Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

EDC Bit Ratchets

Scheduled Pinned Locked Moved Reviews
377 Posts 1 Posters 118.0k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Farmer XF
    Farmer XF
    Farmer X
    wrote on last edited by
    #366

    Bit ratchets could prove very useful for the business I plan on starting, so I'll have to review this thread as time permits. Thank you for keeping it going! :cheers:

    1 Reply Last reply
    0
    • ReamerPunchR
      ReamerPunchR
      ReamerPunch
      Global Moderators
      wrote on last edited by ReamerPunch
      #367

      Blue-Point BLPKSB004 Ratchet Set

      (The ratchet can also be found branded by Granite, KS Tools, PowerTorque, Topeak.
      Same size and basic design as Budnitz, Fortis, Katana, Rujoi, Signet, Sonic, and Smato)

      Warranty: Lifetime
      Max torque rating: 30 Nm / 22 ft lb
      Weight: 29g
      Set weight: 166g
      Length: 93mm
      Head width: 15mm
      Head clearance with standard bit: 25.5mm (adds 0.5mm)
      Teeth count: 52
      Minimum swing arc: 7°
      Bit retention: spring
      In-line driver retention: magnet
      Bit material: Chromium-Vanadium steel
      Handle material: Chromium-Vanadium steel
      Price: $33* with 20 bits and case
      (price is average; no new stock exists; set is discontinued)
      Bits:
      Phillips: #1 x2, #2 x2,
      Slotted: #4 x2, #5 x2, #6 x2
      Pozidriv: #1 x2, #2 x2, #3 x2
      Tamperproof Torx: 10/15/20/25

      Accessories
      The Blue-Point BLPKSB004 Ratchet comes with 20 bits and a case.
      The bits are made of Chromium-Vanadium steel, and are highly polished.
      The case is made of hard plastic, with proper hinges and a long, steel hinge pin. It is lined with foam and the bits and ratchet stay in by friction. The lid has a sticker with bit designations.

      Other than branding, the ratchet is identical to the Topeak and Granite ratchets, reviewed in this thread previously.

      Note that there are multiple versions of the BLPKSB004 Ratchet Set, all with different bit selections.

      Dimensions
      The Blue-Point ratchet is the same exact ratchet as the Topeak Ratchet Rocket and Granite Rock'n'Roll ratchet. 15mm wide head, 52 teeth, 93mm long, 29 grams heavy. Quite unobtrusive.


      Bottom right: CROM, Vessel 4mm, Sundry, Ares, Wera, Tone, Railer, Blue-Point, WorkPro, Victorinox

      Teeth Count
      52 teeth for a 7 degree minimum swing. Quite good for a 15mm wide head.

      Bit Retention
      Same spring as the Topeak, Wera, Klein, etc. Retention is excellent.
      The inline driver magnet is quite strong, so stubby bits with thin tips may require pliers to be removed.
      The bits the ratchet comes with are so highly polished, that some are also quite hard to remove with just fingers.

      Bit compatibility
      Thanks to the hole in the head, the Blue-Point ratchet can use standard double-ended bits, Steinwhale stubby double-ended bits, and Leatherman bits. Regular and stubby bits have no issues.
      Steinwhale stubby double-ended bits fit perfectly in the inline driver.
      The inline driver cannot use standard double ended bits as they are too long to engage and be used.

      Switch action
      The action switch is small and has excellent detent. It does not wobble at all, it does not protrude enough to get caught on anything, and it will not be bumped accidentally, reversing the action.
      The switch can be operated by just a fingertip, but a fingernail may be necessary, as the detent is quite strong and the switch itself quite small for it to be operated just by skin.

      Ease of use
      The switch can be operated quite easily with a fingernail; maybe not so easily with just a fingertip.
      Stubby bits cannot be removed from the in-line driver easily.
      Standard bits can be removed extremely easily, despite the ratchet having a strong spring.
      The included bits are quite highly polished, which makes them a little slippery.

      The tool is small, with an extremely narrow head, and excellent head clearance with a bit inserted. The tool is still long enough and strong enough to perform edc tasks.
      The in-line driver is a much appreciated feature and works well. It would have been even better if the stem of the driver had some knurling, to provide traction.
      The high teeth count and knurled finger wheel make things quick.
      Both bit driver sockets are funneled to make bit insertion easier.
      The spring keeps the bits in place, and also holds the ratchet mechanism in the head, so this can be disassembled if needed.

