"bits" of a larger project....
-
Very nice work once again Evil..

-
If I were Leatherman, I would hire someone like Evil even if I didn't use all their ideas. At least there'd be a panel of super creative people on the payroll and between all of them you could make the best possible multitools

-
Clever idea

-
*I often use dental picks for various tasks, from daily cleaning jobs of airguns and airbrushes to replacing o-ring seals just to name a few. This is a double-ended pick that I fabricated to fit in the bit card. D2 toolsteel. I often misplace my picks, now I'll always have picks with me.....
~ evil ~
Full view.....

Another full view.....

Close-up of straight end.....

Close-up of curved end.....

* -
Sometimes nothing beats a pokey stick :DNice work as usual

-
Epic work as usual. I think I need to hire you to make a 154CM blade for the Squirt
-
You really do have some great ideas

I think the fitting stuff in to the bit card is also quite brilliant

-
Love the dental tool idea. Definitely a handy item to have
-
@Neil said:
Sometimes nothing beats a pokey stick :DNice work as usual

Thanks Neil! Yeah, you never know when you'll need to poke something.....
@Andreas said:
Epic work as usual. I think I need to hire you to make a 154CM blade for the SquirtThanks Andreas. Kinda ironic you should say that as I have recently acquired enough blade steel to fabricate new blades to replace all the blades on my Wave, Surge and Skeletool with blades of my own design. Due to workload though, it'll probably be a while before I can get around to doing so.....
@nuphoria said:
You really do have some great ideas
I think the fitting stuff in to the bit card is also quite brilliant

Thank you as always Nuphoria!.....
@TheRodfather said:
Love the dental tool idea. Definitely a handy item to haveYes, they have definitely proven handy.....
-
Every time I think you've come up with the last possible useful item that would fit in a bit card Evil, you show us another one!
Impressive work and impressive ideas. 
-
Very nice. You do stellar work

-
Outstanding as usual. You're going to need to hit the lotto to get all them patents!
Now how about a back-scratcher attachment? ;)
-
I actually have a bit card tool that you're missing though! A pry bar :D

Used this quite a few times, and even though it's not as nice as something you would make from scratch from much better steel it hasn't given out on me yet.
-
@J-sews said:
Every time I think you've come up with the last possible useful item that would fit in a bit card Evil, you show us another one!
Impressive work and impressive ideas. 
Thank you Bob! I am always thoroughly impressed with all of your work

Thank you Shane!
@Xelkos said:
Outstanding as usual. You're going to need to hit the lotto to get all them patents!Now how about a back-scratcher attachment? ;)
Thank you Xelkos. The patent process isn't cheap, that's for sure. I am only considering a select few at the moment. Sorry, no back-scratcher, how about a glass scratcher? I am making a glass cutter for the bit card for someone.....
@Andreas said:
I actually have a bit card tool that you're missing though! A pry bar :DNice mod there Andreas. Actually, I do have one ;) I just haven't finished the other side of the bit yet. Once that is done, I will share it with you all.....
COMING SOON: Gonna be posting a custom bit card.....
-
i thought the dental pick was an evil looking can opener to begin with
:D -
*Hey gang. Evil here yet again. If you've followed my posts, you'll know that I have removed the small bit driver and can openers from my Wave and my Surge. The small bit driver, obsolete since creating the precision bits for large bit driver. As for the can opener... I use a can opener next to never, however, I live by the mentality of always being prepared and don't like being without one. At first I made can openers to slip and lock into the ends of the Wave and Surge where the clip would normally go. This kind of left my Skeletool out of the loop if I wanted to open up cans. My bit cards follow me 100% of the time if I am carrying a tool with a bit driver. So, creating something for the bit card was in order. It would be able to be used for my Wave, Surge, Skeletool and my new pocket knife project. So, I set out to make a double ended bit with both a bottle opener and a can opener. I opted to use D2 toolsteel for this particular bit. Making either or may sound simple enough until you consider the room in which I have to work with.....
~ evil ~
The bottle opener was pretty straight forward, taking cues off of an old aluminum bottle opener that has served me well over the years. With a sharpened lip it grabs wonderfully. Simple yet very efficient. If you invert it, it doubles as a great beverage tab lifter.....
*

Lifting off a cap.....

