SAK Stack Challenge 2026
-
They have their own gravity field

-
I've been reading on previous runs of this challenge, especially the 2020 edition hosted by comis.
/topic/82928
Comis dealt with this exact issue and came up with this:Quote from: zrxoa1 on October 07, 2019, 06:32:15
I can’t remember what model my Wenger is. Does this count? EDIT: I think mine is the Champ, came before the Tool Chest... (Image removed from quote.) Sent from my iPhone using TapatalkZrxoa, I would tend to say yes, but that may invite questions whether Champion/Champion Plus/EvoS54 are eligible too, just to be fair to everyone, could I verify this with Mods before I get back to you?
Zrxoa, just checked, so as long you could help to verify it's a Champ(which has the same tools as ToolChest, just earlier version), I think it's a go.
At the point, I think it is fair to say most variant of Swisschamp, Cybertool and Toolchest are all welcomed, so as long it has same tools or more.
I was told we got a little leeway so as long the layers are compatible, Champ as predecessor has the same layer as Tool Chest, and this puppy got 7 layers too. I would say yes!
Comis mentioned seven layers. But this challenge specifically includes the Champion, and early Champions (A and B versions) had six layers. It wasn't until the C version that it had seven.
Also, SAKwiki breaks down layers as 1,2,3,4,5 and + Apparently in SAKwiki, anything over 5 layers is a biggun.
So unless a mod says otherwise, I'm going with 85mm and up, six layers and up so long as its toolset fits with the intent of the Champion. Even if it's a Wenger Giant; I want to see someone actually carry and use that!
I'm certainly not gonna miss that chance because it doesn't have "Champion" or "Cybertool" in the name. It does need to be a Victorinox or Wenger, though.
And, that does include the Workchamp (six layers) and Workchamp XL (ten layers). In fact I would really like to see someone enter the challenge with a Workchamp XL and help me decide if I really want one or not!
-
I think I like the rules the way they were written in the description. In this month's Barlow challenge, there was a big opportunity to add in almost anything to qualify. Jack knives of various kinds, etc. All that stuff got weeded out to the credit of the host, etc. If 'specification creep' was allowed, then almost anything from a CASE Peanut up would have been a valid substitute. In the first Classic challenge that "What about this one?" and "Why not X?" was quibbled over until the challenge was almost ruined by "What ifs?" The Super Stack types already had their challenge. The 111s have their own challenge coming up. Adding more stuff only waters down the challenge.
Best wishes, G

-
@LoopCutter said:
I thought they have their own challenge.They do. I'm ok with them being here too, if anyone wants to carry one.
-
@WECSOG said:
They do. I'm ok with them being here too, if anyone wants to carry one.That is the same as accepting a SUPERtool variant being allowed in a REBAR challenge.
And, “ In fact I would really like to see someone enter the challenge with a Workchamp XL and help me decide if I really want one or not!
”You can accomplish the same objective by reading old challenges about the same tools.
-
I don't know enough about Leatherman tools to offer an opinion on that. But the SAK Stack challenge is not about the name; it's about the stack.
Besides all that, even if it were about the name, the XLT and XXL are still Swisschamps in name.But it's about carrying a SAK that is bigger and bulkier than most people are willing to carry. If someone wants to make it more challenging by carrying an XXL or even a Wenger Giant, that's ok by me. It adds to the entertainment value.
-
From the 2020 SAK Stack Challenge, hosted by comis:
@comis said:
Just got back from the pm, turns out the host do have some leeway on how to run the challenge.So let's welcome the Vic Swisschamp family to join(XL, XLT, XVAT, XXLT), and Wenger Tool Chest family(Tool Chest plus, Matterhorn, Snap Shackle and SGT fix it)!

-
Very nice! -
Very handsome, Gordon. Now you can turn something else into a Silvertech. Best wishes. G

-
@LoopCutter said:
Well the results are complete![attach id=0 msg=2588629]
From SIVERtech to SAPPHIRE
[attach id=1 msg=2588629]
[attach id=2 msg=2588629]
Thank you.

Nice!

-

My new sheath for my SwissChamp has arrived! I think I'm going to do the whole challenge with the one knife, even though I have some others that may qualify.
As long as we're throwing out opinions, my personal take is that the true spirit of this challenge is to carry anything with at least 6 layers (or at the very least, is at as thick as one with 6 layers). I think a Cybertool-S shouldn't really count for that reason, but I've never had one so I don't know how thick it actually feels when carried. On the other hand, I also have a Wenger Monarch and a Vic Outdoorsman that feel like they really should qualify, but the rules as written exclude them. Regardless, it doesn't really matter, because I'm going to carry a regular Swiss Champ.
In the end, I think what's important is that people carry some big chonker SAKs and use some tools. And of course, have fun!
-
@LoopCutter said:
Well the results are complete!From SIVERtech to SAPPHIRE
Thank you.


-
Another way around the badge issue is to have a completely different badge made up, such as the Pocket Giant Challenge, which would cover anything with 6 layers and up. As long as we have at least 10 people in a challenge, it's an option.
-
My new sheath for my SwissChamp has arrived! I think I'm going to do the whole challenge with the one knife, even though I have some others that may qualify.
As long as we're throwing out opinions, my personal take is that the true spirit of this challenge is to carry anything with at least 6 layers (or at the very least, is at as thick as one with 6 layers). I think a Cybertool-S shouldn't really count for that reason, but I've never had one so I don't know how thick it actually feels when carried. On the other hand, I also have a Wenger Monarch and a Vic Outdoorsman that feel like they really should qualify, but the rules as written exclude them. Regardless, it doesn't really matter, because I'm going to carry a regular Swiss Champ.
In the end, I think what's important is that people carry some big chonker SAKs and use some tools. And of course, have fun!
I agree on the CT-S. But, it qualifies only because the rules specifically state that any variety of CT qualifies.
The Monarch has 7 layers, so it qualifies. -
@Barry Rowland said:
Another way around the badge issue is to have a completely different badge made up, such as the Pocket Giant Challenge, which would cover anything with 6 layers and up. As long as we have at least 10 people in a challenge, it's an option.I'm open to that, if anyone wants to take it up. It would mean two new badges though; a 30 and a 60.
-
@mathmitch7 said:
I think a Cybertool-S shouldn't really count for that reason, but I've never had one so I don't know how thick it actually feels when carried.It feels like a 4-layer, since the main blade layer and opener layer are both normal layers, and the bit driver is effectively about twice as thick as a typical layer.
CT-S is the only one of the CT family I would actually consider carrying in pocket.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