      Construction Quality
      The included bits are quite highly polished, which helps with corrosion. They are finished flawlessly, as is the ratchet, which makes sense, as it is the identical ratchet branded by Granite and Topeak.

      Portability
      At 29 grams and 93mm long, the Blue-Point is on the small side of mini ratchets. It can sit comfortably in all sorts of pouches, pockets, pen sleeves, even tethered on gear with a clip through the hole in the head.
      At 166 grams, the set is still rather lightweight, considering it has 20 bits.

      The case is quite compact, but admittedly not the perfect size or shape for edc. The wallets similar ratchets come in, like Topeak, Granite, Blackburn, are all arguably better choices for edc. Still, there is nothing wrong with the Blue-Point case. It closes securely, it holds everything quite convincingly, and there is plenty of space for an extension and a few more bits and bobs.

      Value
      Being long discontinued complicates its value for money. It certainly is a nice set, with a high quality ratchet, 20 bits, a case, and arguably most importantly, lifetime warranty. All these will of course mean nothing if you cannot find it anywhere, but it does become available on various auction sites etc, although the price may fluctuate quite a lot.

      Conclusion
      It is no surprise that the Blue-Point BLPKSB004 Ratchet Set may seem familiar. It shares its ratchet with Topeak and Granite sets: same high quality, compact size, and features, different bit selection and case. If this proves too difficult to track down, and you are set on getting it, then a Granite, Topeak, Smato, Signet, Katana, etc set will offer a very similar experience, and you will probably save yourself some money.

      It is still recommended, of course. It would not make much sense not to. This is an excellent little ratchet with many nice features, it comes with 20 bits and a case, and it has lifetime warranty. Though discontinued, it still shows up every now and then, and although it may be overpriced, you could get lucky and find a bargain.

      Pros
      -Lifetime warranty.
      -Same dimensions, features, high quality, portability as Topeak ratchet.
      -Multiple set versions.

      Cons
      -Hard to find.

      If you liked this ratchet, also check out:

      1 Reply Last reply
      0
      • ReamerPunchR
        ReamerPunchR
        ReamerPunch
        Global Moderators
        wrote on last edited by
        #368

        Just in! :mail:
        Hazet 2300SH-1
        RockBros mini ratchet set

        20260804_143940.jpg

        1 Reply Last reply
        0
        • ReamerPunchR
          ReamerPunchR
          ReamerPunch
          Global Moderators
          wrote on last edited by ReamerPunch
          #369

          So, quick update. **The RockBros is going back. Do not buy it. **
          The ratcheting mechanism does not work properly. When set to tighten, it occasionally jams up and has to be jiggled free, only to bind up again.
          When set to loosen, it is almost permanently jammed, and does not work at all.

          1 Reply Last reply
          0
          • Antti LammiA
            Antti LammiA
            Antti Lammi
            Global Moderators
            wrote on last edited by
            #370

            Well that sucks

            1 Reply Last reply
            0
            • ReamerPunchR
              ReamerPunchR
              ReamerPunch
              Global Moderators
              wrote on last edited by ReamerPunch
              #371

              RockBros TG-T8008 mini ratchet set

              Weight: 32g
              Set weight: 158g
              Length: 95mm
              Head width: 20mm
              Head clearance with standard bit: 33mm (adds 8mm)
              Teeth count: 72
              Minimum swing arc: 5° (in theory)
              Bit retention: magnet
              Extension retention: magnet
              In-line driver retention: magnet
              Bit material: S2 steel
              Handle material: Aluminium alloy
              Price: $20 with 12 bits, extension, case, and drawstring pouch
              Bits:
              Phillips 1, 2
              Allen 2.5, 3, 4, 5, 6
              Torx 15, 20, 25, 30
              Slotted 4

              Accessories
              The RockBros TG-T8008 set consists of ratchet, extension, 12 bits, a holder, and a drawstring pouch.
              The bits are made of S2 steel and are highly polished. The extension is listed as aluminium alloy and has a magnet. The pouch is single-stitched and has two draw-strings.