Closer view.....

Lifting tab of beverage can.....

*Ok, the bottle opener was the easy half of this project. As for the can opener... there were actually a lot of issues. If you look at the design of the can opener of most all multitools the throat itself in which you insert the lip of the can is fairly deep. These can openers are quite long as well with a large deep hook to have enough purchase on the bottom edge of the lip. Keep in mind that all of these bit mods I have been doing have to fit in a very small area of 1/4" height, 1/8" thickness and 7/16" depth... not very much room at all. It took me three prototypes to finally come up with a compact design that was efficient and functional. Simply miniaturizing the design of the standard multitool can opener was not a viable option. Because of the limitation of the depth of the throat, it teeter tottered in trying to cut and grab. Enter the P-38. The old tried and true military issue can opener that has stood the test of time. While it uses the same principle of a hook and blade, if differs in the way it grabs the lip of the can. The hook on a multitool can opener faces forward and grabs at an angle, this is part of what takes up a lot of that precious real estate that I need in order to make one of this size. The P-38 grabs the lip from the side, almost at a right angle. I actually find this more efficient, reliable and also gave me room to move the hook farther back. So, in taking cues off of both designs, I came up with my own..... For my new can opener, I designed a hook that is turned inwards, that grabs the lip at right angle and a cutting edge with a chisel grind. I know it may not look like much, but believe me, a lot of thought and work went into this little thing lol. Quite a bit of work for such a small piece that I won't use very often, however, I know that if/when the time arises that I ever needed one, I will be thankful that I made this. Ok, onward with the mod.....
I had to deal with a lot of complex angles in getting this this to perform just right. Up top is the chisel edge blade. I know it is difficult to tell from the photo, but the hook you see there is turned inwards towards the lip of the can. At the bottom you see a large bevel that was required for the can opener to follow the circular edge of the can when in use. You'll be better able to tell in the next photo the angle in which it works.....*

*
Here is a view from the top. As you can see the whole can opener is angled. The cutting edge stays parallel to the lip of the can while the hook grabs the underside from a 90 degree angle.....*

*
Here is a view of the backside. You can better see the curve of the tool from this angle as well as a rear view of the hook.....*

*
Granted, the cut is only 3/16" per cut, however it does it well and it does it efficiently. Considering the can opener itself isn't much bigger than the average pinky fingernail, I think that is quite good. I don't use one all too often so this works out perfectly for me. The bottom line is it works. Photo of testing phase before I added bottle opener to other end.....*

So there you have it folks. My version of a bottle opener and can opener all in one compact package that fits inside of the bit card..... ;)
-
Awesome as always! Think I know what kind of bottle opener you used as a model, looks very professional. I don't use either a can opener nor bottle opener myself, ever, but I can see how they are useful to have even if you just use it rarely :D
-
Another excellent idea, well executed sir

You need to stop showing us all these goodies or start taking orders for them :D
-
@Andreas said:
Awesome as always! Think I know what kind of bottle opener you used as a model, looks very professional. I don't use either a can opener nor bottle opener myself, ever, but I can see how they are useful to have even if you just use it rarely :DThanks Andreas! I use them both rarely as well. People in my real life know I always have a multitool on me. They figure I am prepared for anything. Can you imagine the scoffing if I weren't even able to open a bottle or a can lol.....
@nuphoria said:
Another excellent idea, well executed sir
You need to stop showing us all these goodies or start taking orders for them :D
*Thanks Nuphoria! As for orders...maybe one day ;) *
@Xelkos said:
Another excellent idea, well executed sir

You need to stop showing us all these goodies or start taking orders for them :D
Me and my
concur!Thanks Xelkos!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login