"bits" of a larger project....
-
Mat here is a place that sells carbide bits for 20.00 http://www.brownells.com/.aspx/pid=6543/Product/3_FLUTE_CARBIDE_DRILL
I use Napa water soluble cutting and grinding oil #765-1526
-
[i]This is a 1/4" socket driver bit that I made to fit into the bit card. I could of just ground the end of a standard 1/4" drive bit but the goal here was to have it fit into the bit card. If you ground the tip of a standard one flat, you would ruin the ball bearing/spring mechanism that holds a socket in place. I had found that some SOG's actually had something very similar to what I had in mind. I also found that it was a common complaint that the spring on it was prone to falling off fairly easy. After some trial and error, I came up with a stronger, thicker spring design that won't come off without using two implements to pry it off from both sides. I like it well enough that I just may make a permanent fold out version for my wave and my surge.....
Now that is a mod I could use!
Excellent work Evil

+1

x2
amazing work evil 
-
[quote author=Mike 56 link=topic=19704.msg386239#msg386239 date=1276742859]
Mat here is a place that sells carbide bits for 20.00 http://www.brownells.com/.aspx/pid=6543/Product/3_FLUTE_CARBIDE_DRILLI use Napa water soluble cutting and grinding oil #765-1526
[/quoteThanks Mike
, I have found carbide tipped masonry bits work quite well :o 8).
Just lacking shed time :( :( -
@sawman said:
Any plans on producing some of these for resale?*Hey sawman. I just barely saw your post just now lol. At the moment, no, I simply don't have the means to do so... if I had a machine shop, I definitely would. This modding multitool stuff has started to snowball here in my real life and have had other people wanting me to mod theirs as well. It is a newfound hobby that I definitely wish I had more time for.....
~ evil ~*
-
yeah if you sold those scissors and awls I would be all over them like a fat kid on a birthday cake.
-
*Hey gang. Evil here again. With a lot of the work that I do, I am constantly getting metal splinters. I set out to fabricate a set of capable tweezers that would fit into the bit card. Small, yet grip very strong... tips tapered, ground and polished to grab even the smallest of splinters firmly.....
~ evil ~
Full view.....

Close-up view of tips.....

Installed in the bit card. Slot modded into a rectangular shape.....
* -
I can see how that could be extremely useful. Splendid work Evil

-
Very nice work once again Evil..

-
If I were Leatherman, I would hire someone like Evil even if I didn't use all their ideas. At least there'd be a panel of super creative people on the payroll and between all of them you could make the best possible multitools

-
Clever idea

-
*I often use dental picks for various tasks, from daily cleaning jobs of airguns and airbrushes to replacing o-ring seals just to name a few. This is a double-ended pick that I fabricated to fit in the bit card. D2 toolsteel. I often misplace my picks, now I'll always have picks with me.....
~ evil ~
Full view.....

Another full view.....

Close-up of straight end.....

Close-up of curved end.....

* -
Sometimes nothing beats a pokey stick :DNice work as usual

-
Epic work as usual. I think I need to hire you to make a 154CM blade for the Squirt
-
You really do have some great ideas

I think the fitting stuff in to the bit card is also quite brilliant

-
Love the dental tool idea. Definitely a handy item to have
-
@Neil said:
Sometimes nothing beats a pokey stick :DNice work as usual

Thanks Neil! Yeah, you never know when you'll need to poke something.....
@Andreas said:
Epic work as usual. I think I need to hire you to make a 154CM blade for the SquirtThanks Andreas. Kinda ironic you should say that as I have recently acquired enough blade steel to fabricate new blades to replace all the blades on my Wave, Surge and Skeletool with blades of my own design. Due to workload though, it'll probably be a while before I can get around to doing so.....
@nuphoria said:
You really do have some great ideas
I think the fitting stuff in to the bit card is also quite brilliant

Thank you as always Nuphoria!.....
@TheRodfather said:
Love the dental tool idea. Definitely a handy item to haveYes, they have definitely proven handy.....
-
Every time I think you've come up with the last possible useful item that would fit in a bit card Evil, you show us another one!
Impressive work and impressive ideas. 
-
Very nice. You do stellar work

-
Outstanding as usual. You're going to need to hit the lotto to get all them patents!
Now how about a back-scratcher attachment? ;)
-
I actually have a bit card tool that you're missing though! A pry bar :D

Used this quite a few times, and even though it's not as nice as something you would make from scratch from much better steel it hasn't given out on me yet.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login