Some Basic Tool Truths Everyone Should Be Aware Of
-
@american lockpicker said:
@Grant Lamontagne said:
I don't know about that one- I'd take a Flik over an MPT any day...
Def
I agree thats why I put "usually" in there.
Which then pretty much makes your statement useless then does it not?
Here's one, decent tools can be made in any country, including China ;), if good quality and control measures are put in place. When looking at tools, look at the things that matter, not where the thing is made and if you do have concerns, use the search function on the forum and look up the specific tool or start a thread asking about it before ruling it out.
Not trying to start an arguement but the majority(99%) of junk multitools do come from China its a fact. I started out with knockoffs SAKs and later PSTs and the quality was so bad it made me have no faith in the multitool concept. If your starting out get a Victorinox its made right in Switzerland(best quality in the world) and they have a wide selection of tools for what ever you need and aren't prone to breaking and if something does they have excellent customer service. I'm sure there are now some acceptable chinese tools but why waste your money trying to find one.
-
@american lockpicker said:
@american lockpicker said:
@Grant Lamontagne said:
I don't know about that one- I'd take a Flik over an MPT any day...
Def
I agree thats why I put "usually" in there.
Which then pretty much makes your statement useless then does it not?
Here's one, decent tools can be made in any country, including China ;), if good quality and control measures are put in place. When looking at tools, look at the things that matter, not where the thing is made and if you do have concerns, use the search function on the forum and look up the specific tool or start a thread asking about it before ruling it out.
Not trying to start an arguement but the majority(99%) of junk multitools do come from China its a fact. I started out with knockoffs SAKs and later PSTs and the quality was so bad it made me have no faith in the multitool concept. If your starting out get a Victorinox its made right in Switzerland(best quality in the world) and they have a wide selection of tools for what ever you need and aren't prone to breaking and if something does they have excellent customer service. I'm sure there are now some acceptable chinese tools but why waste your money trying to find one.
Not wanting to get in a China flame war so I will keep my comments brief. Just because it is Chinese does not mean it is crap. Truthfully, China is getting better and better at creating a quality product for very little money. Things that come to mind; Benchmade Red Box knives, Spyderco's Byrd line, Some of Spyderco's main line (Tenacious, Spyderwrench, etc). There are also some very promising steels coming out of China, that will help keep knife and tool costs down, but provide a very workable and durable steel for the end user-us. Every manufacturer wants to make a quality product for as little as possible; one to make more profit, and two to make consumers pick their product over any other. The majority of the sheaths our multi's come in are Made in China, but I wouldn't knock their quality. I am all for making products in the USA, but until they can make them cheaper they will always have a hard time keeping up.
-
- The first rule of multitools. Don't talk about multitools.
Wait scratch that, preach the word! Everyone needs at least one! Everyone I know who didn't think they were useful, I let them carry one of mine for a bit...that changed their tune.
-
@american lockpicker said:
@american lockpicker said:
@Grant Lamontagne said:
I don't know about that one- I'd take a Flik over an MPT any day...
Def
I agree thats why I put "usually" in there.
Which then pretty much makes your statement useless then does it not?
Here's one, decent tools can be made in any country, including China ;), if good quality and control measures are put in place. When looking at tools, look at the things that matter, not where the thing is made and if you do have concerns, use the search function on the forum and look up the specific tool or start a thread asking about it before ruling it out.
Not trying to start an arguement but the majority(99%) of junk multitools do come from China its a fact. I started out with knockoffs SAKs and later PSTs and the quality was so bad it made me have no faith in the multitool concept. If your starting out get a Victorinox its made right in Switzerland(best quality in the world) and they have a wide selection of tools for what ever you need and aren't prone to breaking and if something does they have excellent customer service. I'm sure there are now some acceptable chinese tools but why waste your money trying to find one.
Getting a bit bored with all this now ALP if I am honest. My point was, in a thread headed "Some basic tool truths everyone should be aware of" the advice of "usually...." is not that particularly helpful. We ALL know where you stand on the China thing buddy, so maybe ease up on forcing it all down our necks all the time?
-
@american lockpicker said:
@american lockpicker said:
[quote author=Grant Lamontagne link=topic=15259.msg289617#msg289617 date=1258607363]
I don't know about that one- I'd take a Flik over an MPT any day...Def
I agree thats why I put "usually" in there.
Which then pretty much makes your statement useless then does it not?
Here's one, decent tools can be made in any country, including China ;), if good quality and control measures are put in place. When looking at tools, look at the things that matter, not where the thing is made and if you do have concerns, use the search function on the forum and look up the specific tool or start a thread asking about it before ruling it out.
Not trying to start an arguement but the majority(99%) of junk multitools do come from China its a fact. I started out with knockoffs SAKs and later PSTs and the quality was so bad it made me have no faith in the multitool concept. If your starting out get a Victorinox its made right in Switzerland(best quality in the world) and they have a wide selection of tools for what ever you need and aren't prone to breaking and if something does they have excellent customer service. I'm sure there are now some acceptable chinese tools but why waste your money trying to find one.
Not wanting to get in a China flame war so I will keep my comments brief. Just because it is Chinese does not mean it is crap. Truthfully, China is getting better and better at creating a quality product for very little money. Things that come to mind; Benchmade Red Box knives, Spyderco's Byrd line, Some of Spyderco's main line (Tenacious, Spyderwrench, etc). There are also some very promising steels coming out of China, that will help keep knife and tool costs down, but provide a very workable and durable steel for the end user-us. Every manufacturer wants to make a quality product for as little as possible; one to make more profit, and two to make consumers pick their product over any other. The majority of the sheaths our multi's come in are Made in China, but I wouldn't knock their quality. I am all for making products in the USA, but until they can make them cheaper they will always have a hard time keeping up.
