SAK Stack Challenge 2026
-
From the 2020 SAK Stack Challenge, hosted by comis:
@comis said:
Just got back from the pm, turns out the host do have some leeway on how to run the challenge.So let's welcome the Vic Swisschamp family to join(XL, XLT, XVAT, XXLT), and Wenger Tool Chest family(Tool Chest plus, Matterhorn, Snap Shackle and SGT fix it)!

-
Very nice! -
Very handsome, Gordon. Now you can turn something else into a Silvertech. Best wishes. G

-
@LoopCutter said:
Well the results are complete![attach id=0 msg=2588629]
From SIVERtech to SAPPHIRE
[attach id=1 msg=2588629]
[attach id=2 msg=2588629]
Thank you.

Nice!

-

My new sheath for my SwissChamp has arrived! I think I'm going to do the whole challenge with the one knife, even though I have some others that may qualify.
As long as we're throwing out opinions, my personal take is that the true spirit of this challenge is to carry anything with at least 6 layers (or at the very least, is at as thick as one with 6 layers). I think a Cybertool-S shouldn't really count for that reason, but I've never had one so I don't know how thick it actually feels when carried. On the other hand, I also have a Wenger Monarch and a Vic Outdoorsman that feel like they really should qualify, but the rules as written exclude them. Regardless, it doesn't really matter, because I'm going to carry a regular Swiss Champ.
In the end, I think what's important is that people carry some big chonker SAKs and use some tools. And of course, have fun!
-
@LoopCutter said:
Well the results are complete!From SIVERtech to SAPPHIRE
Thank you.


-
Another way around the badge issue is to have a completely different badge made up, such as the Pocket Giant Challenge, which would cover anything with 6 layers and up. As long as we have at least 10 people in a challenge, it's an option.
-
My new sheath for my SwissChamp has arrived! I think I'm going to do the whole challenge with the one knife, even though I have some others that may qualify.
As long as we're throwing out opinions, my personal take is that the true spirit of this challenge is to carry anything with at least 6 layers (or at the very least, is at as thick as one with 6 layers). I think a Cybertool-S shouldn't really count for that reason, but I've never had one so I don't know how thick it actually feels when carried. On the other hand, I also have a Wenger Monarch and a Vic Outdoorsman that feel like they really should qualify, but the rules as written exclude them. Regardless, it doesn't really matter, because I'm going to carry a regular Swiss Champ.
In the end, I think what's important is that people carry some big chonker SAKs and use some tools. And of course, have fun!
I agree on the CT-S. But, it qualifies only because the rules specifically state that any variety of CT qualifies.
The Monarch has 7 layers, so it qualifies. -
@Barry Rowland said:
Another way around the badge issue is to have a completely different badge made up, such as the Pocket Giant Challenge, which would cover anything with 6 layers and up. As long as we have at least 10 people in a challenge, it's an option.I'm open to that, if anyone wants to take it up. It would mean two new badges though; a 30 and a 60.
-
@mathmitch7 said:
I think a Cybertool-S shouldn't really count for that reason, but I've never had one so I don't know how thick it actually feels when carried.It feels like a 4-layer, since the main blade layer and opener layer are both normal layers, and the bit driver is effectively about twice as thick as a typical layer.
CT-S is the only one of the CT family I would actually consider carrying in pocket.

-
I fail to see what the issue is anyway. The way I'm doing it is pretty much the way it was done in 2020, when all this stuff was hashed out. I just clarified it by saying 85mm and up, 6 layers and up, and meeting the spirit of the challenge (bulky and a lot of tools). There was at least one comment in 2020 about making it 7 layers and up, but there are three named models (Champion A, Champion B, Cybertool Lite) with six layers. Bottom line for me is, if it is at least as big, heavy and feature-rich as an original Champion, it qualifies.
If I were going to create a new badge, I wouldn't disqualify models that meet the "stack" description. I would disqualify the Cybertool S (29) and Cybertool M (34). They're in because they are specifically named. The CT-S is thinner, lighter and has fewer tools than my Deluxe Tinker, yet it's in and the DT is out (rightfully so).
Since this is at its core a challenge to carry (not just display) a SAK that is bigger and bulkier than a large percentage of SAK fans would normally carry, let's concentrate on that.And, on that subject I want to discuss one knife that I intend to include. In fact I went ahead and bought one (wanted one anyway) specifically to include in the Challenge. That is the 111mm Work Champ. It is part of the Champion family, (even has Champ in its name) and its toolset puts it squarely in line with the spirit of the challenge. In fact it has the same toolset, plus a couple of additional tools, as the original Champion (both versions).
-
@nate j said:
It feels like a 4-layer, since the main blade layer and opener layer are both normal layers, and the bit driver is effectively about twice as thick as a typical layer.CT-S is the only one of the CT family I would actually consider carrying in pocket.