              The holder is plastic. The ratchet attaches to the side, in a spot contoured for the ratchet's shape. The ratchet is flat, as opposed to the usual cylindrical body of most ratchets in this thread. The flat body allows the ratchet to enter its spot sideways, then twisting it 90 degrees makes it fit perfectly in there. The extension is stored while attached to the ratcheting end, so the lid that closes to secure everything captures the extension, preventing it and by extension the ratchet, from twisting. When closed, there is enough room in the lid for the ratchet to rattle left and right, but everything does seem to stay in the holder securely. Keep in mind that because the ratchet stays in the holder by shape, but not by friction/magnet/yokes, so if the lid is open, simply shaking the holder can make the ratchet fall out.

              The bits are held in two bit holders. Each bit is held in place with an individual neodymium magnet. These bit holders pivot out and can also twist around, although this seems to have little use. They do seem to be removable. There is a big hole in one corner that will fit large carabiners or cord for a lanyard, and there is a smaller hole on the bottom for a thinner lanyard or split-ring as well.

              Dimensions
              At 95mm, this is a little longer than average. Thanks to the Aluminium alloy, at 32 grams, it is quite lightweight for its length and width.
              The ratcheting end adds 8mm to a bit's clearance, which is a bit higher than average.
              The head is 20mm wide, which for 72 teeth would be fine, but it is not.


              Bottom right: 711L, Ares, Tone, Hazet 863MB, Engineer, PK Tool, RockBros, Neiko, Victorinox

              Teeth Count
              With 72 teeth, this, theoretically, has a minimum arc swing of 5 degrees. In reality, it has 20 degrees of slop before engaging the next tooth. This is the worst slop we have seen so far, and it almost rivals ratchets that have only 16 teeth.

              Bit Retention
              Bits are held in the ratchet, inline driver, and extension with magnets.

              Bit compatibility
              The ratcheting end and inline driver are extremely shallow for double-ended bits.
              The extension is deep enough for Steinwhale stubby double-ended bits.

              Switch action
              The switch is loose, sloppy, and switches the action between tightening and locked. More on that below.

              Ease of use
              More like "Difficulty of use" to be honest. Using this would have been straightforward: knurled wheel for quickly turning fasteners, 72 teeth for 5 degrees of minimum arc swing, inline driver.

              Unfortunately, using this ranges from average to impossible. The ratchet is sloppy, loosening does not work, the inline driver is bad, and the ratchet adds 8mm to a bit's clearance.


              Bottom left: the ratchet is set to tighten. It is able to hold up weight, since it is set to turn anticlockwise.
              Bottom right: it is set to loosen. It should not be able to hold any weight. It should have collapsed instantly. But it is bound.

              Construction Quality
              Construction quality is not good. This is probably the worst ratchet we have seen so far in this thread, and the only ratchet I have received, reviewed, and will send back.

              The ratcheting mechanism does not work. When set to tighten, the ratchet binds up occasionally and will unbind with a little jiggling only to jam again after a few teeth.
              When set to loosen, the ratchet is almost locked. It will only work if the switch is kept to the right and down with my thumb, which is less than ideal, and even then, the action is very crunchy, crude, and rough.

              As mentioned previously, the ratchet should have 5 degrees of minimum arc swing, but there is a 20 degree slop before the ratchet engages the next tooth.

              The inline driver is made crudely. Bits do not sink in completely, and therefore do not engage the magnet properly. Also when pulling out bits, metallic flakes are sometimes stuck on them.

              The knurled finger wheel is barely knurled. It requires a firm pinch to spin it.

              The ratchet has an almost mirror finish, but it covered in scratches and dents.

              The holder lid pivot pin protrudes from one side and can snag on fabric or skin.


              The ratchet is set to loosen. It should not be able to hold any weight.

              Portability
              The holder is a little bulkier than it could be. Still flat enough for a pocket.
              The ratchet weighs only 32g, so it would have been a nice, lightweight option.

              Value
              There is no value to speak of when the ratchet does not work as a ratchet. Do not buy this.

              Conclusion
              Well, here we are. It was only a matter of time to receive a ratchet that did not work out of the box.
              There are a few points that I wanted to make.
              The holder could be a little smaller. There is a 5mm gap between the bits' tips and the frame. This serves no purpose. The bit holders pivot out to make the bits accessible. There is also a gap between the extension's tip and the frame.
              The holder is also way over-engineered. There are many moving parts, that just add steps to using the tool. It also seems that were it to be dropped from any height, it would just disassemble into a plastic mess.
              The high polish of the ratchet makes it a little slippery and it collects fingerprints like no tomorrow.
              The ratcheting end protrudes a little from the frame so it will not sit perfectly flat in a pouch.
              Having a magnet for the ratcheting end makes it add 8mm to a bit's clearance, and with no hole in the head, it cannot use double-ended bits.
              At 32g, this is quite lightweight for its size. It would have been a nice, lightweight option that is still long enough for a comfortable grip and some torque, although the Aluminium alloy is certainly inherently weaker than Chromium-Vanadium.