[/quote]Chinese companies are all for business, just give them how much you are willing to buy a product and they will make the product for the price you want inclusive of their cost. Most companies choose to buy at the lowest cost of course quality suffers.
-
So, any more basic tool truths we should all be aware of?
-
Sebenza's are the only thing that will rid evil spirits from a home...its true I saw it on Bladeforums.
-
Must just be the large one's as the wife has no problems living here. :P
-
When I worked as a purchaser for an electronics manufacturing company in BC, Canada, we found places that would provide us superior quality product at lower prices made in China as long as we placed larger orders. The local supplier could not compete with quality, price or lead time on those quantities, so we went with made in China. Any bad parts were refunded provided we proved it was not design related, and actually a manufacturing flaw, in which case they would ship us replacements immediately.
The parts in question were circuit boards, something that is very complex, and can go wrong very easily. The Chinese ones were gold plated contacts and the quality was top notch.
While I'm sure there are manufacturers that have lower standards with even lower prices, sometimes it really is you get what you pay for... if you go for the absolute cheapest, there's probably a good reason.
it's the difference between a box of generic wine and a nice bottle of Gran Reserva Rioja.
-
@andrea.from.roma said:
Rust resistance is a key factor unless either you do like rust or live in a non-moist environment (aka the moon).This is not true.............................................. The moon is not a non-moist environment. :rofl:
-
I'd always advise people to think about what tools they will ever be likely to use and work up from there.
For example, do you really need all the bells and whistles of a Surge or will a simple Kick get you by? Now it may be that blade exchanger and outside blades etc are just what you are after, but that's not the case for everyone. If all you need are a couple of driver and a pair of pliers then there is nothing wrong with a Kick.

-
@Benner said:
So, any more basic tool truths we should all be aware of?This may be a bit backwards, because I'm a bit backwards, but if you're a newbie to tools at all, don't let multitools prevent you from picking up regular tools. I remember when I got my Husky, I thought it would be the only wrench I'd ever need because why would you want a wrench that wasn't also a knife and pliers. Let your multitool be the start of your toolbox, not the entire thing. (I think that may be the first thing Grant said in the original post, just backwards.)
Also, if you're going to carry a bag, don't be overly concerned about the weight of your multitool. If you're lugging a bag, a few more ounces won't be unmanageable.
-
So, any more basic tool truths we should all be aware of?
This may be a bit backwards, because I'm a bit backwards, but if you're a newbie to tools at all, don't let multitools prevent you from picking up regular tools. I remember when I got my Husky, I thought it would be the only wrench I'd ever need because why would you want a wrench that wasn't also a knife and pliers. Let your multitool be the start of your toolbox, not the entire thing. (I think that may be the first thing Grant said in the original post, just backwards.)
Also, if you're going to carry a bag, don't be overly concerned about the weight of your multitool. If you're lugging a bag, a few more ounces won't be unmanageable.
You are absolutely right on the dedicated tool thing.
And when it comes to weight, I've personally never considered it an issue as I carry more pounds than I need to on my mid section than saving a couple ounces on a multitool would be able to offset!
Def
-
@jzmtl said:
and bypass cutter found on most MT's is not as strong as anvil cutter on dedicated pliers, you will damage it by cutting through thick steel wires.Just to split hairs, but the most heavy duty cutters for large gauge hardened wire and stranded aircraft cable use "shearing-type" bypass cutters, (Like on fencing pliers) not anvil cutters. Using anvil cutters on such material can damaged one's expensive, dedicated pliers (Like side-cutting Linesman's or Diagonal Cutting Pliers) Of course my my own personal rant are people who buy a $5 pair of dikes and expect them to work as well as a $25 pair from Klein.
However I really have to agree with you, while the cutters on one's multi will work once in a while or in a pinch on something way out of their league, in day to day use, that's just not what they are designed for.
As for laws, I think one of our best ones is:
What is the best multi tool? The one you have with you when you need it!
-
and bypass cutter found on most MT's is not as strong as anvil cutter on dedicated pliers, you will damage it by cutting through thick steel wires.
Just to split hairs, but the most heavy duty cutters for large gauge hardened wire and stranded aircraft cable use "shearing-type" bypass cutters, (Like on fencing pliers) not anvil cutters. Using anvil cutters on such material can damaged one's expensive, dedicated pliers (Like side-cutting Linesman's or Diagonal Cutting Pliers) Of course my my own personal rant are people who buy a $5 pair of dikes and expect them to work as well as a $25 pair from Klein.
However I really have to agree with you, while the cutters on one's multi will work once in a while or in a pinch on something way out of their league, in day to day use, that's just not what they are designed for.
As for laws, I think one of our best ones is:
What is the best multi tool? The one you have with you when you need it!
Hmm I was under the impression that shear cutter was used on stranded cable because anvil cutter will squish it. I was more thinking of bolt cutters that are all anvil type, but I'm not an expert on tools so I could be wrong.
-
-
@american lockpicker said:
When in doubt get a Victorinox.
I gotta agree with this.
Here's another rule. Get more duck tape.
Heres another good thing that gets no mention on here JB Weld. Also Gorilla Tape is good.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login