"bits" of a larger project....
-
*Shortly after I started project Skeletool, I ordered the bit kit to expand its usefulness. While there were many bits I could make use of, I also found there were some I would probably never use at all. I do quite a bit of detailed work. I was disappointed that besides the eyeglasses bit, the smallest size for the flat was 3/32" and the smallest for the phillip was #0. Both of which were still too big for my needs. The eyeglasses bit was also too small for some jobs and not compatible with the Skeletool to begin with. I set out to fabricate a set of precision screwdrivers to fit the large bit driver. This was all before I even got a Wave and a Surge with the small bit driver. These bits turned out to be a blessing in disguise as they made the small bit driver obsolete on both tools, so I removed them, leaving me room to install something more useful and practical.....
~ evil ~
1.0mm, 1.5mm, 2.0mm flat head drivers
#00, #000, #0000 phillip head drivers


These bits are part of a project to fill both cards of the bit kit with bits I would actually put to use on a regular basis. I will post more of them here when I get a chance.....*
-
Credit to you for the workmanship but I personally find that when you get down to these kind of sizes that having a multitool as a handle is just too cumbersome. I'd also be terrified of breaking a bit after having spent so long making it :D
-
@Neil said:
Credit to you for the workmanship but I personally find that when you get down to these kind of sizes that having a multitool as a handle is just too cumbersome. I'd also be terrified of breaking a bit after having spent so long making it :D*Thank you. True, it can be a bit cumbersome and I do have dedicated tools for such things that I will bring with me if I know I will be needing them. I just believe in being prepared for just about anything that I typically come across, if possible... without having to lug around my toolbox :) I will often use the bit extender as a screwdriver handle minus the multitool and feels quite natural this way when dealing with such small screws. They are made of a good grade of metal and have been holding up very well. The flats were easy to make... the phillips, not so much lol
~ evil ~*
-
I understand where you're coming from :) and on the little screws I can see that just using the extender should work OK

-
Amazing work Mate!

-
Those look professionally done E
Are you milling away the excess metal, or grinding? -
Kudos

How about designing some one piece tools or something? You could certainly make them :D
-
@J-sews said:
Those look professionally done E
Are you milling away the excess metal, or grinding?*Thanks buddy. Old school and low tech here... grinding *
How about designing some one piece tools or something? You could certainly make them :D
*I have yet to get into the one piece tools. I know the atwoods are popular. Speaking for myself, if I had that much to spare for a tool, it'd be for a multitool as opposed to a one piece tool. I fabricate custom emblems/badges for show cars and race cars, so making one would not be so different other than the quality of the metal. If everyone pitches in ideas for the ultimate one piece tool, I would gladly try to make one when time permits.....
~ evil ~*
-
*Small but effective awl/reamer that also fits into the bit card. Double edged and blade sharp.....

The damage it can do. 1/4 inch plywood.....

~ evil ~*
-
-
Why didn't LM think of that.....

-
Those look professionally done E
Are you milling away the excess metal, or grinding?*Thanks buddy. Old school and low tech here... grinding *
Okay, I'm just thinking "go slow, keep it cool, and don't ruin the temper"
But you probably already thought of that

Indeed I have :) But thank you very much in case I didn't know any better
. Although I will admit that I had to learn those things the hard way over the years lol -
How do you know if you have ruined the metals temper

Can you re-temper metal if you have over heated it

I am about to do a bit of 'grinding' myself :D
-
very nice work evil

-
@MultiMat said:
How do you know if you have ruined the metals temper
Can you re-temper metal if you have over heated it

I am about to do a bit of 'grinding' myself :D
tempering toughens metal, so im guessing he s going to ruin that by heating it too much (annealing?) and make the metal hard and brittle if he isnt careful
correct me if im wrong ive only been studying this briefly
-
I think you are more or less right
By heating and letting it cool it 'softens' the metal (as you say annealing) you need to re-temper it by heating and quenching (you have to get this temperature correct)
but I am open to suggestions
-
Tempering is basically un-doing a tiny part of the heat treatment -- you're making it a little bit softer and less brittle.
Annealing is like tempering taken all the way -- it completely removes all of the heat treatment, making it a lot softer and less brittle.
-
So how hot can you subject a hardened bit of metal before it looses its temper

Is there an easy way of re treating the metal to regain its hardening if you have over heated it

When grinding/drilling hardened metal is water good enough as a coolant

Sorry for hijacking your excellent thread Evil but I have finally found a place I can buy some Carbide drill bits.
I have some old SAK blades that I am keen to reinvent >:D >:D :D :D -
what are you thinking of working on matt ?
-
I am hopping to pop a SAK saw into my LM Pulse & also hopping to modify some old SAK blades & make some crazy Micras :D.
Unfortunately 4mm & 5mm carbide drill bits cost $40us each in Oz & are special order items :( :(.
There was a trade speSmurfpillst, from Sutton drill bits, at the proper tool shop I went to & he suggested I use carbide tipped masonry drill bits 'just round the bits wings off a bit' ???. The masonry bits only cost $5 so I will try to mod them :ahhh , the speSmurfpillst said he used to do it all the time(he used to be a tool maker though :D :D). Not sure if my Dremal will be able to grind the bits wings
.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login