It might feel like a 4 layer, but it is still thinner and lighter than a Deluxe Tinker or Deluxe Climber.
I agree with you. If anyone wants to carry a CT-S for this challenge, I've no problem with it. But to me it would feel like cheating. -
I have the Work Champ too, and use it more than any other SAK save my lanyard Classic right now

The mods give a lot of latitude on the badges. I've hosted the SAK Stack Challenge more times than I can remember and I've never had a problem before.
Part of the issue is that, prior to Nix, I don't think (and I could be completely wrong but I've been around awhile) anyone hosted a 111 Challenge before, but they did host a Swiss Champ Challenge. The badge was made up for the specific challenge, not the other way around. When I hosted these challenges, if it looked like a Swiss Champ, it counted. That included CTs, Wenger, etc. My advice is simply to message a Mod and ask. -
@WECSOG said:
It might feel like a 4 layer, but it is still thinner and lighter than a Deluxe Tinker or Deluxe Climber.
I agree with you. If anyone wants to carry a CT-S for this challenge, I've no problem with it. But to me it would feel like cheating.I definitely agree on the CT29 but, on the other hand, CT34 (CT-M) shouldn't feel like cheating. Yes, it's 5 layers technically, but is the same width as a 7-layer (6.5 layer?) Champion C, but you would disqualify it under a new badge?

I'm not commenting to nit-pick or sway you one way or the other, especially since I'm not even participating. :P I understand the rule has to be stated somehow and I suppose it would be silly to say "any SAK wider than Xmm". The variations in widths of layers can make the discussion a bit confounding, especially considering the way the challenge was previously defined...
-
I support the "interpret" (and ask mods to rewrite the description if we really feel it neccesary) the challenge as anything 6+ theory. A new badge feels like it's splitting hairs (we already have Stack and Mad Max), and 6 layers is a clean and objective split (vs going by thickness, which can be affected by scales, etc.)
Either way, I'll actually be going for the Discontinued badge month one with some older Champs/Toolchests. Not sure about the month two plan yet, so no skin in the game.
-
I WAS looking forward to this challenge, as a chance to utilize and learn about others experiences with their same size SAK.
NOW THE TOPIC HAS TWISTED A BIT AS TO
WHAT CAN BE INCLUDED OR QUALIFIES. WHAT THE BADGE GUIDELINE AND WHAT WAS ALLOWED IN YHE PAST.Why not just state what tool you plan to utilize, by your name, and if you do use another, it is that members responsibility to include the tool’s identity and layers in that days post. If it does qualify then it will called out by the host at that time.
- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30). (SwissChamp)
- BPRoberts (30)
- MrToolJunkie (60)
- Alan K. (30 up to 60)
Just an idea, taken from the BARLOW Challenge.
Some contributions a member thought was a BARLOW, learned that their knife was a JACK KNIVE, or not a barlow just because it was not!IN REGARDS TO THIS SAK Challenge; Right now the inclusion models is quite confusing, as the models described are not even known by this humble member.
-
@NutSAK said:
I definitely agree on the CT29 but, on the other hand, CT34 (CT-M) shouldn't feel like cheating. Yes, it's 5 layers technically, but is the same width as a 7-layer (6.5 layer?) Champion C, but you would disqualify it under a new badge?
I'm not commenting to nit-pick or sway you one way or the other, especially since I'm not even participating. :P I understand the rule has to be stated somehow and I suppose it would be silly to say "any SAK wider than Xmm". The variations in widths of layers can make the discussion a bit confounding, especially considering the way the challenge was previously defined...
I don't feel like the CT-M would be cheating. In fact, as I stated before, I wouldn't say anyone else is cheating if they bring a CT-S to the table. The rules allow it. Perhaps "cheating" is too strong of a word, so let me rephrase it: the CT-S wouldn't be my choice because I routinely carry knives larger than the CT-S. In a way it's a good thing that it is included, because there are potential participants who work in an environment where even the CT-S is stretching it. For those folks, the CT-S (if you have or can find one) is a good way to participate in this challenge because it is more capable than any other SAK of its size.
The idea of creating another badge is not something I am advocating for; it was just an idea another member floated. What would and would not be included was pure conjecture on my part, and was based entirely on eliminating any outliers from the basic 6+ layer description.
As it is, I think this is a great challenge and I don't want to take anything out of it nor make it anything it's not. I also don't want to disqualify anything that fits the spirit of the challenge, just because it doesn't carry the right name. Wenger Monarch, for example.
@BPRoberts said:
I support the "interpret" (and ask mods to rewrite the description if we really feel it neccesary) the challenge as anything 6+ theory. A new badge feels like it's splitting hairs (we already have Stack and Mad Max), and 6 layers is a clean and objective split (vs going by thickness, which can be affected by scales, etc.)Either way, I'll actually be going for the Discontinued badge month one with some older Champs/Toolchests. Not sure about the month two plan yet, so no skin in the game.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



