"bits" of a larger project....
-
Lot s of things can be used as a coolant
In engineering workshops on lathes an stuff they use a white water based coolant
you can buy proper cutting grease/oil (I will go see If I can find some names, temaxol springs to mind)
I have used three in one oil, car engine oil and even WD40 in an emergency
When I use my bench grinder/belt sander I have a cup of water next to it and dunk the metal often
As said above its better to take your time and not bugger up the steel
-
Set your drill to the lowest speed it will run at. If its a cheap job like mine that means lifting its lid and changing the belt position. I use Ruko Universal Drill Paste... looks like used brown lard to me ;)
-
I used the stuff Neil uses years ago

I use this now (but I have run out) :-[
http://www.parkertools.co.uk/Product/0417211I have used this sort of thing in the past with a drill
http://www.toolbank.com/p/D5998/ROC53072So there are a lot of different makes and types out there I guess it doesn't matter so long as you use something and some must have made it down there to you Mat

Lard will also work! :ahhh
-
i used a tin of green stuff when i did workshop stuff works well it has a similar consistency to gel
-
@MultiMat said:
Evil is it obvious when you have over heated something & it has lost its temper , how do you tell
*Some signs are more obvious than others. Discoloration is often a tell-tale sign. If you are just going to constantly dip to keep the metal cool every so often, then water should suffice. If you are going to cool the metal as you are cutting there are many options as mentioned above. I always try to work cost-effectively. What I use is a mixture of water, oil and soap circulating through a cheap parts washer that I work over. The soap allows the oil to mix with the water... and for less than about 50 cents a gallon. Your mileage may vary.....
Like Neil said. If you have a drill press you will want to really crank down the speed. I have an old school drill press too where I have to lift the lid and change belt positions. I have even slowed mine down even more with an inline electronic speed control for when I work with other materials. While many will tell you that you need to let the tool do the work and this holds true the majority of the time, I have found that this is not always so when drilling through stainless. It takes considerable downward pressure in order to get the bit to bite and continually cut. You can have a new, sharp drill bit... without enough downward pressure you'll be there forever just spinning. Keep in mind these are just my opinions and things that have worked for me.....*
@MultiMat said:
Airbrush ::) I have the funds squirreled away, know which one to get (thanks mate :D) & a rough plan.
Missing the courage ::) :D.Current plan involves me getting the Pulse & a couple of Micras under my belt , if I am happy with my work I will tart them up with a bit of pimping :D :DDepending on which airbrush you end up with... if we ever do a sale or trade on here, I will throw in some accessories for you. I reprofile my own needles and fab my own crown tips, even custom handles for some of them.....
-
[i]This is a 1/4" socket driver bit that I made to fit into the bit card. I could of just ground the end of a standard 1/4" drive bit but the goal here was to have it fit into the bit card. If you ground the tip of a standard one flat, you would ruin the ball bearing/spring mechanism that holds a socket in place. I had found that some SOG's actually had something very similar to what I had in mind. I also found that it was a common complaint that the spring on it was prone to falling off fairly easy. After some trial and error, I came up with a stronger, thicker spring design that won't come off without using two implements to pry it off from both sides. I like it well enough that I just may make a permanent fold out version for my wave and my surge.....
~ evil ~
Close-up of spring mechanism.....

Here it is in the bit card.....

With a socket.....

-
@evil510 said:
[i]This is a 1/4" socket driver bit that I made to fit into the bit card. I could of just ground the end of a standard 1/4" drive bit but the goal here was to have it fit into the bit card. If you ground the tip of a standard one flat, you would ruin the ball bearing/spring mechanism that holds a socket in place. I had found that some SOG's actually had something very similar to what I had in mind. I also found that it was a common complaint that the spring on it was prone to falling off fairly easy. After some trial and error, I came up with a stronger, thicker spring design that won't come off without using two implements to pry it off from both sides. I like it well enough that I just may make a permanent fold out version for my wave and my surge.....~ evil ~
Close-up of spring mechanism.....

Here it is in the bit card.....

With a socket.....

That's awesome. You could make a killing selling those here.
-
Evil is it obvious when you have over heated something & it has lost its temper , how do you tell

