Show your slip joint's thread!
-
@dks said:
Yes, I was pleasantly surprised with the stag on the Colt, I expected a much flatter looking stag, for the price and was quite suspicious of buying a knife with a gun brand name.Zed,
There have been stories of people skinning deer with a RR slipjoint so I think they can be used quite safely. I, too, tend to buy because I like, rather than need.:D im more of a user these days due to funds but if i like this RR i will get more and possibly even start a little collection
think ill be more whittling than skinning, poor bambie :D -
@NutSAK said:
You're a lucky man 2xTap!
can't wait for all the pics! ;)Well, the first one arrived today. The Case Classic, and it is sweet as hell! It's rainy here and overcast so I won't get no pics up today. But I''l have some soon.
dks,
Nice grabs bud. The new Colt slippies are real nice. Not sure if you know but that run you have of the Colt isn't real Stag. It's Black Stag Bone. They do have a line that is now discontinued that was done in real Stag, and they can still be found on Ebay at some dealers.
And nice comparison pics, thanks for sharing. The chinese built Kissing Cranes have really impressed me. I have a Humpback Jack in the same Bone that your Toothpick came in.
Real good knife. And speaking of KC, I just got one of their newest models, a 4-blade Scout Knife. Fit and Finish is very good on it. Hope to have pics of this soon.
Zed,
Good choice on your first Rough Rider. For inexpensive import pieces, overall, the Rough Riders are the best buy out there. I have a few of their Yellow Composition handled slippies, great knives for the money.
But the one thing about their composition handles is the color isn't always consistant throughout. You might see some slight variation in the yellow throughout the handle material. One of mine is like this. It's not splotchy but the color fades to lighter shades in some areas. And if you get to liking the RR's and plan to get some more I highly recommend looking at their Amber Jigged Bone line, the bone on these is real nice.
2xTap
-
You're a lucky man 2xTap!
can't wait for all the pics! ;)Well, the first one arrived today. The Case Classic, and it is sweet as hell! It's rainy here and overcast so I won't get no pics up today. But I''l have some soon.
dks,
Nice grabs bud. The new Colt slippies are real nice. Not sure if you know but that run you have of the Colt isn't real Stag. It's Black Stag Bone. They do have a line that is now discontinued that was done in real Stag, and they can still be found on Ebay at some dealers.
And nice comparison pics, thanks for sharing. The chinese built Kissing Cranes have really impressed me. I have a Humpback Jack in the same Bone that your Toothpick came in.
Real good knife. And speaking of KC, I just got one of their newest models, a 4-blade Scout Knife. Fit and Finish is very good on it. Hope to have pics of this soon.
Zed,
Good choice on your first Rough Rider. For inexpensive import pieces, overall, the Rough Riders are the best buy out there. I have a few of their Yellow Composition handled slippies, great knives for the money.
But the one thing about their composition handles is the color isn't always consistant throughout. You might see some slight variation in the yellow throughout the handle material. One of mine is like this. It's not splotchy but the color fades to lighter shades in some areas. And if you get to liking the RR's and plan to get some more I highly recommend looking at their Amber Jigged Bone line, the bone on these is real nice.
2xTap
cheers mate they seem spot on for the money,im looking forward to getting mine and ill take a look at the jigged boned line

-
@2xTap said:
But the one thing about their composition handles is the color isn't always consistant throughout. You might see some slight variation in the yellow throughout the handle material. One of mine is like this. It's not splotchy but the color fades to lighter shades in some areas. And if you get to liking the RR's and plan to get some more I highly recommend looking at their Amber Jigged Bone line, the bone on these is real nice.2xTap
Interesting... I was going to mention that the scales in the pic Zed posted above looked mottled, but I thought it might just be reflection or something.
Who manufactures the Colt line?
-
NutSAK,
I didn't notice it but now that you mentioned it I went back and looked at the pic and it sure does show some different coloring in the one section, a darker splotch just right of the shield. Some do come this way, not all, but some do.
As to the new Colt line of slippies. The license is now held by Smoky Mountain Knife Works, and the manufacturers they use over in China to build their Rough Rider line are the same ones building the Colt line for them.
2xTap
-
But the one thing about their composition handles is the color isn't always consistant throughout. You might see some slight variation in the yellow throughout the handle material. One of mine is like this. It's not splotchy but the color fades to lighter shades in some areas. And if you get to liking the RR's and plan to get some more I highly recommend looking at their Amber Jigged Bone line, the bone on these is real nice.
2xTap
[/quote]I noticed that on one of my RR's, the Barlow I got last week. There are a few brown, vein-like lines in some areas of one of the scales. Doesn't affect the knife one bit, and this one is a pure user, not for show. I'm loving it either way, it's been in my pocket daily. I'm thinking about one or two or five of the Amber Bone ones.....
-
2xtap, I assumed it was proper stag, I have also ordered one of the other, amber, stag models to see whether I like them. It should arrive soon. I am going through a “stag” phase. What is black stag bone? Stag shaped bone?
Zed, nutsak, jersey etc
The handles on the yellow Buck toothpick shown previously next to the Kissing Crane are also displaying this variation of colour mentioned with respect to the RR knives.
That knife, however, was one I had problems with (loose scales, oxidation) so I assumed that the variation of the colour was a problem, associated with the other problems I had (possible exposure to heat/sun/chemicals).
I actually had to take it apart, clean it and glue the scales back.Talking about RR knives their new, ocean models, look quite pleasant (but case gold models look even better…)