              Alas, all those points are pointless. The ratchet does not work as a ratchet. That negates any positives it may have had. Even the worst ratchets before this worked as ratchets, which was supposed to be a given, but apparently not. Do not buy this.

              Pros
              -Able to be refunded.

              Cons
              -Ratcheting mechanism does not work when set to loosen.
              -Ratcheting mechanism binds constantly when set to tighten.
              -20° of slop before engaging next tooth.
              -Holder is much bulkier than it could be.

              If you liked this ratchet-shaped object, you probably skipped the text. Check these instead:

              1 Reply Last reply
              0
              • ReamerPunchR
                ReamerPunchR
                ReamerPunch
                Global Moderators
                wrote on last edited by ReamerPunch
                #372

                Writing the Hazet 2300SH-1 review, and what do you know. Licensed by Wera. Nice. 😄


                1 Reply Last reply
                0
                • ReamerPunchR
                  ReamerPunchR
                  ReamerPunch
                  Global Moderators
                  wrote on last edited by ReamerPunch
                  #373

                  Writing the Hazet 2300SH-1 review, so I got out the Wera Tool Check Plus 1 to compare things, and this happened. Let's see what Wera's warranty is like.

                  The Tool Check Plus 1 was delivered to me on 12-Oct-2025. I've had it for about 10 months, and the bit driver has been removed and put back maybe twenty times so far.


                  1 Reply Last reply
                  0
                  • ReamerPunchR
                    ReamerPunchR
                    ReamerPunch
                    Global Moderators
                    wrote on last edited by
                    #374

                    Second RockBros. Same issue. Do not buy this.

                    1 Reply Last reply
                    0
                    • nakkenN
                      nakkenN
                      nakken
                      wrote on last edited by
                      #375

                      Bummer, I really liked its size. Thanks for the review :hatsoff:

                      1 Reply Last reply
                      0
                      • ReamerPunchR
                        ReamerPunchR
                        ReamerPunch
                        Global Moderators
                        wrote on last edited by
                        #376

                        @ReamerPunch said:
                        Writing the Hazet 2300SH-1 review, so I got out the Wera Tool Check Plus 1 to compare things, and this happened. Let's see what Wera's warranty is like.

                        The Tool Check Plus 1 was delivered to me on 12-Oct-2025. I've had it for about 10 months, and the bit driver has been removed and put back maybe twenty times so far.

                        Got a reply from Wera Customer Service. They said that for the first year after purchase, the seller can warranty the item. But they did offer to replace the part. It has been ten months since I got it from Amazon AU, them being the actual seller, so I will have Amazon replace it, since I still can. Should be here tomorrow.

                        1 Reply Last reply
                        0
                        • ReamerPunchR
                          ReamerPunchR
                          ReamerPunch
                          Global Moderators
                          wrote on last edited by ReamerPunch
                          #377

                          Kakuri Sangyo Sundry SDR-B02 mini ratchet set

                          (Sundry is a product line of the Kakuri Sangyo brand.
                          The ratchet can also be found branded by Ares, SabreCut, Sealey)

                          Max torque rating: 58 Nm / 43 ft lb
                          Weight: 58g
                          Bit set: 46g
                          Socket set: 60g
                          Set weight: 164g
                          Length: 85mm
                          Head width: 21mm
                          Head clearance with standard bit: 25mm (adds no length)
                          Teeth count: 72
                          Minimum swing arc: 5°
                          Bit retention: Ball detent
                          In-line driver retention: Ball detent
                          Bit material: S2 steel
                          Handle material: Chromium-Vanadium steel
                          Ratchet gear material: Chromium-Molybdenum steel
                          Price: $14 with 8 bits and 6 sockets
                          Bits: Phillips 1, 2, Flat 4, 6, Allen 4, 5, 6, Square Socket adapter
                          Sockets: 4, 5, 5.5, 6, 8, 10

                          Accessories
                          The Sundry mini ratchet comes with seven standard bits, a socket adapter, and six sockets.
                          The bits are stored in a plastic, modular bit holder that consists of three pieces. This allows users to carry three, five, six, or eight bits, depending on configuration. It has a loop that allows more bit holder pieces to be added, or can be used to attach the bit holder to something with a carabiner or clip.
                          The sockets are stored in a plastic rail and are held by friction. It has a hole that fits small split-rings, so it can also be attached to a carabiner.