*Some signs are more obvious than others. Discoloration is often a tell-tale sign. If you are just going to constantly dip to keep the metal cool every so often, then water should suffice. If you are going to cool the metal as you are cutting there are many options as mentioned above. I always try to work cost-effectively. What I use is a mixture of water, oil and soap circulating through a cheap parts washer that I work over. The soap allows the oil to mix with the water... and for less than about 50 cents a gallon. Your mileage may vary.....
Like Neil said. If you have a drill press you will want to really crank down the speed. I have an old school drill press too where I have to lift the lid and change belt positions. I have even slowed mine down even more with an inline electronic speed control for when I work with other materials. While many will tell you that you need to let the tool do the work and this holds true the majority of the time, I have found that this is not always so when drilling through stainless. It takes considerable downward pressure in order to get the bit to bite and continually cut. You can have a new, sharp drill bit... without enough downward pressure you'll be there forever just spinning. Keep in mind these are just my opinions and things that have worked for me.....*
@MultiMat said:
Airbrush ::) I have the funds squirreled away, know which one to get (thanks mate :D) & a rough plan.
Missing the courage ::) :D.Current plan involves me getting the Pulse & a couple of Micras under my belt , if I am happy with my work I will tart them up with a bit of pimping :D :DDepending on which airbrush you end up with... if we ever do a sale or trade on here, I will throw in some accessories for you. I reprofile my own needles and fab my own crown tips, even custom handles for some of them.....
Thanks for the tips , again :D
, Evil
.
I got a bottle of cutting/drilling lubricant that was not too dear. The drill bits I have got are Cobalt but described as 'High Speed drill bits'. Fast or slow on my Drill press (its a new made in China basic model press)
.I am fairly happy with the shaping I have done on my SAK saw into Pulse project , doing the locking groove is a real challenge. Trial & error have lead me to find the best Dremal cutting wheel (initially the wheel I was using was too thick).I am hopping on Sunday ,if I do not get called into work, I will drill the SAK saw & see how it fits :D :D.
Thanks for the trade offer Evil , I am still working up the courage to get the AirBrush ::) :D :D
BTW mate those modded bits look tops. Your mods are mighty impressive mate

-
@evil510 said:
[i]This is a 1/4" socket driver bit that I made to fit into the bit card. I could of just ground the end of a standard 1/4" drive bit but the goal here was to have it fit into the bit card. If you ground the tip of a standard one flat, you would ruin the ball bearing/spring mechanism that holds a socket in place. I had found that some SOG's actually had something very similar to what I had in mind. I also found that it was a common complaint that the spring on it was prone to falling off fairly easy. After some trial and error, I came up with a stronger, thicker spring design that won't come off without using two implements to pry it off from both sides. I like it well enough that I just may make a permanent fold out version for my wave and my surge.....Now that is a mod I could use!
Excellent work Evil

-
[i]This is a 1/4" socket driver bit that I made to fit into the bit card. I could of just ground the end of a standard 1/4" drive bit but the goal here was to have it fit into the bit card. If you ground the tip of a standard one flat, you would ruin the ball bearing/spring mechanism that holds a socket in place. I had found that some SOG's actually had something very similar to what I had in mind. I also found that it was a common complaint that the spring on it was prone to falling off fairly easy. After some trial and error, I came up with a stronger, thicker spring design that won't come off without using two implements to pry it off from both sides. I like it well enough that I just may make a permanent fold out version for my wave and my surge.....
Now that is a mod I could use!
Excellent work Evil

+1

-
Any plans on producing some of these for resale?
-
Mat here is a place that sells carbide bits for 20.00 http://www.brownells.com/.aspx/pid=6543/Product/3_FLUTE_CARBIDE_DRILL
I use Napa water soluble cutting and grinding oil #765-1526
-
[i]This is a 1/4" socket driver bit that I made to fit into the bit card. I could of just ground the end of a standard 1/4" drive bit but the goal here was to have it fit into the bit card. If you ground the tip of a standard one flat, you would ruin the ball bearing/spring mechanism that holds a socket in place. I had found that some SOG's actually had something very similar to what I had in mind. I also found that it was a common complaint that the spring on it was prone to falling off fairly easy. After some trial and error, I came up with a stronger, thicker spring design that won't come off without using two implements to pry it off from both sides. I like it well enough that I just may make a permanent fold out version for my wave and my surge.....
Now that is a mod I could use!
Excellent work Evil

+1

x2
amazing work evil 
-
[quote author=Mike 56 link=topic=19704.msg386239#msg386239 date=1276742859]
Mat here is a place that sells carbide bits for 20.00 http://www.brownells.com/.aspx/pid=6543/Product/3_FLUTE_CARBIDE_DRILLI use Napa water soluble cutting and grinding oil #765-1526
[/quoteThanks Mike
, I have found carbide tipped masonry bits work quite well :o 8).
Just lacking shed time :( :( -
@sawman said:
Any plans on producing some of these for resale?*Hey sawman. I just barely saw your post just now lol. At the moment, no, I simply don't have the means to do so... if I had a machine shop, I definitely would. This modding multitool stuff has started to snowball here in my real life and have had other people wanting me to mod theirs as well. It is a newfound hobby that I definitely wish I had more time for.....
~ evil ~*
-
yeah if you sold those scissors and awls I would be all over them like a fat kid on a birthday cake.
-
*Hey gang. Evil here again. With a lot of the work that I do, I am constantly getting metal splinters. I set out to fabricate a set of capable tweezers that would fit into the bit card. Small, yet grip very strong... tips tapered, ground and polished to grab even the smallest of splinters firmly.....
~ evil ~
Full view.....

Close-up view of tips.....

Installed in the bit card. Slot modded into a rectangular shape.....
* -
I can see how that could be extremely useful. Splendid work Evil

-
Very nice work once again Evil..

-
If I were Leatherman, I would hire someone like Evil even if I didn't use all their ideas. At least there'd be a panel of super creative people on the payroll and between all of them you could make the best possible multitools

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login