"bits" of a larger project....
-
Kudos

How about designing some one piece tools or something? You could certainly make them :D
-
@J-sews said:
Those look professionally done E
Are you milling away the excess metal, or grinding?*Thanks buddy. Old school and low tech here... grinding *
How about designing some one piece tools or something? You could certainly make them :D
*I have yet to get into the one piece tools. I know the atwoods are popular. Speaking for myself, if I had that much to spare for a tool, it'd be for a multitool as opposed to a one piece tool. I fabricate custom emblems/badges for show cars and race cars, so making one would not be so different other than the quality of the metal. If everyone pitches in ideas for the ultimate one piece tool, I would gladly try to make one when time permits.....
~ evil ~*
-
*Small but effective awl/reamer that also fits into the bit card. Double edged and blade sharp.....

The damage it can do. 1/4 inch plywood.....

~ evil ~*
-
-
Why didn't LM think of that.....

-
Those look professionally done E
Are you milling away the excess metal, or grinding?*Thanks buddy. Old school and low tech here... grinding *
Okay, I'm just thinking "go slow, keep it cool, and don't ruin the temper"
But you probably already thought of that

Indeed I have :) But thank you very much in case I didn't know any better
. Although I will admit that I had to learn those things the hard way over the years lol -
How do you know if you have ruined the metals temper

Can you re-temper metal if you have over heated it

I am about to do a bit of 'grinding' myself :D
-
very nice work evil

-
@MultiMat said:
How do you know if you have ruined the metals temper
Can you re-temper metal if you have over heated it

I am about to do a bit of 'grinding' myself :D
tempering toughens metal, so im guessing he s going to ruin that by heating it too much (annealing?) and make the metal hard and brittle if he isnt careful
correct me if im wrong ive only been studying this briefly
-
I think you are more or less right
By heating and letting it cool it 'softens' the metal (as you say annealing) you need to re-temper it by heating and quenching (you have to get this temperature correct)
but I am open to suggestions
-
Tempering is basically un-doing a tiny part of the heat treatment -- you're making it a little bit softer and less brittle.
Annealing is like tempering taken all the way -- it completely removes all of the heat treatment, making it a lot softer and less brittle.
-
So how hot can you subject a hardened bit of metal before it looses its temper

Is there an easy way of re treating the metal to regain its hardening if you have over heated it

When grinding/drilling hardened metal is water good enough as a coolant

Sorry for hijacking your excellent thread Evil but I have finally found a place I can buy some Carbide drill bits.
I have some old SAK blades that I am keen to reinvent >:D >:D :D :D -
what are you thinking of working on matt ?
-
I am hopping to pop a SAK saw into my LM Pulse & also hopping to modify some old SAK blades & make some crazy Micras :D.
Unfortunately 4mm & 5mm carbide drill bits cost $40us each in Oz & are special order items :( :(.
There was a trade speSmurfpillst, from Sutton drill bits, at the proper tool shop I went to & he suggested I use carbide tipped masonry drill bits 'just round the bits wings off a bit' ???. The masonry bits only cost $5 so I will try to mod them :ahhh , the speSmurfpillst said he used to do it all the time(he used to be a tool maker though :D :D). Not sure if my Dremal will be able to grind the bits wings
. -
The fella did not say anything about a pack of bits :(.
I found a 'Formula Cobalt' drill bit that MIGHT work , it is a high speed drill bit though
, I will see how it goes before grinding the masonry bit
.I wonder why you can only seem to get carbide drills bits ,on the net , in very small sizes

-
@MultiMat said:
How do you know if you have ruined the metals temper
Can you re-temper metal if you have over heated it

I am about to do a bit of 'grinding' myself :D
In regard to temper, etc... what they have all been saying is pretty spot on. My advice is to avoid ruining the temper to begin with at all costs, if possible. Even if it means taking five times as long to get the job done. To me, the time and effort spent to re-temper such small accessories for a multitool just wouldn't be worth it. I would just start from scratch and make another. However, if it were a blade, that might be different....
@MultiMat said:
Sorry for hijacking your excellent thread Evil but I have finally found a place I can buy some Carbide drill bits.*no worries Mat, it keeps the thread alive lol. Stainless steel can be quite the beast. I have been getting by with Ridgid cobalt drill bits. Economical and do a decent job. I'd be crying if I broke a $40 drill bit lol. I use various diamond and carbide bits for misc drilling, machining, cutting and shaping.....
*@MultiMat said:
I found a 'Formula Cobalt' drill bit that MIGHT work , it is a high speed drill bit though*Just remember, you don't want to drill at too high a speed. Are you using just a regular dremel? While they have the speed, they lack torque. You'd want something slower with more torque. A drill press would be ideal to keep holes straight and true.....
Did you ever get your airbrush Mat?*
-
Evil is it obvious when you have over heated something & it has lost its temper , how do you tell

Yesterday I lopped part of a SAK saw's tang off , the offcut was very hot ::) I had a damp rag which I was putting on the SAK saw & used my Dremal to do it.Yep $40 is too much for me for 1 drill bit & a brittle one at that :ahhh :ahhh :D. I hope the cobalt I got works out they are a lot cheaper :D
I have a drill press I am dying to put through its paces :D :D. How fast should I run the Cobalt drill bit
& what cooling agent should I use
, guy at the shop mentioned kerosene

Airbrush ::) I have the funds squirreled away, know which one to get (thanks mate :D) & a rough plan.
Missing the courage ::) :D.Current plan involves me getting the Pulse & a couple of Micras under my belt , if I am happy with my work I will tart them up with a bit of pimping :D :D -
Lot s of things can be used as a coolant
In engineering workshops on lathes an stuff they use a white water based coolant
you can buy proper cutting grease/oil (I will go see If I can find some names, temaxol springs to mind)
I have used three in one oil, car engine oil and even WD40 in an emergency
When I use my bench grinder/belt sander I have a cup of water next to it and dunk the metal often
As said above its better to take your time and not bugger up the steel
-
Set your drill to the lowest speed it will run at. If its a cheap job like mine that means lifting its lid and changing the belt position. I use Ruko Universal Drill Paste... looks like used brown lard to me ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login