterday and I look it apart last night.

                                                                  I've also clean a number of the liners with sandpaper and sanding pads...

                                                                  Last, I've finalized my tool layout. I've love to hear any opinions or thoughts on if I'm making a mistake with this order of tools at all.

                                                                  Not too bad with them only being slightly over a mm apart in terms of width. Part of me is trying to figure out a way to get them even closer. The obvious solution is to add another liner on the Blue knife, but that seem silly to do just to make it a little wider. I've also considered adding the spatula, but this wouldn't be a tool I used extensive and, <u>more importantly</u>, I do not want to spend the money to buy an expensive SAK *just *to harvest the spatula from it.

                                                                  1 Reply Last reply
                                                                  • TazzieRob Offline
                                                                    TazzieRob
                                                                    Posts: 1,493
                                                                    TazzieRob Offline
                                                                    TazzieRob
                                                                    wrote on last edited by
                                                                    #17 Quote Reply

                                                                      You could get them to 0.48mm difference by swapping the pliers and the magnifier layers between tools... :think:

                                                                      1 Reply Last reply
                                                                      • Adreaver Offline
                                                                        Adreaver
                                                                        Posts: 12
                                                                        Adreaver Offline
                                                                        Adreaver
                                                                        wrote on last edited by Adreaver
                                                                        #18 Quote Reply

                                                                          @RedRamage said:
                                                                          figure out a way to get them even closer.

                                                                          What if you move the file from its current location, placing it between the pliers and saw? That would let you drop a liner, as you can have the file/saw/scaler with no liners in between, and you'd be at 24.29mm for Red, only 0.3mm difference. At that point sand 0.1mm off each of Red's 3 internal liners and they'd be exactly the same thickness.

                                                                          One other question - why Corkscrew on both, rather than Phillips on one of them? Is it to carry two different micro drivers?

                                                                          1 Reply Last reply
                                                                          • RedRamage Offline
                                                                            RedRamage
                                                                            Posts: 427
                                                                            RedRamage Offline
                                                                            RedRamage
                                                                            wrote on last edited by
                                                                            #19 Quote Reply

                                                                              @TazzieRob said:
                                                                              You could get them to 0.48mm difference by swapping the pliers and the magnifier layers between tools... :think:

                                                                              I could, but I very specifically want the pliers on a different knife from the screw drivers. The idea is to be able to hold a nut with the pliers while turning a screw with the other knife. So I'm starting with the "rule" that all drivers are on one and the pliers on the other.

                                                                              1 Reply Last reply
                                                                              • RedRamage Offline
                                                                                RedRamage
                                                                                Posts: 427
                                                                                RedRamage Offline
                                                                                RedRamage
                                                                                wrote on last edited by
                                                                                #20 Quote Reply

                                                                                  @Adreaver said:
                                                                                  What if you move the file from its current location, placing it between the pliers and saw? That would let you drop a liner, as you can have the file/saw/scaler with no liners in between, and you'd be at 24.29mm for Red, only 0.3mm difference. At that point sand 0.1mm off each of Red's 3 internal liners and they'd be exactly the same thickness.

                                                                                  Interesting thought... I'll admit I'm not I don't know enough about the reason for liners to know if this is a good idea or not. I do know that Victorinox has knives with the wood saw and fish scaler without a liner in between, but I'm not sure if they have any with the metal, wood, and fish all together without a liner. I also know that they have a knives with the an arrangement of *Liner *- Metal - *Liner *- Wood - Fish - Liner. I would seem that Victorinox thinks there needs to be a liner in there. I'm just copying them.

                                                                                  One other question - why Corkscrew on both, rather than Phillips on one of them? Is it to carry two different micro drivers?

                                                                                  Exactly this reason. I did consider the Philips instead of the cork, but I already have the inline Philips which I think is a better big Philips driver. I know I could replace the inline Philips with a lite, but I've never been a big fan of those lights and when I need a light I've got my phone's light I can use... plus I might add a mini flashlight to my edc too.

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Swiss Army Knights Forum
                                                                                  4. How hard is it take apart and reassemble a SAK?
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0