Their amber bone, as the one I have in a scout knife, looks really god in an old fashioned way.
-
@dks said:
2xtap, I assumed it was proper stag, I have also ordered one of the other, amber, stag models to see whether I like them. It should arrive soon. I am going through a “stag” phase. What is black stag bone? Stag shaped bone?Zed, nutsak, jersey etc
The handles on the yellow Buck toothpick shown previously next to the Kissing Crane are also displaying this variation of colour mentioned with respect to the RR knives.
That knife, however, was one I had problems with (loose scales, oxidation) so I assumed that the variation of the colour was a problem, associated with the other problems I had (possible exposure to heat/sun/chemicals).
I actually had to take it apart, clean it and glue the scales back.Talking about RR knives their new, ocean models, look quite pleasant (but case gold models look even better…)

Their amber bone, as the one I have in a scout knife, looks really god in an old fashioned way.
thanks for the info ill check its build when i get it, i ordered a RR peanut as well this am :D

-
dks,
Black Stag bone is nothing more than cattle bone with a jig pattern made to resemble the exterior of real Stag, and they use a black dye to bring out the jig.
And that Buck toothpick you mention as having the same color variation in it's yellow comp is likely because that particular yellow comp comes from the same source. The imported Buck slippies are made by the same people who build Rough Riders as well.
From my understanding Buck had a hand in getting the factory over in China that builds these up and going to produce their imported line to a particular standard. SMKW's with their longstanding association with Buck worked in with this factory to produce their Rough Rider line as well as their new licensed Colt stuff. This same factory also has produced some of the imported Remington knives as well as the Marble's Global Series.
2xTap
-
2x, at least its not plastic, made to look like stag. I noticed that if you rub it with tissue the dye comes, easily, off.
For the price I can´t really complain, it was about the same as the RR stockman.I find it funny that even though the Buck and RR knives come from the same factory, the Buck knives do not have that "mystery" grease/graphite/metal remains in their pivots, that I allways clean after I buy an RR knife.
-
@dks said:
2x, at least its not plastic, made to look like stag. I noticed that if you rub it with tissue the dye comes, easily, off.
For the price I can´t really complain, it was about the same as the RR stockman.I find it funny that even though the Buck and RR knives come from the same factory, the Buck knives do not have that "mystery" grease/graphite/metal remains in their pivots, that I allways clean after I buy an RR knife.
ill compare the RR stockman with the buck 303 i have, although the 303 is a U.S made one and a early model, HH sent me a email yesterday saying they made a mistake and they have no peanuts in stock so i have to wait 7-10 days :ahhh oh well i should get the RR stockman soon, :D
-
Well just had to wait 1 day from HH and the RR stockman arrived this am, im really impressed for the price, i would pay more TBH as there well made and look good to boot , cant wait to try it out, oh and it came sharp
glad i chose this as my first one and now looking forward to the peanut 





-
Looks good!
Nice pics Zed. -
Zed, really nice, RR seems to make these Sowbellies really well
. I have one and it looks and feels way more expensive than it is. I am scared to use it, in case it gets scratched.I, too, got some slipjoints I was interested in today.
An RR, naturally, Elephant toenail. This was a pattern I did not have and it looks huge. It needs some cleaning at the joints, but otherwise it’s fine. I see it more as a novelty knife; a canoe should do everything this does, in a more elegant package.
I also got a Colt peanut stag knife, that I was convinced (easily
) that I needed. The stag (assuming its not fancy cow bone) is deeply carved and caramel coloured and the knife feels well made. It was the cheapest caramel stag Colt model I could find, to see what they were like. It came in a fancy box,
It seems a bit large for a peanut.
The strange thing about it are the nail nicks on the blades. They are different on each blade (one is a long linear one, the other is crescent shaped) and because they are both on the same side the nail nick on the long blade is hidden behind the small blade, making it really awkward to open. I almost get the impression that they run out of blades and used the ones from a different model.
The bottom part of its frame is, reasonably, aligned with the stag scales and the blades are well centred.
It’s hard not to start getting a bit stricter with its overall quality since this series is beginning to approach, lower end, Case money.



-
There is some fine looking cutlery here! One of these nights when I get onto ebay I
just might pick up one of those fine looking Colt knives, I've none, and from what I've
seen here wow.I've two Case knives and have never been all that happy with either.
-
cheers DKS im really happy with it and look forward to more, im going to go for a colt at some point as HH does them and yours look sweet, also seen a make called lone wolf, they do some nice looking slippies including one with fake stag i like, its next on my list

-
Just doing our bit to help the economy Zed and Sean
:DI know what you mean about case, they are not pefect, but I love their sodbusters. The case peanut I have came with some minor paint remains on the blade.
-
@dks said:
Just doing our bit to help the economy Zed and Sean
:DI know what you mean about case, they are not pefect, but I love their sodbusters. The case peanut I have came with some minor paint remains on the blade.
they look very nice mate, i do like the case brand but out of my price bracket at this point, but i will try and get at least one

-
-
The steel, I find on mine to be hard to put a good edge on, corrosion on one of the blades
was a real disappointment, whatever ended up on it, a small spot of something ate
through the mirror finish.
Wobble on the main blade, I guess I just got some poor samples/examples as I'm not
going to go against what appears to be mainstream and put them down as a poor
company. :) I do love the look of their knives and the variety they offer in design
and scale material is amazing, which was why it was too bad when I got my examples
in hand. :-\
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