                          Dimensions
                          The Sundry is the exact same ratchet as the Ares, except painted black. It is short, at 85mm. It has a stocky, robust body, with a somewhat wide head. The Sundry adds no length to the inserted bit.


                          Bottom right: CROM, Vessel 4mm, Sundry, Ares, Wera, Tone, Railer, Blue-Point, WorkPro, Victorinox

                          Teeth Count
                          The Sundry has a very high teeth count, at 72, which gives a very low swing arc, at 5 degrees. This is just excellent for an inexpensive ratchet like this.

                          Bit Retention
                          The Sundry has ball detents for both slots. This allows the bits to be removed easily, even stubby bits. For a little more retention, have the ball detent rest on the marked side of bits, for more traction.

                          Bit compatibility
                          Stubby bits can be removed very easily. Standard double-ended bits and Leatherman proprietary bits will fit the ratchet end, if one end is slim enough to clear the hole. They do not work in the in-line driving socket, as it is too shallow for them to engage and turn properly.
                          Impact bits and extensions work beautifully in both ends, as the ball detents are at the perfect height to hold them in place.

                          Switch action
                          The Sundry has a sliding switch. This has better detent than the Ares. It does not move accidentally. As it is a slider, it sits flush against the body and does not catch on anything. It is knurled in two opposite directions, to make it easy to operate.

                          Ease of use
                          The Sundry has an in-line bit driver slot, and both slots have ball detents, making it easy to swap bits. The weight is not enough to cause concern. When using the in-line driver slot, the neck flanges provide enough traction for the tool to turn even stubborn screws. The high teeth count allows for very little swing to turn a bit, so even with almost no space to move the tool, it will still turn fasteners. The ratcheting end also adds no length to a bit, allowing for very low clearance, especially paired with stubby bits.
                          It does not have a knurled finger wheel. The in-line bit socket is not funnelled, which is unusual, although bits are still easy to insert.

                          Construction Quality
                          The Sundry is decently finished. The slider's channel and neck flange channels may look just a tiny bit unpolished, but the black paint does a good job of masking any imperfections. The paint itself has held up nicely. The ratcheting action is smooth and consistent. The bits fit the slots well with little wobble. The ball detents work as they should, providing adequate retention.

                          Portability
                          The Sundry may seem heavy, but it is also very short. If it comes down to length but not weight, it will do well. With wide ends and a thin body, it fits well in edc pouches and multi-tool case side-sleeves, even pen sleeves. The ratcheting head has a hole, which allows the tool to be clipped to a pack or key-chain with a quick release clip or carabiner.
                          The bit holder and socket rail can be attached to a clip.

                          Value
                          At $14, it is already a good value for money, considering its pros and that it comes with eight bits and six sockets. But it gets even better, when compared to the Ares mini ratchet set.

                          Conclusion
                          The exact same ratchet as the Ares, the Sundry has high teeth count, high bit compatibility, an in-line driver, and adds no length to a bit's clearance. It also comes with six sockets, and eight S2 steel bits, compared to the eight Chromium-Vanadium the Ares comes with. It also is less expensive than the Ares.

                          This is truly an amazing deal, considering the accessories and all that the ratchet has to offer. It may be an elusive deal, though, as the set is not readily available. It does appear in Amazon Japan and Amazon AU, so not impossible to find.

                          The Ares ratchet has remained a staple in the recommendations of this thread, and the Sundry is no different. If you happen upon it, and the price has not changed much, this is a capable little set and excellent value for money.

                          Pros
                          -Heavy duty.
                          -Flanged neck for easier in-line driving.
                          -High teeth count.
                          -Ratcheting end adds no length to inserted bit.
                          -Good but not overly strong bit retention.
                          -Ratchet end compatible with many double-ended bits.
                          -Better value than the Ares ratchet set.

                          Cons
                          -Not readily available.

                          If you liked this ratchet, also check out:

                          1 Reply Last reply
                          0

                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                          With your input, this post could be even better 💗

                          Register Login

                          • Login

                          • Don't have an account? Register

                          • First post
                            Last post
                          0
                          • Categories
                          • Recent
                          • Popular
                          • World